The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

The electric power generation cost in nuclear power plant is less than
that in a coal based thermal power plant, mainly because the
(A) Fuel cost per unit power generated is less
(B) Thermal efficiency of the former is higher
(C) Maintenance cost of the former is less
(D) None of these
by

1 Answer

Answer :

(A) Fuel cost per unit power generated is less
by

Related questions

Nuclear fuel generally used in reactors is uranium oxide instead of uranium, because the former has higher (A) Melting point, hence can be subjected to higher temperature (B) Density; hence core volume for a given power output would be smaller (C) Resistance to effects of irradiation (D) All (A), (B) and (C)

Description : Nuclear fuel generally used in reactors is uranium oxide instead of uranium, because the former has higher (A) Melting point, hence can be subjected to higher temperature (B) Density; hence core volume for a given ... be smaller (C) Resistance to effects of irradiation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Description : A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Last Answer : (A) Uses slower neutrons for fission

In which of the electric power generation system, the operating cost is minimum? (A) Thermal (B) Nuclear (C) Hydroelectric (D) Fast breeder reactor

Description : In which of the electric power generation system, the operating cost is minimum? (A) Thermal (B) Nuclear (C) Hydroelectric (D) Fast breeder reactor

Last Answer : (C) Hydroelectric

Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons

Description : Heat is generated in a nuclear reactor (thermal) by (A) Combustion of a nuclear fuel e.g. uranium (B) Fusion of atoms of uranium (C) Absorption of neutrons in uranium atoms (D) Fission of U-235 by neutrons

Last Answer : (D) Fission of U-235 by neutrons

Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Description : Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Last Answer : (A) It cannot burn low grade coal

What are the differences between a coal based thermal plant and a nuclear power plant?

Description : What are the differences between a coal based thermal plant and a nuclear power plant?

Last Answer : Coal  based  power  plant  uses  burnt  coal  to  produce  heat  energy  to  heat  up  water  to  run  turbines  while  nuclear  power  plant  uses  heat energy  produced   from  nuclei  undergoing  fussion  or  fission  to  heat  water  to  run  the  turbines.

For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Description : For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Last Answer : Ans :d

Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Description : Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is scarce (C) It is difficult to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Description : Commercial power generation from fusion reactor is not yet possible, because (A) It is difficult to control nuclear fusion reaction (B) The fuel required (i.e., deuterium & tritium) is ... to initiate fusion reaction (D) Quantity of fuel required for initiating fusion reaction is prohibitively high

Last Answer : (A) It is difficult to control nuclear fusion reaction

iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Last Answer : ∙ Torque is a function of thermal efficiency

The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Description : The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Last Answer : (A) Evaporative capacity

Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have highest operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Description : Which power plant has minimum operating cost? a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Gas Turbine Power Plant Ans: A 42. Which of the following have ... a) Hydroelectric power plant b) Thermal power plant c) Nuclear power plant d) Solar electric power plant

Last Answer : Ans: B

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

Nuclear power generation capacity in India is (A) 3000 MW (B) 10000 MW (C) More than hydroelectric power generation capacity (D) More than thermal power generation capacity

Description : Nuclear power generation capacity in India is (A) 3000 MW (B) 10000 MW (C) More than hydroelectric power generation capacity (D) More than thermal power generation capacity

Last Answer : (A) 3000 MW

In Jaitapur, which one of the following power plants is being set up? [Haryana Gr Bank PO 2011] (1) Coal based (2) Hydro-electric (3) Gas based (4) Nuclear based (5) None of these

Description : In Jaitapur, which one of the following power plants is being set up? [Haryana Gr Bank PO 2011] (1) Coal based (2) Hydro-electric (3) Gas based (4) Nuclear based (5) None of these

Last Answer : Ans: (4) 40. In which one of the following States, Mangla, Bhagyam and Aishwarya oil fields are located? [Haryana Gr Bank PO 2011] (1) Assam (2) Gujarat (3) A.P. (4) Orissa (5) Rajasthan

Hyperbolic cooling towers used in a) Coal-fired power plant b) Nuclear plants c) Thermal power plant d) All of these

Description : Hyperbolic cooling towers used in a) Coal-fired power plant b) Nuclear plants c) Thermal power plant d) All of these

