The standard B.O.D. at 20°C, is taken for the consumption in
(A) 2 days
(B) 3 days
(C) 4 days
(D) 5 days
Description : 5 days-biochemical oxygen demand (BOD5) is taken at a temperature of A. 0°C B. 15°C C. 20°C D. 25°C
Last Answer : ANS: C
Description : If the depletion of oxygen is found to be 2.5 mg/litre after incubating 2.5 ml of sewage diluted to 250 ml for 5 days at 20°C, B.O.D. of the sewage is A. 50 mg/l B. 100 mg/l C. 150 mg/l D. 250 mg/l
Last Answer : ANS: D
Description : If 2% solution of a sewage sample is incubated for 5 days at 20°C and depletion of oxygen was found to be 5 ppm, B.O.D. of the sewage is A. 200 ppm B. 225 ppm C. 250 ppm D. None of these
Description : The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm ... DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg
Last Answer : (c) Tapwater at zero DO, 20°C and 760 mm Hg
Description : The standard B.O.D. of water is taken for A. 1 day B. 2 days C. 3 days D. 5 days
Description : An insulation resistance reading is taken at 20°C and found to be 10 megohms. What would you expect the resistance reading to be at 40°C? A. 2.5 megohms B. 10 megohms C. 15 megohms D. 20 megohms
Last Answer : Answer: A
Description : Standard air is the: a. Mass of 1 cubic meter of dry air at 20°C and atmospheric pressure b. Mass of a cubic meter of air at atmospheric conditions c. Volume of air at ambient temperature and atmospheric pressure ... pressure at sea level or 101.325 kPa e. Volume of 1 kg of air at 15°C and 100 kPa
Last Answer : Answer: D
Description : 3.0 ml of raw sewage is diluted to 300 ml. The D.O. concentration of the diluted sample at the beginning of the test was 8 mg/l. After 5 dayincubation at 20°C, the D.O. concentration was 5 mg/l. The BOD of raw sewerage is A. 100 mg/l B. 200 mg/l C. 300 mg/l D. 400 mg/l
Description : If a 2% solution of sewage sample is incubated for 5 days at 20°C and the dissolved oxygen depletion was found to be 8 mg/l. The BOD of the sewage is A. 100 mg/l B. 200 mg/l C. 300 mg/l D. 400 mg/l
Description : The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately (A) 5 mm (B) 10 mm (C) 20 mm (D) 30 mm
Last Answer : Answer: Option D
Description : The viscosity of water at 20°C is (A) One stoke (B) One centistoke (C) One poise (D) One centipoise
Description : The maximum hourly consumption, is generally taken as (A) 110 % (B) 120 % (C) 140 % (D) 150 %
Last Answer : (D) 150 %
Description : Onion seeds can germinate at a temperature of : a. 0-1°C b. 1-5°C c. 5-11°C d. 15-20°C
Last Answer : 1-5°C
Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C
Last Answer : (B) 10°C
Description : Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.
Last Answer : Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.
Description : Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C
Last Answer : Answer : D
Description : Fats are solids at (A) 10°C (B) 20°C (C) 30°C (D) 40°C
Last Answer : Answer : B
Description : The bacteria which are able to grow at 0°C but which grow at 20°C to 30°C, are known as a. Psychrophiles b. Facultative psychrophiles c. Average psychrophiles d. Mesophiles
Last Answer : Ans: C
Description : The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C
Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm
Last Answer : (A) 5°C and 1 kgf/cm
Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes
Last Answer : (B) Paraffins
Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7
Last Answer : (D) 18.7
Description : Prandtl number for water at 20°C is about (A) 7 (B) 70 (C) 0.7
Last Answer : (A) 7
Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s
Last Answer : (D) t = 800 s
Description : A Fahrenheit thermometer indicates a temperature of ‘ 14°F. its corresponding reading on the Celsius scale will be -----? A. – 2O°C B. – 10°C (Answer) C. + 10°C D. + 20°C
Last Answer : B. – 10°C (Answer)
Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50
Last Answer : (A) 32
Description : Date growth does not cease if temperature does not fall below: a. 0°C. b. 10°C c. 18°C d. 20°C
Last Answer : 18°C
Description : Optimum temperature for cool season vegetables is: a. 25-30°C b. 25-27°C c. 18-24°C d. 15-20°C
Last Answer : 18-24°C
Description : Germination of undeveloped seeds is favored by: a. Warm temperature (>20°C) b. Gibberallic acid c. Low temperature (
Last Answer : a & b
Description : The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C
Last Answer : 1) 20°C – 25°C
Description : Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C
Last Answer : 3) 50°C – 60°C
Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C
Last Answer : 0°C to 10°C
Description : A microbe that is a microaerophilic mesophile would grow optimally at and a. high 02; 30°C b. low 02; 20°C c. no 02; 30°C d. low 02; 37°C
Last Answer : d. low 02; 37°C
Description : Normal temperature and pressure (N.T.P.) corresponds to (A) 0°C and 760 mm Hg (B) 15°C and 760 mm Hg (C) 20°C and 760 mm Hg (D) 0°C and 1 kgf/cm2
Last Answer : (C) 20°C and 760 mm Hg
Description : If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be (a) 80°C (b) 0°C (c) 40°C (d) 20°C (e) 60°C.
