Which of the following is NOT an aromatic hydrocarbon? w) naphthalene x) hexane y) styrene z) xylene

Which of the following is NOT an aromatic hydrocarbon? w) naphthalene x) hexane y) styrene z) xylene
by

1 Answer

Answer :

ANSWER: X -- HEXANE 
by

Related questions

Which of the following is an aromatic hydrocarbon? w) methane x) ethanol y) benzene z) glycine

Description : Which of the following is an aromatic hydrocarbon? w) methane x) ethanol y) benzene z) glycine

Last Answer : ANSWER: Y -- BENZENE 

Which of the following organic compounds is known as a saturated chain hydrocarbon ? w) an aromatic compound x) an alkene y) an alkyne z) an alkane

Description : Which of the following organic compounds is known as a saturated chain hydrocarbon ? w) an aromatic compound x) an alkene y) an alkyne z) an alkane

Last Answer : ANSWER: Z -- AN ALKANE

Which of the following chemical compounds is an important aromatic hydrocarbon. Is it: w) methane x) ethane y) benzene z) propyne

Description : Which of the following chemical compounds is an important aromatic hydrocarbon. Is it: w) methane x) ethane y) benzene z) propyne

Last Answer : ANSWER: Y -- BENZENE

Which of the following phrases is NOT appropriate for a description of benzene? w) characteristic reactivity of an alkene x) volatile liquid y) aromatic hydrocarbon z) resonance hybridization

Description : Which of the following phrases is NOT appropriate for a description of benzene? w) characteristic reactivity of an alkene x) volatile liquid y) aromatic hydrocarbon z) resonance hybridization

Last Answer : ANSWER: W -- CHARACTERISTIC REACTIVITY OF AN ALKENE

Naphthols are derivates of (A) Methyl amine (B) Naphthalene (C) Phenol (D) Xylene

Description : Naphthols are derivates of (A) Methyl amine (B) Naphthalene (C) Phenol (D) Xylene

Last Answer : (B) Naphthalene

How many carbon atoms are there in one naphthalene molecule? w) 6 x) 8 y) 10 z) 15

Description : How many carbon atoms are there in one naphthalene molecule? w) 6 x) 8 y) 10 z) 15

Last Answer : ANSWER: Y -- 10

Moth balls contain: w) formalin x) chitin (pron: kite-en) y) formaldehyde z) naphthalene

Description : Moth balls contain: w) formalin x) chitin (pron: kite-en) y) formaldehyde z) naphthalene

Last Answer : ANSWER: Z -- NAPHTHALENE

The hydrocarbon end of a detergent molecule is: w) hydrophilic x) hydrophobic y) possible ionic z) contains oxygen or sulfur

Description : The hydrocarbon end of a detergent molecule is: w) hydrophilic x) hydrophobic y) possible ionic z) contains oxygen or sulfur

Last Answer : ANSWER: HYDROPHOBIC

Which of the following is NOT an aliphatic hydrocarbon? w) n-octane x) propylene y) n-tridecane z) benzene

Description : Which of the following is NOT an aliphatic hydrocarbon? w) n-octane x) propylene y) n-tridecane z) benzene

Last Answer : ANSWER: Z -- BENZENE 

A family of organic compounds whose molecules will add water under an acid catalysis and change into alcohols are the: w) alkenes x) alkanes y) aromatic hydrocarbons z) cycloalkanes

Description : A family of organic compounds whose molecules will add water under an acid catalysis and change into alcohols are the: w) alkenes x) alkanes y) aromatic hydrocarbons z) cycloalkanes

Last Answer : ANSWER: W -- ALKENES

Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Description : Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Last Answer : (A) Styrene

Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Description : Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Last Answer : (C) Phthalic anhydride

What is Aromatic Hydrocarbon ?

Description : What is Aromatic Hydrocarbon ?

Last Answer : Hydrocarbons with benzene and benzene rings are called aromatic hydrocarbons. Such as: benzene , phenol.

‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Description : ‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Last Answer : (3) chlorofluoro hydrocarbon Explanation: In addition to fluorine and carbon, Freons often contain hydrogen, chlorine, or bromine. Thus, Freons are types of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and related compounds.

‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Description : ‘Freon' used as refrigerants is chemically known as - (1) chlorinated hydrocarbon (2) fluorinated hydrocarbon (3) chlorofluoro hydrocarbon (4) fluorinated aromatic compound

Last Answer : (3) chlorofluoro hydrocarbon Explanation: In addition to fluorine and carbon, Freons often contain hydrogen, chlorine, or bromine. Thus, Freons are types of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and related compounds.

Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Description : Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content

Last Answer : (B) Hydrocarbon content type (aromatic or paraffinic)

A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits an azeotrope at 101.3 kPa (B) The composition of the mixture, in percent by volume is: o-xylene 30, p￾xylene 60. and m-xylene 10 (C) The composition of the mixture in mole percent is: o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Description : A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits ... : o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Last Answer : (A) The mixture exhibits an azeotrope at 101.3 kPa

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

(1) the action of ultraviolet rays on oxygen Explanation: The majority of tropospheric ozone formation occurs when nitrogen oxides (NOx), carbon monoxide (CO ) and volatile organic compounds (VOCs), such as xylene, react in the atmosphere in the presence of sunlight containing ultra violet rays. NOx, CO, and VOCs are called ozone precursors. CO + 2O2 + CO2 + O3

Description : (1) the action of ultraviolet rays on oxygen Explanation: The majority of tropospheric ozone formation occurs when nitrogen oxides (NOx), carbon monoxide (CO ) and volatile organic compounds (VOCs), such as xylene, ... violet rays. NOx, CO, and VOCs are called ozone precursors. CO + 2O2 + CO2 + O3

Last Answer : Water is not effective in extinguishing a fire caused by petrol because - (1) the flame is too hot for water to cool it down (2) water and petrol react chemically (3) water and petrol are ... (4) water and petrol are immiscible with each other and petrol which forms the upper layer continues to burn

Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Description : Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Last Answer : Benzene

Cresols on distillation with zinc dust gives (a) o-Xylene(b) Benzene(c) o- plus p-Xylene(d) Toluene

Description : Cresols on distillation with zinc dust gives (a) o-Xylene (b) Benzene (c) o- plus p-Xylene (d) Toluene

Last Answer : Toluene

Which of the following can be made by the action of CH3Cl on benzene in the presence of aluminium chloride? (a) Ethylbenzene (b) o-Xylene (c) Chlorobenzene (d) m-Xylene

Description : Which of the following can be made by the action of CH3Cl on benzene in the presence of aluminium chloride? (a) Ethylbenzene (b) o-Xylene (c) Chlorobenzene (d) m-Xylene

Last Answer : o-Xylene

When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene(b) Toluene(c) m-Xylene(d) Mesitylene

Description : When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) m-Xylene (d) Mesitylene

Last Answer : Mesitylene

When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Description : When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Last Answer : Benzene

The compound that has the least value for octane number is – (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Description : The compound that has the least value for octane number is – (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Last Answer : (4) n-heptane Explanation: Octane rating or octane number is a standard measure of the performance of a motor or aviation fuel. The higher the octane number, the more compression the fuel can withstand. Isooctane (upper) has an octane rating of 100 whereas n-heptane has an octane rating of O.

Explain the effect of increasing the temperature of a liquid, on intermolecular forces operating between its particles. What will happen to the viscosity of a liquid if its temperature is increased? Arrange the following in increasing order of viscosity-water, hexane, glycerine.

Description : Explain the effect of increasing the temperature of a liquid, on intermolecular forces operating between its particles. What will happen to the viscosity of a liquid if its temperature is increased? Arrange the following in increasing order of viscosity-water, hexane, glycerine.

Last Answer : Ans. On increasing the temperature , the kinetic energy of liquid molecules increases so that it can overcome the attractive forces between the molecules and hence liquid can flow more easily i.e. viscosity decreases. Order of increasing viscosity : hexane < water < glycerine.

Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Description : Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Last Answer : Cyclohexane

Consider the three isomeric alkanes n-hexane, 2,3-dimethylbutane, and 2- methylpentane. Which of the following correctly lists these compounds in order of increasing boiling point? (a) 2,3-dimethylbutane < 2-methylpentane < n-hexane (b) 2-methylpentane < n-hexane < 2,3-dimethylbutane (c) 2-methylpentane < 2, 3-dimethylbutane < n-hexane (d) n-hexane < 2-methylpentane < 2,3-dimethylbutane

Description : Consider the three isomeric alkanes n-hexane, 2,3-dimethylbutane, and 2- methylpentane. Which of the following correctly lists these compounds in order of increasing boiling point? (a) 2,3-dimethylbutane < 2- ... < 2, 3-dimethylbutane < n-hexane (d) n-hexane < 2-methylpentane < 2,3-dimethylbutane

