Derivation of Thiem's formula Q = 2 (s1 - s2)/2.3 log10 (r2/r1) is based on the assumption (A) The aquifer is homogeneous, isotropic and of infinite depth and area (B) The well is sunk through the full depth of the aquifer (C) The flow lines are radial and horizontal, and the flow is laminar (D) All the above

Derivation of Thiem's formula Q = 2 (s1 - s2)/2.3 log10 (r2/r1) is based on the assumption 

(A) The aquifer is homogeneous, isotropic and of infinite depth and area 

(B) The well is sunk through the full depth of the aquifer 

(C) The flow lines are radial and horizontal, and the flow is laminar 

(D) All the above 

by

1 Answer

Answer :

(D) All the above 

by

Related questions

the derivation of Thiem's formula, Q = (S1 - S2)/[2.3 log10( / )] the following assumption is not applicable (A) The aquifer is homogeneous and isotropic (B) Flow lines are radial and horizontal (C) The slope of the water surface is too small (D) The well has been sunk up to the surface of the unconfined aquifer

Description : the derivation of Thiem's formula, Q = (S1 - S2)/[2.3 log10( / )] the following assumption is not applicable (A) The aquifer is homogeneous and isotropic (B) Flow lines are radial and ... the water surface is too small (D) The well has been sunk up to the surface of the unconfined aquifer

Last Answer : Answer: Option D

A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Description : A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Last Answer : Answer: Option D

The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from (A) Thiem's formula (B) Darcy's formula (C) Tolman's formula (D) Dupuits formula

Description : The discharge Q = 2 /2.3 log10 (R/rw) for the confined tube well is obtained from  (A) Thiem's formula  (B) Darcy's formula  (C) Tolman's formula  (D) Dupuits formula 

Last Answer : (D) Dupuits formula 

S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For discharge Q and coefficient of transmissibility T, the relationship, is (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1) (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) (C) S2 - S1 = (2.3Q/4 ) loge (t2/t1) (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Description : S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For  discharge Q and coefficient of transmissibility T, the relationship, is  (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1)  (B) S2 - S1 ... - S1 = (2.3Q/4 ) loge (t2/t1)  (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Last Answer : (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) 

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter by design, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter by design, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz supply ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: B

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration were in 180 degree error with those of the transmitter, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz connections to 'S1' and 'S2'. B. No action is needed as this is proper operation. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration were in 180 degree error with those of the transmitter, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz ... is proper operation. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: A

If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration were in 180 degree error with respect to that of the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is proper operation. B. Reverse the 60 Hz supply connections at 'R1' and 'R2'. C. Interchange connections 'S1' and 'S2'. D. Interchange connections 'S1' and 'S3'.

Description : If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration were in 180 degree error with respect to that of the transmitter, what corrective action should be taken? EL-0092 A. No action is ... and 'R2'. C. Interchange connections 'S1' and 'S2'. D. Interchange connections 'S1' and 'S3'.

Last Answer : Answer: B

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: C

If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration turned opposite of that in the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is normal operation. B. Reverse 60 Hz supply connections to 'R1' and 'R2'. C. Interchange connections to 'S1' and 'S2'. D. Interchange connections to 'S1' and 'S3'.

Description : If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration turned opposite of that in the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is ... . C. Interchange connections to 'S1' and 'S2'. D. Interchange connections to 'S1' and 'S3'.

Last Answer : Answer: D

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following statement is true? (1) Both S1 and S2 are conflict serializable. (2) S1 is conflict serializable and S2 is not conflict serializable. (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Description : Consider following schedules involving two transactions: S1: r1(X); r1(Y); r2(X); r2(Y); w2(Y); w1(X) S2: r1(X); r2(X); r2(Y); w2(Y); r1(Y); w1(X) Which of the following ... . (3) S1 is not conflict serializable and S2 is conflict serializable. (4) Both S1 and S2 are not conflict serializable.

Last Answer : S1 is not conflict serializable and S2 is conflict serializable.

The assumption in the theory of bending of beams is: (A) Material is homogeneous (B) Material is isotropic (C) Young's modulus is same in tension as well as in compression (D) All the above

Description : The assumption in the theory of bending of beams is:  (A) Material is homogeneous  (B) Material is isotropic  (C) Young's modulus is same in tension as well as in compression  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct assumption of the theory of simple bending (A) The value of the Young's modulus is the same in tension as well as in compression (B) Transverse section of a beam remains plane before and after bending (C) The material of the beam is homogeneous and isotropic (D) All the above

Description : Pick up the correct assumption of the theory of simple bending  (A) The value of the Young's modulus is the same in tension as well as in compression  (B) Transverse section of a beam remains ... bending  (C) The material of the beam is homogeneous and isotropic  (D) All the above

Last Answer : (D) All the above

Which of the following is not an assumption in derivation of torsion equation? a. Circular shaft remains circular after twisting b. Plane section of the shaft remain plane after twisting c. Material of shaft is isotropic d. Angle of twist is proportional to radius

