a rapid gravity filter (A) Raw water from the source is supplied (B) Disinfected raw water is supplied (C) Raw water passed through coagulation tank is supplied (D) None of these

a rapid gravity filter 

(A) Raw water from the source is supplied 

(B) Disinfected raw water is supplied 

(C) Raw water passed through coagulation tank is supplied 

(D) None of these

by

1 Answer

Answer :

(C) Raw water passed through coagulation tank is supplied 

by

Related questions

Distribution of wash water is provided in (A) Sedimentation tank (B) Slow sand filter (C) Rapid gravity filter (D) All the above

Description : Distribution of wash water is provided in  (A) Sedimentation tank  (B) Slow sand filter  (C) Rapid gravity filter  (D) All the above 

Last Answer : (C) Rapid gravity filter

Rapid sand filter (A) Should be preceded by coagulation and sedimentation (B) Uses rapid sand as filter media(C) Is used after slow sand filtering has been done (D) Can combine disinfection also

Description : Rapid sand filter (A) Should be preceded by coagulation and sedimentation (B) Uses rapid sand as filter media (C) Is used after slow sand filtering has been done (D) Can combine disinfection also

Last Answer : (A) Should be preceded by coagulation and sedimentation

A high velocity of wash water is required for (A) Rapid gravity filter with strainers (B) Rapid gravity filter without strainers (C) Slow sand filter with strainers (D) Slow sand filter without strainers

Description : A high velocity of wash water is required for (A) Rapid gravity filter with strainers (B) Rapid gravity filter without strainers (C) Slow sand filter with strainers (D) Slow sand filter without strainers

Last Answer : (B) Rapid gravity filter without strainers

Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Description : Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Last Answer : (D) 35 to 40 gm/litre

The yield of a rapid gravity filter as compared to that of slow sand filter, is (A) 10 times (B) 15 times (C) 20 times (D) 30 times

Description : The yield of a rapid gravity filter as compared to that of slow sand filter, is (A) 10 times (B) 15 times (C) 20 times (D) 30 times

Last Answer : (D) 30 times

Which of the following operational problems relate to the functioning of rapid gravity filter ? 1. Inadequate media comprising filter bed 2. Sludge bulking 3. Mud balls 4. Negative head 5. Incrustation of media (a) 1, 3, 4 and 5 only (b) 1, 2, 3 and 4 only (c) 2, 3, 4 and 5 only (d) 1, 2, 3, 4 and 5

Description : Which of the following operational problems relate to the functioning of rapid gravity filter ? 1. Inadequate media comprising filter bed 2. Sludge bulking 3. Mud balls 4. Negative head 5. Incrustation of media (a) 1, 3, 4 and 5 ... 2, 3 and 4 only (c) 2, 3, 4 and 5 only (d) 1, 2, 3, 4 and 5

Last Answer : (a) 1, 3, 4 and 5 only

Pick up the incorrect statement from the following: (A) Water disinfected with ozone is free from any odour (B) Ozone removes bacterias as well as colour and odour (C) Ozonized water becomes tasteless (D) None of these

Description : Pick up the incorrect statement from the following: (A) Water disinfected with ozone is free from any odour (B) Ozone removes bacterias as well as colour and odour (C) Ozonized water becomes tasteless (D) None of these

Last Answer : (C) Ozonized water becomes tasteless

When gravity and pumping systems of water distribution are adopted, the type of distribution reservoir, is (A) Elevated tank (B) Ground source reservoir (C) Intz tank (D) Stand pipe

Description : When gravity and pumping systems of water distribution are adopted, the type of distribution  reservoir, is  (A) Elevated tank  (B) Ground source reservoir  (C) Intz tank  (D) Stand pipe

Last Answer : (A) Elevated tank 

In a rapid sand filter, air binding is caused due to excessive (A) Negative pressure (B) Pressure (C) Turbidity (D) Water pressure

