What are the raw material used for the manufacture of washing soda by solvay process ?

What are the raw material used for the manufacture of washing soda by solvay process ?
by

1 Answer

Answer :

Ans. Nacl, CaCO3 and NH3
by

Related questions

Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas(B) Ammonia, salt and limestone(C) Ammonia limestone and coke(D) None of these

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

what are the common physical features of alkali metals?

Description : what are the common physical features of alkali metals?

Last Answer : Ans. Large Atomic and ionic radii, Low ionization enthalpies, metallic character, low melting and boiling Point, form ionic bond, low density,show flame coloration ,photoelectric effect.

Why are potassium and caesium, rather than lithium used in photoelectric cells ?

Description : Why are potassium and caesium, rather than lithium used in photoelectric cells ?

Last Answer : Ans. Potassium and caesium have much lower ionization enthalpy than that of lithium. As a result, these metals on exposure to light, easily emit electrons but lithium does not. Therefore, K and Cs rather than Li are used in photoelectric cells

why sodium is less reactive than potassium?

Description : why sodium is less reactive than potassium?

Last Answer : Ans. The ionization enthalpy of potassium is less than that of sodium and the electrode potential of Potassium (-2.95 V) is more negative than that of sodium (-2.71 V) and hence sodium is less reactive than potassium.

When a cation is highly polarizing ? Which alkali metal cation has the highest polarizing power ?

Description : When a cation is highly polarizing ? Which alkali metal cation has the highest polarizing power ?

Last Answer : Ans. A cation is highly polarizing if its charge/size ratio is very high.Li+ has the highest polarizing power .

Name the alkali metal which forms only the normal oxide on heating with air ?

Description : Name the alkali metal which forms only the normal oxide on heating with air ?

Last Answer : Ans. Li.

Name the alkali metal which shows diagonal relationship with Mg?

Description : Name the alkali metal which shows diagonal relationship with Mg?

Last Answer : Ans.Li

Why is sodium metal kept under kerosene oil ?

Description : Why is sodium metal kept under kerosene oil ?

Last Answer : Ans. Sodium metal is highly reactive and combines with air forming sodium oxide.

Name the chief factor responsible for the anomalous behavior of lithium.

Description : Name the chief factor responsible for the anomalous behavior of lithium.

Last Answer : Ans. High polarizing power (charge/size ratio).

What happens when KO2 reacts with water ?

Description : What happens when KO2 reacts with water ?

Last Answer : Ans. 2 KO2 + 2H2O ------> 2 KOH + H2O2 + O2

How is Sodium Carbonate (Washing Soda), Na2CO3·10H2O manufactured by “Solvay Process”

Description : How is Sodium Carbonate (Washing Soda), Na2CO3·10H2O manufactured by “Solvay Process” 

Last Answer : Principle-- In this process, advantage is taken of the low solubility of sodium hydrogencarbonate whereby it gets precipitated in the reaction of sodium chloride with ammonium hydrogencarbonate. The latter is prepared ... treated with Ca(OH)2. Calcium chloride is obtained as a by-product. 

Name the process by which washing soda is prepared. (a)Solvay process (b) ammonium soda process (c) Both (a) and (b) (d)none of above

Description : Name the process by which washing soda is prepared. (a)Solvay process (b) ammonium soda process (c) Both (a) and (b) (d)none of above

Last Answer : (c) Both (a) and (b)

__________ process is used for the manufacture of sodium carbonate by ammonia soda process. (A) Ostwald's (B) Bosch (C) Solvay (D) Haber's

Description : __________ process is used for the manufacture of sodium carbonate by ammonia soda process. (A) Ostwald's (B) Bosch (C) Solvay (D) Haber's

Last Answer : (C) Solvay

Which of the following is not required in the manufacture of soda ash by Solvay process? (A) Ammonia (B) Limestone (C) Nitric acid (D) None of these

Description : Which of the following is not required in the manufacture of soda ash by Solvay process? (A) Ammonia (B) Limestone (C) Nitric acid (D) None of these

Last Answer : (C) Nitric acid

Solvay process is used for the manufacture of (A) Caustic soda (B) Soda ash (C) Caustic potash D) Soda lime

Description : Solvay process is used for the manufacture of (A) Caustic soda (B) Soda ash (C) Caustic potash (D) Soda lime

Last Answer : (B) Soda ash

Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda

Why Solvay process cannot be extended for the manufacture of potassium carbonate?

Description : Why Solvay process cannot be extended for the manufacture of potassium carbonate? 

Last Answer : Solvay process cannot be extended to the manufacture of potassium carbonate because potassium hydrogencarbonate is too soluble to be precipitated by the addition of ammonium hydrogencarbonate to a saturated solution of potassium chloride. 

Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Last Answer : (1) sand, soda, limestone Explanation: Quartz sand (silica) is the main raw material in commercial glass production. While fused quartz (primarily composed of SiO2) is used for some special ... over 1200 degree C (2192 degree F). Normally, other substances are added to simplify processing.

Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda 

Last Answer : sand, soda, limestone

The carbonating tower used in Solvay process of soda ash manufactureis made of(A) Cast iron(B) Stainless steel(C) Karbate(D) Lead lined steel

Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel

Last Answer : (A) Cast iron

In the production of soda ash by Solvay process, the by-product is (A) CaCl2 (B) NH4Cl (C) NH3 (D) NaOH

Description : In the production of soda ash by Solvay process, the by-product is (A) CaCl2 (B) NH4Cl (C) NH3 (D) NaOH

Last Answer : (A) CaCl2

_________ process is used for producing soda ash. (A) Chamber (B) Chance (C) Tromp (D) Solvay

Description : _________ process is used for producing soda ash. (A) Chamber (B) Chance (C) Tromp (D) Solvay

Last Answer : (D) Solvay

In the Solvay process, the product from the calciner is (A) Light soda ash (B) Dense soda ash (C) Sodium bicarbonate (D) Dehydrated soda ash

Description : In the Solvay process, the product from the calciner is (A) Light soda ash (B) Dense soda ash (C) Sodium bicarbonate (D) Dehydrated soda ash

Last Answer : (A) Light soda ash

Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Description : Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Last Answer : (C) Is soluble in ammonium chloride and potassium chloride solution

What are the raw materials used for the precipitation of Na2Co3 by Solvay ammonium Process ?

Description : What are the raw materials used for the precipitation of Na2Co3 by Solvay ammonium Process ?

Last Answer : Sodium Chloride, limestone and ammonia

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda

Description : The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda

Last Answer : (2) Sulphuric acid Explanation: It is also a central substance in the chemical industry. It is widely produced by contact process. Now days, sulphuric acid is prepared by contact process all over ... process is based upon the catalytic oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3).

Enlist raw material for the manufacturing of Soda Ash.

Description : Enlist raw material for the manufacturing of Soda Ash.  

Last Answer : Raw materials for Sodium Carbonate Salt(brine) Coal limestone 

Potassium carbonate cannot be prepared by Solvay process. Why?

Description : Potassium carbonate cannot be prepared by Solvay process. Why?

Last Answer : Ans. Potassium carbonate cannot be prepared by Solvay process because potassium bicarbonate being more soluble than sodium bicarbonate does not get precipitated when CO2 is passed through a Conc. Solution of KCl saturated with ammonium.

K2CO3 Cannot be prepared by solvay process ?

Description : K2CO3 Cannot be prepared by solvay process ?

Last Answer : Ans. Because KHCO3 is highly soluble in water

Which one of the following raw material is used in the manufacture of foam used in mattresses cushions etc. A. Phenol B. Urea C. Methanol D. Ethanol

Description : Which one of the following raw material is used in the manufacture of foam used in mattresses cushions etc. A. Phenol B. Urea C. Methanol D. Ethanol

Last Answer : ANSWER: A

Caprolactam, a raw material for the manufacture of nylon-6, isproduced from(A) Phenol(B) Naphthalene(C) Benzene(D) Pyridine

Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

The raw material used to manufacture ethyl alcohol is

Description : The raw material used to manufacture ethyl alcohol is

Last Answer : molasses.

Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Description : Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Last Answer : C. Paper (Answer)

Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Description : Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Last Answer : B. Poplar (Answer)

Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

rting raw material for the manufacture of alum is(A) Alumina(B) Gypsum(C) Bauxite(D) Ammonium bicarbonate

Description : rting raw material for the manufacture of alum is (A) Alumina (B) Gypsum (C) Bauxite (D) Ammonium bicarbonate

Last Answer : (C) Bauxite

In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Description : In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Last Answer : (D) Fine teak wood

Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Description : Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol

Description : Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol

Last Answer : (B) Perchloroethylene

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C

Washing soda is the common name of- (1) Calcium Carbonate (2) Calcium Bi-Carbonate (3) Sodium Carbonate (4) Sodium Bi-Carbonate

Description : Washing soda is the common name of- (1) Calcium Carbonate (2) Calcium Bi-Carbonate (3) Sodium Carbonate (4) Sodium Bi-Carbonate

Last Answer : (3) Sodium Carbonate Explanation: Washing soda, sodium carbonate decahydrate, efflorescent crystals used for washing, especially textiles. It is a compound of sodium (q.v.).