Naphthols are derivates of (A) Methyl amine (B) Naphthalene (C) Phenol (D) Xylene

Naphthols are derivates of
(A) Methyl amine
(B) Naphthalene
(C) Phenol
(D) Xylene
by

1 Answer

Answer :

(B) Naphthalene
by

Related questions

Which of the following would be most acidic? w) phenol x) methanol y) acetic acid z) methyl amine

Description : Which of the following would be most acidic? w) phenol x) methanol y) acetic acid z) methyl amine

Last Answer : ANSWER: C -- ACETIC ACID

Which of the following is NOT an aromatic hydrocarbon? w) naphthalene x) hexane y) styrene z) xylene

Description : Which of the following is NOT an aromatic hydrocarbon? w) naphthalene x) hexane y) styrene z) xylene

Last Answer : ANSWER: X -- HEXANE 

. Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Description : . Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Last Answer : (A) Benzene, toluene & xylene

Caprolactam, a raw material for the manufacture of nylon-6, isproduced from(A) Phenol(B) Naphthalene(C) Benzene(D) Pyridine

Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Synthetic glycerine is produced from (A) Toluene (B) Phenol (C) Propylene (D) Naphthalene

Description : Synthetic glycerine is produced from (A) Toluene (B) Phenol (C) Propylene (D) Naphthalene

Last Answer : (C) Propylene

Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene

Description : Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene

Last Answer : (C) Isopropanol

Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Description : Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Last Answer : (A) Styrene

Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Description : Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Last Answer : (C) Phthalic anhydride

Cetane number of alpha methyl naphthalene is assumed to be (A) 0 (B) 100 (C) 50 (D) ∞

Description : Cetane number of alpha methyl naphthalene is assumed to be (A) 0 (B) 100 (C) 50 (D) ∞

Last Answer : (A) 0

Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Description : Iso-octane is used as a reference substance in the definition of octane number and it is assigned an octane number value of 100. Iso-octane is chemically known as (A) α-methyl naphthalene (B) 2-2-4 tri methyl pentane (C) 1, 3 butadiene (D) Tetra methyl ethylene

Last Answer : (B) 2-2-4 tri methyl pentane

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Description : The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Last Answer : (B) Methyl ethyl ketone

A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Description : A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Last Answer : Answer: a Explanation: A fuel of cetane number 40 has the same ignition quality as a mixture of 40% cetane and 60% alpha methyl naphthalene as cetane number is counted on cetane percentage.

The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Description : The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Last Answer : Ans : d

Reference fuels for knock rating of SI engine fuels would include (a) Iso octane alpha methyl naphthalene (b) Normal octance and aniline (c) Isooctance and n octane (d) N heptane and iso octane

Description : Reference fuels for knock rating of SI engine fuels would include (a) Iso octane alpha methyl naphthalene (b) Normal octance and aniline (c) Isooctance and n octane (d) N heptane and iso octane

Last Answer : Ans : d

Which of the following is chief source of Naphthalene? (1) Moth balls (2) Moth flakes (3) Tar Camphor (4) Methyl Alcohol

Description : Which of the following is chief source of Naphthalene? (1) Moth balls (2) Moth flakes (3) Tar Camphor (4) Methyl Alcohol

Last Answer : (3) Methyl Alcohol Explanation: Petroleum-derived naphthalene is usually purer than that derived from coal tar.

Tetra hydroglolate can be freed from N5 methyl tetrahydrofolate only by (A) Nor epinephrine (B) Ethanol amine (C) Nicotinamide (D) Vitamin B12

Description : Tetra hydroglolate can be freed from N5 methyl tetrahydrofolate only by (A) Nor epinephrine (B) Ethanol amine (C) Nicotinamide (D) Vitamin B12

Last Answer : Answer : D

Pkb of aniline is more than that of methyl amine.

Description : Pkb of aniline is more than that of methyl amine.

Last Answer : In aniline, the lone pair of electrons on the N-atom are delocalized over the benzene ring. As a result electron density on the nitrogen decreases. In contrast in CH2NH2 , + I effect of CH3 ... , aniline is a weaker base than methylamine and hence its Pkb value is higher than that of methylamine.