Description : In a rapid sand filter, air binding is caused due to excessive  (A) Negative pressure  (B) Pressure  (C) Turbidity  (D) Water pressure

Last Answer : (A) Negative pressure

Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly distribute the backwash water 5. To prevent algae growth Which of the following statements are correct ? a) 1, 2, 3, 4 and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Description : Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly ... and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Last Answer : b) 2, 3 and 4 only

The purpose of a surge tank is (A) To control the pressure variations due to rapid changes in the pipe line flow (B) To eliminate water hammer possibilities (C) To regulate flow of water to turbines by providing necessary retarding head of water (D) All of the above

Description : The purpose of a surge tank is (A) To control the pressure variations due to rapid changes in the pipe line flow (B) To eliminate water hammer possibilities (C) To regulate flow of water to turbines by providing necessary retarding head of water (D) All of the above

Last Answer : Answer: Option D

How is milk disinfected ?

Description : How is milk disinfected ?

Last Answer : Milk is disinfected through pasteurization.

Explant is required to be disinfected before placing in culture. This is done by

Description : Explant is required to be disinfected before placing in culture. This is done by

Last Answer : Explant is required to be disinfected before placing in culture. This is done by A. autoclaving B. ... rays C. clorax or-hypochlorite D. X-rays

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper

The maximum permitted loss of head in a rapid sand filter, is (A) 1 m (B) 2 m (C) 3 m (D) 4 m

Description : The maximum permitted loss of head in a rapid sand filter, is (A) 1 m (B) 2 m (C) 3 m (D) 4 m

Last Answer : (C) 3 m

Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream?(A) Sedimentation tank(B) Circular clarifier(C) Mechanical flocculation(D) Chemical coagulation

Description : Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream? (A) Sedimentation tank (B) Circular clarifier (C) Mechanical flocculation (D) Chemical coagulation

Last Answer : (D) Chemical coagulation

Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Description : Slow sand filter is used if maximum turbidity of raw water is less than (A) 10 gm/litre (B) 20 gm/litre (C) 30 gm/litre (D) 50 gm/litre

Last Answer : (D) 50 gm/litre

Efficiency of removing bacterias from raw water by a slow sand filter, is (A) 80% to 81% (B) 85% to 86% (C) 90% to 97% (D) 98% to 99%

Description : Efficiency of removing bacterias from raw water by a slow sand filter, is (A) 80% to 81% (B) 85% to 86% (C) 90% to 97% (D) 98% to 99%

Last Answer : (D) 98% to 99%

Rapid gravity filters can remove bacterial impurities up to a maximum of (A) 50 % (B) 60 % (C) 70 % (D) 80 %

Description : Rapid gravity filters can remove bacterial impurities up to a maximum of  (A) 50 %  (B) 60 %  (C) 70 %  (D) 80 %

Last Answer : (D) 80 %

Rapid gravity filters (A) Were developed by G.W. Fuller (B) Make use of coarser sand with effective size as 0.5 mm (C) Yield as high as 30 times the yield of slow sand filters (D) All the above

Description : Rapid gravity filters  (A) Were developed by G.W. Fuller  (B) Make use of coarser sand with effective size as 0.5 mm  (C) Yield as high as 30 times the yield of slow sand filters  (D) All the above 

Last Answer : (D) All the above 

When the reduced level of the water source is higher than the reduced level of the consumer's place, water is generally supplied (A) By pumping system (B) By gravitational system (C) Both (a) and (b) (D) All the above

Description : When the reduced level of the water source is higher than the reduced level of the consumer's  place, water is generally supplied  (A) By pumping system  (B) By gravitational system  (C) Both (a) and (b)  (D) All the above 

Last Answer : (B) By gravitational system 

A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter liquid of specific gravity 0.75 to a depth of 2 m. The resultant pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Description : A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter ... pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Last Answer : Correct Answer is 15000 kg

A liquid is found to scatter a beam of light but leaves no residue when passed through the filter paper. What can the liquid be described as ?

