Description : Heating a mixture of phosphate rock, coke and sand in an electric furnace produces (A) Phosphoric acid (B) Ammonium phosphate (C) Phosphorous (D) Superphosphate
Last Answer : (C) Phosphorous
Description : Heating of coke, sand & phosphate rock in an electric furnace is done for the manufacture of (A) Phosphoric acid (B) Superphosphate (C) Phosphorous (D) Triple superphosphate
Description : Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke
Last Answer : (D) Silica and coke
Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450
Last Answer : (D) 1400-1450
Description : Yield of elemental phosphorous from rock phosphate is about __________ percent. (A) 1-2 (B) 15-25 (C) 40-45 (D) 60-65
Last Answer : (B) 15-25
Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation
Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous
Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore
Last Answer : Limestone, coke & iron ore
Description : In the manufacture of H3 PO4 (ortho); strong H2 SO4 leaching wet process as compared to electric furnace process (A) Uses lower grade phosphate rock (B) Requires lower capital investment in the plant (C) Produces lower purity acid (D) Is very costly
Last Answer : (C) Produces lower purity acid
Description : Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in ... fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo
Last Answer : (C) Urea is more hygroscopic than ammonium nitrate
Description : Reaction of phosphate rock with 98% H2SO4 produces (A) Ortho-phosphoric acid (B) Superphosphate (C) White phosphorous (D) None of these
Last Answer : (A) Ortho-phosphoric acid
Description : ________ content of the phosphate rock is the pollutant of primary interest in a phosphatic fertiliser plant. (A) Calcium (B) Fluorine (C) Phosphorous (D) Sulphur
Last Answer : (B) Fluorine
Description : Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate
Last Answer : (B) Soda ash
Description : Mixed gas' used in steel plants is a mixture of (A) B.F. gas and coke oven gas (B) Coke oven gas and converter gas (C) Coke oven gas and L.P.G (D) Blast furnace gas and naphtha vapor
Last Answer : (A) B.F. gas and coke oven gas
Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product
Last Answer : (A) Of the better CaO/SiO2 balance for slag formation
Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength
Last Answer : (A) Sulphur & phosphorous content
Description : Reaction of Cresylic acid with __________ produces Tricresyl phosphate.. (A) Phosphorous pentoxide (B) Phosphorous oxychloride (C) Ammonium phosphate (D) Calcium phosphate
Last Answer : (B) Phosphorous oxychloride
Description : A mixture of white powder and coke is heated in nitrogen gas very strongly. The product are
Last Answer : A mixture of white powder and coke is heated in nitrogen gas very strongly. The product are A. `Al_(2)O_(3),C_(2) ... D. `Al_(2)(CO_(3))_(3),N_(2)O`
Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as
Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition
Description : When a mixture containing phosphate is heated with conc. `HNO_(3)` and ammonium molybdated solution, a canary yellow precipitate is formed . The formu
Last Answer : When a mixture containing phosphate is heated with conc. `HNO_(3)` and ammonium molybdated solution, a canary yellow ... PO_(4). (NH_(4))_(2)MO_(4)`
Description : Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite
Last Answer : ANSWER: W -- COKE
Description : Explosion limit of blast furnace gas is 37 to 71% gas in gas-air mixture. It means that the blast furnace gas will explode when burnt in a confined space, if its concentration in the gas-air mixture is __________ percent. (A) < 37% (B) > 71% (C) In between 37 & 71% (D) None of these
Last Answer : (C) In between 37 & 71%
Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100
Last Answer : (A) 25-80
Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80
Last Answer : (D) 80
Description : Main use of soft coke is as __________ fuel. (A) Domestic (B) Blast furnace (C) Foundry (D) None of these
Last Answer : (A) Domestic
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks
Last Answer : (A) Acidic refractory
Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks
Last Answer : (D) Lead or acid-proof bricks
Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate
Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable
Description : Coke ovens in steel plant are heated by (A) Electricity (B) Coke oven gas (C) Mixed gas (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : __________ is an indirectly heated furnace. (A) Open hearth furnace (B) Muffle furnace (C) Soaking pit (D) Reheating furnace
Last Answer : (B) Muffle furnace
Description : Regenerators are installed in (A) Coke ovens (B) Open hearth furnace (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Gross & net calorific value is the same for (A) Blast furnace gas (B) Coke oven gas (C) L.D. converter gas (D) None of these
Last Answer : (C) L.D. converter gas
Description : Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content
Last Answer : (A) CSR & CRI
Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil
Last Answer : (B) Sand
Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these
Last Answer : (B) Brine and coal
Description : High amount of sulphur and phosphorous in coke causes (A) Decrease in its calorific value (B) Increase in its strength (C) Brittleness of steel made by using it (D) None of these
Last Answer : (C) Brittleness of steel made by using it
Description : Addition of small amount of __________ to grey cast iron is done to produce nodular grey cast iron. (A) Manganese (B) Phosphorous (C) Magnesium (D) Chromium
Last Answer : Option C
Description : Both white phosphorous as well as red phosphorous (A) Are soluble in CS2 (B) Burns when heated in air (C) Reacts with hot caustic soda solution to give Phosphine (D) All (A), (B), and (C)
Last Answer : (B) Burns when heated in air
Description : A mixture of salt, sand and water is given, which of these sequence can be used to separate salt -Science
Last Answer : Filtration -> Evaporation -> Condensation
Description : How to separate pieces of copper wire from a mixture of wood chips, sand and salt?
Last Answer : Separating Salt and Sand Using Solubility Pour the salt and sand mixture into a pan. Add water. ... Heat the water until the salt dissolves. ... Remove the pan from heat and allow it to cool until it's safe to handle. Pour the salt water into a separate container. Now collect the sand.
Description : Glass is made of the mixture of-------? A. Quartz and Mica B. Sand and Salt C. Sand and Silicates (Answer) D. None of these
Last Answer : C. Sand and Silicates (Answer)
Description : Electric process as compared to wet process (for the manufacture of phosphoric acid) (A) Can use only high grade phosphate rock (B) Is used less frequently (C) Produces a valuable by-product called gypsum (D) Is weak acid process
Last Answer : (B) Is used less frequently
Description : Most of the phosphorous present in the blast furnace burden enters into (A) Hot metal (B) Flue gases (C) Slag (D) Refractory lining
Last Answer : (A) Hot metal
Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material
Description : The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25
Last Answer : (B) > 25
Description : Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)
Last Answer : (C) Either (A) or (B)
Description : Reaction of __________ acid with phosphate rock produces superphosphates. (A) Hydrochloric (B) Sulphuric (C) Nitric (D) Phosphoric
Last Answer : (B) Sulphuric
Description : Triple superphosphate is made by reacting phosphate rock with __________ acid. (A) Phosphoric (B) Nitric (C) Sulphuric (D) Hydrochloric
Last Answer : (A) Phosphoric
Description : The characteristic of hyperparathyroidism is (A) Low serum calcium (B) High serum phosphorous (C) Low serum calcium and high serum phosphorous (D) High serum calcium and low serum phosphate
Last Answer : Answer : D