Carbylamine test involves heating a mixture of (a) alcoholic KOH, methyl iodide, and sodium metal (b) alcoholic KOH, methyl iodide, and primary amine (c) alcoholic KOH, chloroform, and primary amine (d) alcoholic KOH, methyl alcohol, and primary amine

Description : Carbylamine test involves heating a mixture of (a) alcoholic KOH, methyl iodide, and sodium metal (b) alcoholic KOH, methyl iodide, and primary amine (c) alcoholic KOH, chloroform, and primary amine (d) alcoholic KOH, methyl alcohol, and primary amine

Last Answer : alcoholic KOH, chloroform, and primary amine

Based on the intermolecular forces involved, which of the following molecules will have the lowest boiling point? w) ethane x) methyl alcohol y) methyl amine z) methyl fluoride

Description : Based on the intermolecular forces involved, which of the following molecules will have the lowest boiling point? w) ethane x) methyl alcohol y) methyl amine z) methyl fluoride

Last Answer : ANSWER: W -- ethane

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Last Answer : (A) Formaldehyde

Phenol reacts with methyl chloroformate in the presence of `NaOH` to form product A. A reacts with `Br_(2)` to form product B. A and B are respectivel

Description : Phenol reacts with methyl chloroformate in the presence of `NaOH` to form product A. A reacts with `Br_(2)` to form product B. A and B are respectivel

Last Answer : Phenol reacts with methyl chloroformate in the presence of `NaOH` to form product A. A reacts with `Br_(2)` ... A and B are respectively A. B. C. D.

Which one of the following can be oxidized to the corresponding carbonyl compound - (1) O-Nitrophenol (2) Phenol (3) 2-methyl-2-hydroxy propane (4) 2-hydroxy propane

Description : Which one of the following can be oxidized to the corresponding carbonyl compound - (1) O-Nitrophenol (2) Phenol (3) 2-methyl-2-hydroxy propane (4) 2-hydroxy propane

Last Answer : (4) 2-hydroxy propane

Which of the following is used to denature ethanol? (1) Methyl alcohol (2) Propyl alcohol (3) Phenol (4) Methane

Description : Which of the following is used to denature ethanol? (1) Methyl alcohol (2) Propyl alcohol (3) Phenol (4) Methane

Last Answer : (1) Methyl alcohol Explanation: Denatured alcohol is ethanol that has additives to make it undrinkable (poisonous), to discourage recreational consumption. Different additives are used to make it difficult. to ... both because its boiling point is close to that of ethanol and because it is toxic.

Aspirin is produced by heating salicylic acid with (a) acetic anhydride in the presence of phosphoric acid (b) benzoic anhydride in the presence of phosphoric acid (c) methyl alcohol in the presence of sulfuric acid (d) phenol in the presence of sulfuric acid

Description : Aspirin is produced by heating salicylic acid with (a) acetic anhydride in the presence of phosphoric acid (b) benzoic anhydride in the presence of phosphoric acid (c) methyl alcohol in the presence of sulfuric acid (d) phenol in the presence of sulfuric acid

Last Answer : acetic anhydride in the presence of phosphoric acid

Which of the following is used to denature ethanol ? (1) Methyl alcohol (2) Propyl alcohol (3) Phenol (4) Methane

Description : Which of the following is used to denature ethanol ? (1) Methyl alcohol (2) Propyl alcohol (3) Phenol (4) Methane

Last Answer : Methyl alcohol

Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Description : Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Last Answer : (A) A solution of benzene, toluene and o-xylene

A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits an azeotrope at 101.3 kPa (B) The composition of the mixture, in percent by volume is: o-xylene 30, p￾xylene 60. and m-xylene 10 (C) The composition of the mixture in mole percent is: o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Description : A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits ... : o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Last Answer : (A) The mixture exhibits an azeotrope at 101.3 kPa

Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Description : Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Last Answer : (B) Potassium cyanide

The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Description : The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Last Answer : (A) Jacketed liquid phase CSTR

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Description : The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Last Answer : (D) Benzene-toluene-xylene

Toluene and xylene poisoning?

Description : Toluene and xylene poisoning?