Last Answer : d) All of these

The cost of fuel transportation is maxmimun in........ A.Hydro-electric power plant B.Steam power plant C.Nuclear power plant D.90% - 95%

Description : The cost of fuel transportation is maxmimun in........ A.Hydro-electric power plant B.Steam power plant C.Nuclear power plant D.90% - 95%

Last Answer : Ans: B

Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Description : Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Last Answer : (B) Higher C/H ratio

The main industrial source of emission of hydrogen sulphide air pollutant is (A) Petroleum refineries (B) Coal based thermal power plants (C) Pulp and paper plant (D) Metallurgical roasting & smelting plant

Description : The main industrial source of emission of hydrogen sulphide air pollutant is (A) Petroleum refineries (B) Coal based thermal power plants (C) Pulp and paper plant (D) Metallurgical roasting & smelting plant

Last Answer : (B) Coal based thermal power plants

Consider the following statements: 2. In India, the maximum part of electric energy is generated by the hydroelectric plants. 3. In India, the maximum part of electric energy is generated by the thermal power plants. 4. Neyveli Lignite Corporation Ltd. is located in Tamil Nadu. Which of these statements is/are correct? [CPO AC 2003] (a) 2 and 3 (b) 1 and 3 (c) 2 only (d) 3 only

Description : Consider the following statements: 2. In India, the maximum part of electric energy is generated by the hydroelectric plants. 3. In India, the maximum part of electric energy is generated by the thermal power plants. 4. Neyveli Lignite ... CPO AC 2003] (a) 2 and 3 (b) 1 and 3 (c) 2 only (d) 3 only

Last Answer : Ans: (a)

Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Description : Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Last Answer : (C) Too much air for combustion

Thermal electricity is generated by using which of these? (1) Coal only (2) Coal and Natural Gas only (3) Coal, Natural Gas and Petroleum (4) None of these

Description : Thermal electricity is generated by using which of these? (1) Coal only (2) Coal and Natural Gas only (3) Coal, Natural Gas and Petroleum (4) None of these

Last Answer : (3) Coal, Natural Gas and Petroleum Explanation: A thermal power station is a power plant in which heat energy is converted to electric power. Thermal power is producing using fossil fuel such as coal, natural gas or petroleum.

Thermal electricity is generated by using which of these? (1) Coal only (2) Coal and Natural Gas only (3) Coal, Natural Gas and Petroleum (4) None of these

Description : Thermal electricity is generated by using which of these? (1) Coal only (2) Coal and Natural Gas only (3) Coal, Natural Gas and Petroleum (4) None of these

Last Answer : (3) Coal, Natural Gas and Petroleum Explanation: A thermal power station is a power plant in which heat energy is converted to electric power. Thermal power is producing using fossil fuel such ... from thermal power plants, with about 85% of the country's thermal power generation being coal-based.

Thermal electricity is generated by using which of these ? (1) Coal only (2) Coal and Natural Gas only (3) Coal, Natural Gas and Petroleum (4) None of these

Description : Thermal electricity is generated by using which of these ? (1) Coal only (2) Coal and Natural Gas only (3) Coal, Natural Gas and Petroleum (4) None of these

Last Answer : Coal, Natural Gas and Petroleum

Which kind of power accounts for the largest share of power generation in India? (1) hydro-electricity (2) thermal (3) nuclear (4) solar

Description : Which kind of power accounts for the largest share of power generation in India? (1) hydro-electricity (2) thermal (3) nuclear (4) solar

Last Answer : (2) thermal Explanation: Thermal power is the largest source of power in India. There are different types of Thermal power plants based on the fuel used to generate the steam such ... and several other state level power generating companies are engaged in operating coal based Thermal Power Plants.

Nickel-cadmium batteries are superior to lead-acid batteries at high discharge rates because they _______________. A. deliver a large amount of power and can be recharged in a shorter time B. need fewer cells in connected series and less mounting space C. have higher output voltages and require no maintenance D. all of the above

Description : Nickel-cadmium batteries are superior to lead-acid batteries at high discharge rates because they _______________. A. deliver a large amount of power and can be recharged in a shorter time B. need ... less mounting space C. have higher output voltages and require no maintenance D. all of the above

Last Answer : Answer: A

What is the capacity of Rampal Coal Based Thermal Power Plant ?