Last Answer : Answer : b
Description : As per Indian Standard Specifications, the peak discharge for domestic purposes per capita per minute, is taken (A) 1.80 litres for 5 to 10 users (B) 1.20 litres for 15 users (C) 1.35 for 20 users (D) All the above
Last Answer : (D) All the above
Description : The observed N- value from a standard penetration test conducted in saturated sandy strata is 30; the N- value corrected for dilatancy may be taken as : (b) 15 (a) 20 (c) 23 (d) 39
Last Answer : (c) 23
Description : A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T, Reference year (2015-16 ) Energy consumption - 27,200 MWh.
Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF = 27,200 x 0.846= 23011MWh
Description : If the expected time for completion of a project is 10 days with a standard deviation of 2 days, the expected time of completion of the project with 99.9% probability is (A) 4 days (B) 6 days (C) 10 days (D) 16 day
Last Answer : (D) 16 days
Description : ____ energy consumption to an appropriate standard or benchmark. a] Setting target c] Comparing. b] Reporting d] Allocating
Last Answer : comparing
Description : The label which allows consumer to compare the energy consumption of similar products and factor lifetime running cost into their purchasing decisions. A. Comparative label. B. Endorsement label. C) Standard label. D) None of the above.
Last Answer : comparative label
Description : is a statistical technique which determines and quantifies the relationship between variables and enables standard equations to be established for energy consumption. a) linear regression analysis b) time-dependent energy analysis c) moving annual total d) CUSUM
Last Answer : a) linear regression analysis
Description : Which of the following statement(s) is/are true concerning oxygen consumption (O2)? a. O2 is normally 100-120 cc2/m2/min b. Resting O2 is controlled by the level of thyroid and catecholamine ... of oxygen taken up by the pulmonary capillaries d. O2 is dependent on the status of pulmonary function
Last Answer : Answer: a, b Oxygen consumed in the process of metabolism is expressed as the volume of oxygen per minute (O2). O2 is normally 100-120 cc2/m2/min, or 200 cc/min for a typical adult. ... , so we measure O2 across the lung and assume that it is exactly the amount consumed in the systemic metabolism
Description : Which of the following statements about delivery-dependent oxygen consumption are true? A. Below the critical oxygen delivery (D(overdot)O 2crit), one would expect to see a decrease in the ... oxygen extraction ratio remains constant as long as oxygen delivery remains above D(overdot)O 2crit.
Last Answer : Answer: BC DISCUSSION: Oxygen consumption is said to be delivery dependent below a critical point, D(overdot)O 2crit, at which anaerobic metabolism supervenes. Above this point, oxygen ... the therapeutic benefit of trying to achieve supranormal oxygen delivery has not been firmly established
Description : The formation of frost on cooling coils in a refrigerator (a) increases heat transfer (b) improves C.O.P. of the system (c) increases power consumption (d) reduces power consumption
Last Answer : Ans: c
Description : Calculate Re-order level from the following: Consumption per week: 100-200 units Delivery period: 14-28 days (a) 5600 units (b) 800 units (c) 1400 units (d) 200 units
Last Answer : (b) 800 units
Description : Goods not belonging to 100% EOU, EHTP, STP can be stored up to _____ days before being cleared for home consumption without attracting any interest. A 90 B 80 C 70 D 20
Last Answer : Ans :90
Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The heat treatment cycle is as follows; Increase temperature from 30 OC to 850 OC in 3 hours. ... efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50
Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30) = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8
Description : The ratio of maximum hourly consumption and average hourly consumption of the maximum day, is (A) 1.2 (B) 1.5 (C) 1.8 (D) 2.7
Last Answer : (D) 2.7
Description : Estimates of a water supply project depends upon the rate of water supply per capita consumption and probable population estimated at the end of the design period of (A) 5 to 10 years (B) 10 to 15 years (C) 15 to 20 years (D) 20 to 30 years
Last Answer : (D) 20 to 30 years