Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)

Pick out the system with minimum boiling azeotrope at 1 atm.
(A) Benzene-toluene
(B) Ethyl alcohol-water
(C) Hydrochloric acid-water
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(B) Ethyl alcohol-water
by

Related questions

A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Description : A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Last Answer : (B) Acetone-carbon disulphide

Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Description : Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Last Answer : (A) Water-hydrochloric acid

Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Description : Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Last Answer : (D) Benzene

Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral is obtained by the chlorination of ethyl alcohol (C) Insecticides acting on the insects through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Last Answer : (D) Benzene hexachloride is not a contact insecticide

Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Description : Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Last Answer : (B) Have very wide boiling points

Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Description : Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Last Answer : (C) Having very wide boiling points

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

__________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Description : __________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Last Answer : (A) Styrene

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Toluene is nitrated and the resulting product is reduct is reduced with tin and hydrochloric acid. The product so obtained is diazotised and then with

Description : Toluene is nitrated and the resulting product is reduct is reduced with tin and hydrochloric acid. The product so obtained is diazotised and then with

Last Answer : Toluene is nitrated and the resulting product is reduct is reduced with tin and hydrochloric acid ... D. mixture of o-and p-bromotoulenes

Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Description : Lecithins are soluble in ordinary solvents except (A) Benzene (B) Ethyl alcohol (C) Methyl alcohol (D) Acetone

Last Answer : Answer : D

Which of the following compounds undergoes nitration most readily? (a) Benzene (b) Toluene (c) Nitrobenzene (d) Benzoic acid

Description : Which of the following compounds undergoes nitration most readily? (a) Benzene (b) Toluene (c) Nitrobenzene (d) Benzoic acid

Last Answer : Toluene

Which of the following statements is false about toluene? (a) can be prepared by treating benzene with methyl chloride in the presence of AlCl3. (b) is converted to benzoic acid on refluxing with acidic KMnO4 solution. (c) on refluxing with concentrated H2SO4 gives a mixture of ortho and para toluenesulfonic acid. (d) can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene.

Description : Which of the following statements is false about toluene? (a) can be prepared by treating benzene with methyl chloride in the presence of AlCl3. (b) is converted to benzoic acid on refluxing with ... (d) can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene.

Last Answer : can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene

40. Among the fo the one that is most reactive towards electrophilic nitration is: (1) Benzene (2) Benzoic acid (3) Nitrobenzene (4) Toluene

Description : 40. Among the following compounds the one that is most reactive towards electrophilic nitration is: (1) Benzene (2) Benzoic acid (3) Nitrobenzene (4) Toluene

Last Answer : Toluene

Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Last Answer : (B) Forms a low boiling azeotrope

Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the constituents of the mixture (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture

Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Description : Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Last Answer : (A) A solution of benzene, toluene and o-xylene

Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Description : Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Last Answer : (D) None of these

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

. Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Description : . Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Last Answer : (A) Benzene, toluene & xylene

Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene(D) Aniline

Description : Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene (D) Aniline

Last Answer : (B) Benzene

Trinitrotoluene (TNT), an explosive, is made by the nitration of (A) Nitrobenzene (B) Toluene (C) Nitrotoluene (D) Benzene

Description : Trinitrotoluene (TNT), an explosive, is made by the nitration of (A) Nitrobenzene (B) Toluene (C) Nitrotoluene (D) Benzene

Last Answer : (B) Toluene

The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Description : The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Last Answer : (D) Benzene-toluene-xylene

Catalytic oxidation of toluene produces (A) Styrene (B) Phenol (C) Benzene (D) Tri-nitro-toluene

Description : Catalytic oxidation of toluene produces (A) Styrene (B) Phenol (C) Benzene (D) Tri-nitro-toluene

Last Answer : (B) Phenol

Out of (a) HNO3 + H2O and (b) C6H6 + C6H5CH3 which will form max. boiling azeotrope ?

Description : Out of (a) HNO3 + H2O and (b) C6H6 + C6H5CH3 which will form max. boiling azeotrope ?

Last Answer : (a) HNO3 + H2O.

Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Description : Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Last Answer : (A) Styrene

Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Description : Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Last Answer : Ans. -CH3 group is electron donating while –NO2 group is electron withdrawing. Therefore, maximum electron density will be in toluene , followed by benzene and at least in m-dinitrobenzene. Therefore, the ease of nitration decreases in the order: Toluene> benzene> m-dinitrobenzene

Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Description : Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Last Answer : Ans. -CH3 group is electron donating while –NO2 group is electron withdrawing. Therefore, maximum electron density will be in toluene, followed by benzene and at least in m-dinitrobenzene. Therefore, the ease of nitration decreases in the order: Toluene> benzene> m-dinitrobenzene

Chemical name of Gammaxane is - (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Description : Chemical name of Gammaxane is - (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Last Answer : (4) Benzene hexachloride Explanation: Gammexane is an insecticide that is the gamma isomer of benzene hexachloride. It is also known as lindane. Benzene hexachloride is any of several stereoisomers of 1,2,3,4,5,6- hexachlorocyclohexane formed by the lightinduced addition of chlorine to benzene.

A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Description : A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Last Answer : (2) Ideal solution Explanation: A mixture of benzene and toluene (60 mole% toluene) enters a distillation column to be separated into two product streams.

Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Description : Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Last Answer : Benzene

Which of the following compounds is most readily sulfonated? (a) Benzene (b) Chlorobenzene (c) Toluene (d) Nitrobenzene

Description : Which of the following compounds is most readily sulfonated? (a) Benzene (b) Chlorobenzene (c) Toluene (d) Nitrobenzene

Last Answer : Toluene

Compared to benzene, nitration of toluene takes place at (a) Same rate (b) Faster rate (c) Slower rate(d) Can not predict

Description : Compared to benzene, nitration of toluene takes place at (a) Same rate (b) Faster rate (c) Slower rate (d) Can not predict

Last Answer : Faster rate

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

Cresols on distillation with zinc dust gives (a) o-Xylene(b) Benzene(c) o- plus p-Xylene(d) Toluene

Description : Cresols on distillation with zinc dust gives (a) o-Xylene (b) Benzene (c) o- plus p-Xylene (d) Toluene

Last Answer : Toluene

When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene(b) Toluene(c) m-Xylene(d) Mesitylene

Description : When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) m-Xylene (d) Mesitylene

Last Answer : Mesitylene

When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Description : When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Last Answer : Benzene

Chemical name of Gammaxane is (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Description : Chemical name of Gammaxane is (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Last Answer : Benzene hexachloride

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Toluene undergoes oxidation to give (a) Benzyl alcohol (b) Quinone (c) Benzaldehyde (d) Benzoic acid

Description : Toluene undergoes oxidation to give (a) Benzyl alcohol (b) Quinone (c) Benzaldehyde (d) Benzoic acid

Last Answer : Benzoic acid

Transportation of 35% oleum during winter suffers from the problem of freezing, which can be overcome by the addition of small quantity of (A) Nitric acid (B) Hydrochloric acid (C) Methyl alcohol (D) Formic acid

Description : Transportation of 35% oleum during winter suffers from the problem of freezing, which can be overcome by the addition of small quantity of (A) Nitric acid (B) Hydrochloric acid (C) Methyl alcohol (D) Formic acid

Last Answer : (A) Nitric acid

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Description : Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Last Answer : (A) Oxidation of naphthalene

Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene

Description : Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene

Last Answer : (C) Isopropanol

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation