Description : Which of the following approaches to switching share networks resource? a. Circuit switching b. Packet switching c. Both A and B d. None of these
Last Answer : b. Packet switching
Description : Explain the two approaches of packet switching techniques.
Last Answer : _ Datagram approach _ Virtual circuit approach _ Switched virtual circuit(SVC) _ Permanent virtual circuit(PVC) _ Circuit – switched connection versus virtual – circuit connection _ Path versus route _ Dedicated versus shared
Description : Which type of switching is used in Internet? (1) Circuit (2) Telephone (3) Packet (4) Telex
Last Answer : Packet
Description : . Internet works on packet switching circuit switching both packet switching and circuit switching None of the Above
Last Answer : packet switching
Description : Which of the following statements is correct for the use of packet switching? A. the subdivision of information into individuallyaddressed packets in conjunction with alternativerouting arrangementenabled the transmission path ... capacity could be achieved. D. All of theabove E. None of the above
Last Answer : All of theabove
Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes
Last Answer : (4) 5 bytes
Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above
Last Answer : datagram switching
Description : Which one of the following statements is FALSE? a. Packet switching leads to better utilization of bandwidth resources than circuit switching. b. Packet switching results in less variation ... than circuit switching d. Packet switching can lead to reordering unlike in circuit switching
Last Answer : Packet switching results in less variation in delay than circuit switching.
Description : The required resources for communication between end systems are reserved for the duration of the session between end systems in ________ method. a) Packet switching b) Circuit switching c) Line switching d) Frequency switching
Last Answer : b) Circuit switching
Description : What is the difference between Circuit Switching and Packet Switching?
Last Answer : Ans-Circuit switching is the transmission technology that has been used since the first communication networks in the nineteenth century. In circuit switching, a caller must first establish a ... a flow into packets which are transmitted over a network without any resource being allocated.
Description : What are the advantages and disadvantages of packet switching over circuit switching?
Last Answer : The comparison of packet switching and circuit switching showing advantages and disadvantages of packet switching over circuit switching is given below:
Description : What is circuit switching and packet switching?
Last Answer : Circuit Switching is a strategy for switching data through a network. It involves establishing a dedicated path (circuit) between the source and destination. Packet Switching is also a ... the switch interconnects. It uses store and forward switching of discrete data units called packets.
Description : _____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique
Last Answer : a) Packet switching techniques
Description : Circuit switching has more advantage than packet switching for PCS. a) True b) False
Last Answer : b) False
Description : Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching
Last Answer : (D) Circuit Switching
Description : ____intercepts all messages entering and leaving the network. The _____effectively hides the true network addresses: a) Circuit Level Gateway b) Proxy Server c) Packet Filter d) None of These
Last Answer : b) Proxy Server
Description : A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switched c. None of the Given d. frame-switched
Last Answer : a. virtual-circuit
Description : How does packet switching work, exactly? (Especially over wireless?)
Last Answer : answer:If you are interested in the algorithms involved here are two common ones: http://en.wikipedia.org/wiki/Distance-vector_routing_protocol http://en.wikipedia.org/wiki/Link-state_protocol
Description : The taskof moving the packet from theinput queue to the output queuein a router is done by_________. A) input and output ports B) routing processor C) switching fabrics D) none of the above
Last Answer : switching fabrics
Description : Packet switching is used for (A) Credit card verification (B) Automated Teller Machine (C) The internet and the World Wide Web (D) All of the above
Last Answer : (D) All of the above
Description : The first type of firewall was the packet filter which looks at: a) network addresses b) Ports of the packet and determines if that packet should be allowed or blocked c) Both of above d) None of These
Last Answer : c) Both of above
Description : A packet filtering firewall operates at which of the following OSI layer? 1) At the Application layer 2) At the Transport Layer 3) At the Network Layer 4) Both 2 and 3
Last Answer : 4) Both 2 and 3
Description : A packet filtering firewall operates at which of the following OSI layer? 1 At the Application layer 2 At the Transport Layer 3 At the Network Layer 4 Both 2 and 3
Last Answer : 4 Both 2 and 3
Description : A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above
Last Answer : circuit-switched
Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above
Last Answer : virtual-circui
Description : In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address
Last Answer : b. a short VC number
Description : In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address
Last Answer : B. a short VC number
Description : BSNL land line telephone network is an example of a network. A. Packet switched B. Circuit switched C. Bit switched D. Line switched
Last Answer : B. Circuit switched
Description : A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched
Last Answer : b) Circuit switched
Description : A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched
Last Answer : b. Circuit switched
Description : The ________is a circuit-switched network, while the ______is a packet-switched network. (A) Telephone, ATM (B) SONET and FDDI (C) Satellite, Telephone (D) FDDI and SONET
Last Answer : (A) Telephone, ATM
Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport
Last Answer : physical
Description : A source code whose average word length approaches the fundamental limit set by the entropy of a discrete memoryless source. A. Prefix code B. Huffman code C. Entropy code D. Source code
Last Answer : B. Huffman code
Description : A token or small data packet is ______passed around the network: a) Intimately b) Continuously c) Twicely d) None of These
Last Answer : b) Continuously
Description : The ________is a network layer Internet protocol that provides message packets to report errors and other information regarding IP packet processing back to the source: a) Internet Control Message ... Standard Flexible Message Protocol c) Internet Dynamic Chartered Message Protocol d) None of These
Last Answer : a) Internet Control Message Protocol
Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec
Last Answer : A) IPsec
Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.
Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.
Description : Which command is used to test network connectivity and provide a response to each packet received by the remote host? a.test b.tracer c.ping d.connect
Last Answer : c.ping
Description : is another kind of fiber optic network with active star for switching. A) S/NET B) SW/NET C) NET/SW D) FS/NET
Last Answer : A) S/NET
Description : In _______delivery, both thedeliverer of the IP packet and the destination are on the same network. A) aconnectionless B) a direct C) an indirect D) none of the above
Last Answer : a direct
Description : You are paralleling two alternators. The synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates that the ____________. A. alternator ... be closed C. incoming alternator is running too slowly D. synchroscope is defective or broken
Last Answer : Answer: B
Description : You are attempting to parallel two AC generators and the synchroscope pointer is revolving slowly in the fast direction. You should _____________. A. use the governor control switch to adjust the incoming ... the 0° position D. use the field rheostat to adjust the speed of the incoming machine
Last Answer : Answer: C
Description : In........................mode, a common technique in packet-switched networks consists of wrapping a packet in a new one. A) Tunneling B) Encapsulation C) Both A and B D) None of the above
Last Answer : C) Both A and B
Description : What three things does a network packet contain?
Last Answer : What is the answer ?
Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode
Last Answer : D. Packet mode
Description : It is a protocol used to connect the other packet witching network A. X.25 B. X.50 C. X.10 D. X.75
Last Answer : D. X.75
Description : The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above
Last Answer : destination
Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : the IP address of therouter found inthe routing table
Description : Which of the following statement is incorrect? A. The Addresses Resolution Protocol, ARP, allows a host to find the physicaladdress ofa target host on the samephysical network, given only the target IP address. ... -addresses of our choice to every machine. D. All of theabove E. None of the above
Description : When you ping theloopback address,a packet is sent where? A. On the network B. Down through thelayers of the IP architecture and then up thelayers again C. Across the wire D. through the loopback dongle E. None of the above
Last Answer : Down through thelayers of the IP architecture and then up thelayers again