Description : Which of the following is not an assumption in derivation of torsion equation? a. Circular shaft remains circular after twisting b. Plane section of the shaft remain plane after twisting c. Material of shaft is isotropic d. Angle of twist is proportional to radius

Last Answer : d. Angle of twist is proportional to radius

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by A. Chezy B. Manning C. Bazin D. Kutter

Description : If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by A. Chezy B. Manning C. Bazin D. Kutter

Last Answer : ANS: B

The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Last Answer : Answer: Option D

A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one element (s2) if δ(q, λ, b) is not empty then δ(q, c, b) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Description : A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one ... ) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Last Answer : (C) both s1 and s2

Given a grammar : S1→Sc, S→SA|A, A→aSb|ab, there is a rightmost derivation S1=>Sc =>SAC=>SaSbc. Thus, SaSbc is a right sentential form, and its handle is (A) SaS (B) be (C) Sbe (D) aSb

Description : Given a grammar : S1→Sc, S→SA|A, A→aSb|ab, there is a rightmost derivation S1=>Sc =>SAC=>SaSbc. Thus, SaSbc is a right sentential form, and its handle is (A) SaS (B) be (C) Sbe (D) aSb 

Last Answer : (D) aSb

weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Description : weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is A. w r S S B. w r1/2 C. w r S D. w r2/3

Last Answer : ANS: A

Which of the following statement(s) is/are true with respect to software architecture? S1: Coupling is a measure of how well the things grouped together in a module belong together logically. S2: Cohesion is a measure of the degree of interaction between software modules. S3: If coupling is low and cohesion is high then it is easier to change one module without affecting others. (1) Only S1 and S2 (2) Only S3 (3) All of S1, S2 and S3 (4) Only S1

Description : Which of the following statement(s) is/are true with respect to software architecture? S1: Coupling is a measure of how well the things grouped together in a module belong together logically. S2: Cohesion is a measure of the ... ) Only S1 and S2 (2) Only S3 (3) All of S1, S2 and S3 (4) Only S1

Last Answer : Answer: 2

As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow through 'R1' will equal the current flow through 'R2' C. the energy dissipated in 'R1' will be the same as the energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Description : As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow ... energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Last Answer : Answer: D

What is the current flow through R1 of the circuit illustrated if the resistance of R1 is 2 ohms, R2 is 3 ohms and R3 is 6 ohms with a 12 VDC battery? EL-0021 A. 2 amps B. 4 amps C. 6 amps D. 12 amps

Description : What is the current flow through R1 of the circuit illustrated if the resistance of R1 is 2 ohms, R2 is 3 ohms and R3 is 6 ohms with a 12 VDC battery? EL-0021 A. 2 amps B. 4 amps C. 6 amps D. 12 amps

Last Answer : Answer: C

Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Description : Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Last Answer : (D) All the above

While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

The assumption on which the trapezoidal formula for volumes is based, is (A) The end sections are parallel planes (B) The mid-area of a pyramid is half the average area of the ends (C) The volume of the Prismoidal is over-estimated and hence a Prismoidal correction is applied (D) All the above

Description : The assumption on which the trapezoidal formula for volumes is based, is (A) The end sections are parallel planes (B) The mid-area of a pyramid is half the average area of the ends (C) The volume of the Prismoidal is over-estimated and hence a Prismoidal correction is applied (D) All the above

Last Answer : (D) All the above

The direction of rotation of the winch shown in the illustration is changed by reversing the _____________. EL-0102 A. direction of current through the shunt field B. polarity of voltage at 'S1' and 'S2' C. direction of current through the armature D. polarity of voltage at 'L1' and 'L2'

Description : The direction of rotation of the winch shown in the illustration is changed by reversing the _____________. EL-0102 A. direction of current through the shunt field B. polarity of voltage at 'S1' and 'S2' C. direction of current through the armature D. polarity of voltage at 'L1' and 'L2'

Last Answer : Answer: C

How much current will flow in the illustrated circuit if the supply is 24 volts and the resistances of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 amps B. 6 amps C. 8 amps D. 10 amps

Description : How much current will flow in the illustrated circuit if the supply is 24 volts and the resistances of R1 is 3 ohms, R2 is 4 ohms, and R3 is 5 ohms? EL-0020 A. 2 amps B. 6 amps C. 8 amps D. 10 amps

Last Answer : Answer: A

Heat flow across a hollow sphere of inner radius 'r1' and outer radius 'r2' is directly proportional to (A) (r2- r1)/r1. r2 (B) r1. r2/(r2- r1) (C) (r2 + r1)/r1. r2 (D) r1. r2/(r2 + r1)

Description : Heat flow across a hollow sphere of inner radius 'r1' and outer radius 'r2' is directly proportional to (A) (r2- r1)/r1. r2 (B) r1. r2/(r2- r1) (C) (r2 + r1)/r1. r2 (D) r1. r2/(r2 + r1)

Last Answer : (B) r1. r2/(r2- r1)

Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the aquifer is 30 m/day and its porosity is 0.25, the time of travel of an inert tracer from one well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Description : Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the ... well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Last Answer : (b) 750 days