Last Answer : 2,3-dimethylbutane < 2-methylpentane < n-hexane

Which of the following compounds does not dissolve in concentrated H2SO4 on warming? (a) n-Hexane (b) Diethyl ether (c) 1-Butene (d) Aniline

Description : Which of the following compounds does not dissolve in concentrated H2SO4 on warming? (a) n-Hexane (b) Diethyl ether (c) 1-Butene (d) Aniline

Last Answer : n-Hexane

Which of the following alkanes will have the lowest boiling point? (a) n-Heptane (b) Isopentane (c) n-Hexane (d) Neopentane

Description : Which of the following alkanes will have the lowest boiling point? (a) n-Heptane (b) Isopentane (c) n-Hexane (d) Neopentane

Last Answer : Neopentane

How many isomers are possible for hexane? (a) 4 (b) 5 (c) 6 (d) 7

Description : How many isomers are possible for hexane? (a) 4 (b) 5 (c) 6 (d) 7

Last Answer : 5

The compound that has the least value for octane number is : (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Description : The compound that has the least value for octane number is : (1) 2-methyl heptane (2) Iso-octane (3) 2,2-dimethyl hexane (4) n-heptane

Last Answer : n-heptane

An aromatic amine (X) was treated with alcoholic potash and another compound (Y) when foul smelling gas was formed `C_(6)H_(5)NC`. The compound (Y) wa

Description : An aromatic amine (X) was treated with alcoholic potash and another compound (Y) when foul smelling gas was formed `C_(6)H_(5)NC`. The compound (Y) wa

Last Answer : An aromatic amine (X) was treated with alcoholic potash and another compound (Y) when foul smelling gas was formed `C_ ... 3)OH` D. `C_(6)H_(5)NH_(2)`

Toluene and xylene poisoning?

Description : Toluene and xylene poisoning?

Last Answer : DefinitionToluene and xylene are powerful compounds that are found in many household and industrial substances. Toluene and xylene poisoning can occur when someone ... /adhesivesLacquersOctane booster in gasolinePaintsPaint thinnersPrinting and leather tanning processesRubber and plastic cement

Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Description : Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Last Answer : (A) A solution of benzene, toluene and o-xylene

. Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Description : . Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Last Answer : (A) Benzene, toluene & xylene

Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Description : Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Last Answer : (B) Potassium cyanide

The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Description : The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Last Answer : (A) Jacketed liquid phase CSTR

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Description : The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Last Answer : (D) Benzene-toluene-xylene

Natural rubber is a polymer of – (1) Vinyl acetate (2) Propene (3) Isoprene (4) Styrene

Description : Natural rubber is a polymer of – (1) Vinyl acetate (2) Propene (3) Isoprene (4) Styrene

Last Answer : (3) Isoprene Explanation: Natural rubber consists of suitable polymers of the organic compound isoprene, with minor impurities of other organic compounds plus water. Isoprene is produced and emitted by ... trees into the atmosphere (major producers are oaks, poplars, eucalyptus, and some legumes).

Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Description : Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Last Answer : (1) Isoprene Explanation: Isoprene was first isolated by thermal decomposition of natural rubber. About 95% of isoprene production is used to produce cis-1,4- polyisoprene—a synthetic version of natural rubber.

PVC is formed by polymerization of - (1) Styrene (2) Acetylene (3) Propene (4) Vinyl Chloride

Description : PVC is formed by polymerization of - (1) Styrene (2) Acetylene (3) Propene (4) Vinyl Chloride

Last Answer : (4) Vinyl Chloride Explanation: Polyvinyl chloride is produced by polymerization of the vinyl chloride monomer (VCM). About 80% of production involves suspension polymerization.

The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : (4) Ethylene Explanation: Ethylene is a rather stable molecule that polymerizes only upon contact with catalysts. The conversion is highly exothermic, that is the process releases a lot of heat. ... is the most pervasive technology, which means that metal chlorides or metal oxides are used.

PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Description : PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene

Last Answer : (2) Vinyl chloride Explanation: Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride (17CM). Polyvinyl chloride, commonly abbreviated PVC, is the third-most widely produced ... it is cheaper and stronger than more traditional alternatives such as copper or ductile iron.

The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Last Answer : Styrene

Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Description : Natural rubber is the polymer of : (1) Isoprene (2) Styrene (3) Butadiene (4) Ethylene

Last Answer : Isoprene

The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Description : The polymerisation of which of the following is used in manufacturing of polythene in industry ? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene

Last Answer : Ethylene