Description : A liquid is found to scatter a beam of light but leaves no residue when passed through the filter paper. What can the liquid be described as ?

Last Answer : Ans. Colloid. 

When a beam of ordinary white light is passed through a Polaroid plate filter, the intensity of the beam that emerges is: w) equal to that of the incident beam x) about 0.9 that of the incident beam y) about one-half that of the incident beam z) practically zero

Description : When a beam of ordinary white light is passed through a Polaroid plate filter, the intensity of the beam that emerges is: w) equal to that of the incident beam x) about 0.9 that of the incident beam y) about one-half that of the incident beam z) practically zero

Last Answer : ANSWER: Y -- ABOUT ONE-HALF THAT OF THE INCIDENT BEAM 

Power necessary to operate the horn relay shown in the illustration ____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through the relay's contacts D. also lights lamps 'R' and 'T'

Description : Power necessary to operate the horn relay shown in the illustration ____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through the relay's contacts D. also lights lamps 'R' and 'T'

Last Answer : Answer: A

Power necessary to operate the horn shown in the illustration _____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through a relay coil D. also lights lamps 'R' and 'T'

Description : Power necessary to operate the horn shown in the illustration _____________. EL-0093 A. comes from each station's magneto B. is supplied from a 115 volt source C. is conducted through a relay coil D. also lights lamps 'R' and 'T'

Last Answer : Answer: B

Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Description : Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Last Answer : (B) Boiling

Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Last Answer : (B) 3 to 6

Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Description : Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Last Answer : (C) Mud balls

In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : The CEMF of the inductor

In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : Counter electro-motive force of the inductor.

When sufficient energy through mechanical mixing is supplied to keep the entire contents, including the sewage solids, mixed and aerated, the reactor is termed : (a) An aerobic lagoon (b) An aerobic pond (c) A facultative lagoon (d) A facultative pond

Description : When sufficient energy through mechanical mixing is supplied to keep the entire contents, including the sewage solids, mixed and aerated, the reactor is termed : (a) An aerobic lagoon (b) An aerobic pond (c) A facultative lagoon (d) A facultative pond

Last Answer : (a) An aerobic lagoon

Chemical coagulation of drinking water, is done (A) To settle suspended materials (B) To increase rate of settlement of suspended materials (C) To remove the bacterias (D) None of these

Description : Chemical coagulation of drinking water, is done (A) To settle suspended materials (B) To increase rate of settlement of suspended materials (C) To remove the bacterias (D) None of these

Last Answer : (B) To increase rate of settlement of suspended materials

Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water is an important consideration for selecting a coagulant Which of the following statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water ... 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : a) 1, 2 and 3

If Organic sources of carcinogenic compounds in water persist even after chlorination, then what is the correct sequence among treatment processes listed below if all these are considered compulsory ? 1. Coagulation 2. Sedimentation 3. Filtration in general 4. Activated carbon bed filtration 5. Flocculation 6. Chlorination a) 4-5-3-2-6 and 1 b) 1-2-3-4-5 and 6 c) 4- 2- 3- 1- 5 and 6 d) 1-5-2-3-4 and 6

Description : If Organic sources of carcinogenic compounds in water persist even after chlorination, then what is the correct sequence among treatment processes listed below if all these are considered compulsory ? 1. Coagulation 2. Sedimentation 3. Filtration in ... c) 4- 2- 3- 1- 5 and 6 d) 1-5-2-3-4 and 6

Last Answer : d) 1-5-2-3-4 and 6

Aqueous solution of raw sugar, when passed over beds of animal charcoal, becomes colourless. Explain.

Description : Aqueous solution of raw sugar, when passed over beds of animal charcoal, becomes colourless. Explain.

Last Answer : Aqueous solution of raw sugar, when passed over beds of animal charcoal, becomes colourless. Explain.

Dissolved carbon dioxide, can be removed from the supply main by (A) Sedimentation (B) Aeration (C) Chlorination (D) Coagulation

Description : Dissolved carbon dioxide, can be removed from the supply main by (A) Sedimentation (B) Aeration (C) Chlorination (D) Coagulation

Last Answer : (B) Aeration

How to get passed by the M86 web filter?

Description : How to get passed by the M86 web filter?

Last Answer : It is not likely, the filter is part of the suite for networking. It’s like how do it break out of Leavenworth prison?

An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Description : An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Last Answer : (D) Σ wi . Σ xi

Fatty acids are a major energy source for the body. Which of the following statement(s) is/are true concerning the use of fatty acids as an energy source? a. Fatty acids are stored in adipocytes as triglycerides b. Hormone-sensitive lipase is present only in adipose tissue c. Fatty acids are released into the circulation traveling freely in plasma d. Approximately 25% of total nonprotein caloric needs supplied via total parenteral nutrition should be in the form of fat

Description : Fatty acids are a major energy source for the body. Which of the following statement(s) is/are true concerning the use of fatty acids as an energy source? a. Fatty acids are stored in ... 25% of total nonprotein caloric needs supplied via total parenteral nutrition should be in the form of fat

Last Answer : Answer: a, b, d In most tissues, fatty acids are readily oxidized for energy. They are especially important energy sources for the heart, liver and skeletal muscle. In ... administered to patients receiving total parenteral nutrition should comprise about 5-30% of total nonprotein caloric needs

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

What is the voltage and the frequency of the A.C source supplied to our homes and industries?

Description : What is the voltage and the frequency of the A.C source supplied to our homes and industries?

Last Answer : The voltage range of domestic AC is 230 to 250 volts. The frequency of A.C source is 50 Hz or 50 cycles per second.

By whom address of external function in the assembly source file supplied by __ when activated: a. Assembler b. Linker c. Machine d. Code

Description : By whom address of external function in the assembly source file supplied by __ when activated: a. Assembler b. Linker c. Machine d. Code

Last Answer : b. Linker

Power for the electronic digital multimeter is normally supplied by what internal power source?

Description : Power for the electronic digital multimeter is normally supplied by what internal power source?

Last Answer : Rechargeable batteries.

A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

How much current does a 1500 Watt heater draw if supplied with a 120 Volt source?

Description : How much current does a 1500 Watt heater draw if supplied with a 120 Volt source?

Last Answer : ANSWER: 12.5 AMPS

A 4-pole induction motor, supplied by a slightly unbalanced three-phase 50 Hz source, is rotating at 1440

Description : A 4-pole induction motor, supplied by a slightly unbalanced three-phase 50 Hz source, is rotating at 1440 rpm. The electrical frequency in Hz of the induced negative sequence current in the rotor is  (A) 100 (B) 98 (C) 52 (D) 48

Last Answer : A 4-pole induction motor, supplied by a slightly unbalanced three-phase 50 Hz source, is rotating at 1440 rpm. The electrical frequency in Hz of the induced negative sequence current in the rotor is 98 

An emf of 120 V causes a current of 3A to flow in a circuit how much energy is supplied by the source in..

Description : An emf of 120 V causes a current of 3A to flow in a circuit how much energy is supplied by the source in 12 seconds. A. 4130 J B. 4310 J C. 4320 J D. None of these 

Last Answer : An emf of 120 V causes a current of 3A to flow in a circuit how much energy is supplied by the source in 12 seconds.   4320 J

If the energy is supplied from a source, whose resistance is 1 ohm, to a load of 100 ohms the source will be?

Description : If the energy is supplied from a source, whose resistance is 1 ohm, to a load of 100 ohms the source will be?

Last Answer : If the energy is supplied from a source, whose resistance is 1 ohm, to a load of 100 ohms the source will be a voltage source.

The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

Description : The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

Last Answer : Ns         equals        f/pair pole 50/4      - 12.5