Last Answer : DefinitionToluene and xylene are powerful compounds that are found in many household and industrial substances. Toluene and xylene poisoning can occur when someone ... /adhesivesLacquersOctane booster in gasolinePaintsPaint thinnersPrinting and leather tanning processesRubber and plastic cement

(1) the action of ultraviolet rays on oxygen Explanation: The majority of tropospheric ozone formation occurs when nitrogen oxides (NOx), carbon monoxide (CO ) and volatile organic compounds (VOCs), such as xylene, react in the atmosphere in the presence of sunlight containing ultra violet rays. NOx, CO, and VOCs are called ozone precursors. CO + 2O2 + CO2 + O3

Description : (1) the action of ultraviolet rays on oxygen Explanation: The majority of tropospheric ozone formation occurs when nitrogen oxides (NOx), carbon monoxide (CO ) and volatile organic compounds (VOCs), such as xylene, ... violet rays. NOx, CO, and VOCs are called ozone precursors. CO + 2O2 + CO2 + O3

Last Answer : Water is not effective in extinguishing a fire caused by petrol because - (1) the flame is too hot for water to cool it down (2) water and petrol react chemically (3) water and petrol are ... (4) water and petrol are immiscible with each other and petrol which forms the upper layer continues to burn

Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Description : Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Last Answer : Benzene

Cresols on distillation with zinc dust gives (a) o-Xylene(b) Benzene(c) o- plus p-Xylene(d) Toluene

Description : Cresols on distillation with zinc dust gives (a) o-Xylene (b) Benzene (c) o- plus p-Xylene (d) Toluene

Last Answer : Toluene

Which of the following can be made by the action of CH3Cl on benzene in the presence of aluminium chloride? (a) Ethylbenzene (b) o-Xylene (c) Chlorobenzene (d) m-Xylene

Description : Which of the following can be made by the action of CH3Cl on benzene in the presence of aluminium chloride? (a) Ethylbenzene (b) o-Xylene (c) Chlorobenzene (d) m-Xylene

Last Answer : o-Xylene

When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene(b) Toluene(c) m-Xylene(d) Mesitylene

Description : When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) m-Xylene (d) Mesitylene

Last Answer : Mesitylene

When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Description : When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Last Answer : Benzene

Starting material for the production of butadiene in India is (A) Naphthalene (B) Benzol (C) Ethyl alcohol (D) Phthalic anhydride

Description : Starting material for the production of butadiene in India is (A) Naphthalene (B) Benzol (C) Ethyl alcohol (D) Phthalic anhydride

Last Answer : (C) Ethyl alcohol

Which of the following is not a by-product recovered in a high temperature coal carbonisation plant? (A) Benzol (B) Pitch-creosote mixture (PCM) (C) Naphthalene (D) Ethylene

Description : Which of the following is not a by-product recovered in a high temperature coal carbonisation plant? (A) Benzol (B) Pitch-creosote mixture (PCM) (C) Naphthalene (D) Ethylene

Last Answer : (D) Ethylene

Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres(B) As moth balls (insecticides)(C) As a fuel in furnaces(D) For making electrodes

Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes

Last Answer : (C) As a fuel in furnaces

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Naphthalene is removed from coke oven gas by (A) Scrubbing with wash oil (a petroleum product) (B) Adsorbing on bog iron bed (C) Absorbing in vetro-coke solution (D) None of these

Description : Naphthalene is removed from coke oven gas by (A) Scrubbing with wash oil (a petroleum product) (B) Adsorbing on bog iron bed (C) Absorbing in vetro-coke solution (D) None of these

Last Answer : (A) Scrubbing with wash oil (a petroleum product)

Naphthalene is used for making (A) Insecticides (e.g. moth balls) (B) Unsaturated polyesters (C) Drug intermediates e.g. β-naphthol (D) All (A), (B) and (C)

Description : Naphthalene is used for making (A) Insecticides (e.g. moth balls) (B) Unsaturated polyesters (C) Drug intermediates e.g. β-naphthol (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Glycerine can be obtained from (A) Fat (B) Naphthalene (C) Cumene (D) Sucrose

Description : Glycerine can be obtained from (A) Fat (B) Naphthalene (C) Cumene (D) Sucrose

Last Answer : (A) Fat

Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Description : Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Last Answer : (A) Oxidation of naphthalene