Law of diminishing marginal utility is based on the assumption that a. Tastes change over time b. Consumption is continuous c. Different units of goods consumed are homogeneous Of these statements: A.Only a is true B.a and c are true C.b and c are true D.All are true

Description : Law of diminishing marginal utility is based on the assumption that a. Tastes change over time b. Consumption is continuous c. Different units of goods consumed are homogeneous Of these statements: A.Only a is true B.a and c are true C.b and c are true D.All are true

Last Answer : D.All are true

A reinforced concrete beam is assumed to be made of (A) Homogeneous material (B) Heterogeneous material (C) Isotropic material (D) None of these

Description : A reinforced concrete beam is assumed to be made of  (A) Homogeneous material  (B) Heterogeneous material  (C) Isotropic material  (D) None of these 

Last Answer : (B) Heterogeneous material 

The materials which have the same elastic properties in all directions, are called (A) Isotropic (B) Brittle (C) Homogeneous (D) Hard

Description : The materials which have the same elastic properties in all directions, are called  (A) Isotropic  (B) Brittle  (C) Homogeneous  (D) Hard 

Last Answer : (A) Isotropic 

Darcy's law is applicable to seepage if a soil is (A) Homogeneous (B) Isotropic (C) Incompressible (D) All the above

Description : Darcy's law is applicable to seepage if a soil is (A) Homogeneous (B) Isotropic (C) Incompressible (D) All the above

Last Answer : (D) All the above

For the same draw down in two observations wells at distances r1 and r2, the times after start of pumping are t1 and t2 hours respectively. The relation which holds good is (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3 × t1 (D) t2 = (r2/r1) × t1 2

Description : For the same draw down in two observations wells at distances r1 and r2, the times after start of  pumping are t1 and t2 hours respectively. The relation which holds good is  (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3  × t1 (D) t2 = (r2/r1) × t1 2

Last Answer : (B) t2 = (r2/r1)² × t1

Normal depth in open channel flow is the depth of flow corresponding to (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Uniform flow

Description : Normal depth in open channel flow is the depth of flow corresponding to (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Uniform flow

Last Answer : Answer: Option D

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

The Prandtl mixing length is (A) Zero at the pipe wall and is a universal constant (B) Independent of radial distance from the pipe axis (C) Independent of the shear stress (D) Useful for computing laminar flow problems

Description : The Prandtl mixing length is (A) Zero at the pipe wall and is a universal constant (B) Independent of radial distance from the pipe axis (C) Independent of the shear stress (D) Useful for computing laminar flow problems

Last Answer : (D) Useful for computing laminar flow problems

In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, smaller will be the hydraulic gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Description : In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, ... gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Last Answer : Option A

Given the following Series S1 and S2: Write the command to find the sum of series S1 and S2 -Technology

Description : Given the following Series S1 and S2: Write the command to find the sum of series S1 and S2 -Technology

Last Answer : print(S1+S2)

If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions Statement 3 : The equations satisfying the condition are parallel Which of the above statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Description : If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions ... statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Last Answer : h) S2 only

If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions Statement 3 : The equations satisfying the condition are parallel Which of the above statements are true ? a) S1 only b) S1 and S2 c) S1 and S3 d) S2 only

Description : If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many ... parallel Which of the above statements are true ? a) S1 only b) S1 and S2 c) S1 and S3 d) S2 only

Last Answer : d) S2 only

With the inputs shown below, what will be the output of S1, S2, and C2?

Description : With the inputs shown below, what will be the output of S1, S2, and C2?

Last Answer : MSD of the sum.

32 With S2 closed and S1 open, the current waveform in the delta winding will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. only third-harmonic D. none of these

Description : 32 With S2 closed and S1 open, the current waveform in the delta winding will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. only third-harmonic D. none of these

Last Answer : C. Only third harmonic

[31] With both S1 and S2 open, the core flux waveform will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. peaky with third-harmonic D. none of these

Description : [31] With both S1 and S2 open, the core flux waveform will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. peaky with third-harmonic D. none of these

Last Answer : B. Flat topped with third harmonic

The statements s1 and s2 are given as: s1: Context sensitive languages are closed under intersection, concatenation, substitution and inverse homomorphism. s2: Context free languages are closed under complementation, substitution and homomorphism. Which of the following is correct statement? (A) Both s1 and s2 are correct. (B) s1 is correct and s2 is not correct. (C) s1 is not correct and s2 is correct. (D) Both s1 and s2 are not correct.

Description : The statements s1 and s2 are given as: s1: Context sensitive languages are closed under intersection, concatenation, substitution and inverse homomorphism. s2: Context free languages are closed under complementation, ... is not correct and s2 is correct. (D) Both s1 and s2 are not correct.

Last Answer : (B) s1 is correct and s2 is not correct.

Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue may be complex structures that are ordered on one or several fields. Which of the following is correct? (A) Both S1 and S2 are incorrect. (B) S1 is correct and S2 is incorrect. (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Description : Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue ... . (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Last Answer : (D) Both S1 and S2 are correct.