Description : What is the capacity of Rampal Coal Based Thermal Power Plant ?

Last Answer : The capacity of Rampal Coal Based Thermal Power Plant is 1320 MW.

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Description : An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Last Answer : Ans :b

Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Description : Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Last Answer : ANSWER c. power output

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Tractors with less specific fuel consumption should be preferred because..... A. High efficiency C. Good output B. Good for field D. Less cost.

Description : Tractors with less specific fuel consumption should be preferred because..... A. High efficiency C. Good output B. Good for field D. Less cost

Last Answer : Less cost

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Which of the following quantities has the GREATEST influence on the overall efficiency of a conventional (Rankine cycle) electric generating station burning fossil fuels? w) steam temperature at the steam turbine inlet x) net heating value of the fuel y) steam pressure at the steam turbine inlet z) pounds of ash and sulfur per pound of fuel

Description : Which of the following quantities has the GREATEST influence on the overall efficiency of a conventional (Rankine cycle) electric generating station burning fossil fuels? w) steam temperature at the steam turbine ... pressure at the steam turbine inlet z) pounds of ash and sulfur per pound of fuel 

Last Answer : ANSWER: W -- STEAM TEMPERATURE AT THE STEAM TURBINE INLET 

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

Thorium is mainly used (A) For the manufacture of gas mantles (B) As a fissile fuel in a nuclear reactor (C) In the manufacture of hydrogen bomb (D) In the treatment of cancer

Description : Thorium is mainly used (A) For the manufacture of gas mantles (B) As a fissile fuel in a nuclear reactor (C) In the manufacture of hydrogen bomb (D) In the treatment of cancer

Last Answer : (A) For the manufacture of gas mantles

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Description : Thermal nuclear reactors using enriched uranium as fuel contains a maximum of __________ percent fissile material i.e. U-235. (A) 1 (B) 2 (C) 3 (D) 7

Last Answer : (C) 3

Spent fuel from the nuclear thermal reactor contains (A) Fission products (B) Plutonium (C) Unused fuel (D) All (A), (B) & (C

Description : Spent fuel from the nuclear thermal reactor contains (A) Fission products (B) Plutonium (C) Unused fuel (D) All (A), (B) & (C

Last Answer : (D) All (A), (B) & (C

Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Fuel for a nuclear reactor (thermal) is(A) Uranium(B) Plutonium(C) Radium(D) None of these

Description : Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Last Answer : (A) Uranium

Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Description : Zircaloy used as a fuel cladding material in a nuclear reactor (thermal) is an alloy of zirconium (A) Tin, nickel, iron and chromium (B) And graphite

Last Answer : (A) Tin, nickel, iron and chromium

Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Description : Fuel for a nuclear reactor (thermal) is (A) Uranium (B) Plutonium (C) Radium (D) None of these

Last Answer : (A) Uranium

________ terms are used to describe supercritical and ultra-supercritical coal generation by the coal industry. (a)High- efficiency and low -emissions (b)Low-efficiency and high- emissions (c) High-efficiency and high- emissions (d)Low-efficiency and low-emissions

Description : ________ terms are used to describe supercritical and ultra-supercritical coal generation by the coal industry. (a)High- efficiency and low -emissions (b)Low-efficiency and high- emissions (c) High-efficiency and high- emissions (d)Low-efficiency and low-emissions

Last Answer : (a)High- efficiency and low -emissions

Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year showing the cost at that time relative to a certain base year (C) Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Description : In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Last Answer : (D) Larger quantity of coal can be processed

In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Description : In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Last Answer : (D) Large quantity of coal can be processed

Electric power is less expensive at night because: w) more hydroelectric generation is brought on line at night. x) there is less demand at night. y) pollution control is less stringent at night. z) power plants are more efficient at night.

Description : Electric power is less expensive at night because: w) more hydroelectric generation is brought on line at night. x) there is less demand at night. y) pollution control is less stringent at night. z) power plants are more efficient at night.

Last Answer : ANSWER: X -- THERE IS LESS DEMAND AT NIGHT.