Cellulose percentage in bamboo fibre is about (A) 10 (B) 20 (C) 50 (D) 85

Cellulose percentage in bamboo fibre is about
(A) 10
(B) 20
(C) 50
(D) 85
by

1 Answer

Answer :

(C) 50
by

Related questions

Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Description : Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Last Answer : (A) 5

_________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Description : _________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Last Answer : (A) Cellulose

Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Description : Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Main constituent of cotton fibre is (A) Lignin (B) Cellulose (C) Starch (D) Gelatine

Description : Main constituent of cotton fibre is (A) Lignin (B) Cellulose (C) Starch (D) Gelatine

Last Answer : (B) Cellulose

The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Description : The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Last Answer : (A) Avoid mechanical weakening of fibre

Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Description : Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Last Answer : (D) None of these

Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Last Answer : Answer: Option C

What is the best source of pure cellulose? (a) Coir (b) Cotton fibre (c) Jute fibre (d) Hemp

Description : What is the best source of pure cellulose? (a) Coir (b) Cotton fibre (c) Jute fibre (d) Hemp

Last Answer : Ans: (b)

Which of the following constitutes fibre or roughage in food? (A) Cellulose (B) Pectin (C) Inulin (D) All of these

Description : Which of the following constitutes fibre or roughage in food? (A) Cellulose (B) Pectin (C) Inulin (D) All of these

Last Answer : Answer : D

Silk fibre chemically is – (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Description : Silk fibre chemically is – (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Last Answer : (3) Protein Explanation: Silk is a natural protein fibre, some forms of which can be woven into textiles. The protein fibre of silk is composed mainly of fibroin and produced by ... fibre, which allows silk cloth to refract incoming light at different angles, thus producing different colours.

Silk fibre chemically is : (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Description : Silk fibre chemically is : (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Last Answer : Protein

If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Description : If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Last Answer : (d) 0.85 W

P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Last Answer : (A) 42-50

285. Sucrose content in the raw juice extracted from sugar cane is about __________ percent(A) 1 - 2 (B) 15 - 20 (C) 50 - 60 (D) 80 - 85

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Alcohol percentage in molasses may be around (A) 10 (B) 40(C) 70 (D) 85

Description : Alcohol percentage in molasses may be around (A) 10 (B) 40 (C) 70 (D) 85

Last Answer : (B) 40

A national random sample of 20 ACT scores from 2010 is listed below. Calculate the sample mean and standard deviation. 29, 26, 13, 23, 23, 25, 17, 22, 17, 19, 12, 26, 30, 30, 18, 14, 12, 26, 17, 18 a. 20.50, 5.79 b. 20.50, 5.94 c. 20.85, 5.79 d. 20.85, 5.94

Description : A national random sample of 20 ACT scores from 2010 is listed below. Calculate the sample mean and standard deviation. 29, 26, 13, 23, 23, 25, 17, 22, 17, 19, 12, 26, 30, 30, 18, 14, 12, 26, 17, 18 a. 20.50, 5.79 b. 20.50, 5.94 c. 20.85, 5.79 d. 20.85, 5.94

Last Answer : Katie earned 84,92,84,75 and 70 on her first 5 tests. What is the minimum grade Katie needs to earn on the next test to have a mean of 84?

Carbon percentage (by weight) in crude petroleum may be about (A) 65 (B) 75 (C) 85 (D) 95

Description : Carbon percentage (by weight) in crude petroleum may be about (A) 65 (B) 75 (C) 85 (D) 95

Last Answer : (C) 85

Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Description : Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Last Answer : (B) 30

What is the percentage of cellulose in cotton ?

Last Answer : Cellulose content is 94%.

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

what is the height of The atmosphere layer mesosphere? A. 85 km (Answer) B. 50 km C. 40 km D. 10 km

Description : what is the height of The atmosphere layer mesosphere? A. 85 km (Answer) B. 50 km C. 40 km D. 10 km

Last Answer : A. 85 km (Answer)

Formation width for banks for B.G. single line section is (a) 6.10 m (b) 6.50 m (c) 6.85 m* (d) 7.0 m

Description : Formation width for banks for B.G. single line section is (a) 6.10 m (b) 6.50 m (c) 6.85 m* (d) 7.0 m

Last Answer : (c) 6.85 m*

10 people ordered 1 hamburger with lettuce, tomato, onion, and a small drink. A. $1.85. B. $1.80. C. $18.50. D. $18.00.

Description : 10 people ordered 1 hamburger with lettuce, tomato, onion, and a small drink. A. $1.85. B. $1.80. C. $18.50. D. $18.00.

Last Answer : C. $18.50.

Cetane number of diesel used in trucks may be about (A) 50 (B) 14 (C) 35 (D) 85

Description : Cetane number of diesel used in trucks may be about (A) 50 (B) 14 (C) 35 (D) 85

Last Answer : (A) 50

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85(B) 50 (C) 3 (D) 97

Description : U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85 (B) 50 (C) 3 (D) 97

Last Answer : (C) 3

In a ball mill, the volume occupied by the balls (when the mill is stopped) is about __________ percent of the volume of the mill. (A) 35 (B) 50 (C) 70 (D) 85

Description : In a ball mill, the volume occupied by the balls (when the mill is stopped) is about __________ percent of the volume of the mill. (A) 35 (B) 50 (C) 70 (D) 85

Last Answer : (B) 50

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

Hardgrove Grindability index of four coal samples are given below. Which of them is the easiest to grind? (A) 50 (B) 70 (C) 85 (D) 100

Description : Hardgrove Grindability index of four coal samples are given below. Which of them is the easiest to grind? (A) 50 (B) 70 (C) 85 (D) 100

Last Answer : (D) 100

Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Description : Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Last Answer : (B) 50

The percentage of Vitamin A in the form of esters is stored in the liver: (A) 80 (B) 85 (C) 90 (D) 95

Description : The percentage of Vitamin A in the form of esters is stored in the liver: (A) 80 (B) 85 (C) 90 (D) 95

Last Answer : Answer : D

The percentage of Nitrogen in Air is - (1) 0.94 (2) 0.03 (3) 78.03 (4) 85.02

Description : The percentage of Nitrogen in Air is - (1) 0.94 (2) 0.03 (3) 78.03 (4) 85.02

Last Answer : (3) 78.03 Explanation: By volume, thy air contains 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.039% carbon dioxide, and small amounts of other gases. Air also contains a variable amount of water vapor, on average around 1%.

Percentage of water in buffalo milk is:- a. 65-67 % b. 70-75 % c. 80-85 % d. 87-90 %

Description : Percentage of water in buffalo milk is:- a. 65-67 % b. 70-75 % c. 80-85 % d. 87-90 %

Last Answer : d. 87-90 %

The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Description : The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Last Answer : (D) 75 and 83

If is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is (A) 0.70 P (B) 0.75 P (C) 0.80 P (D) 0.85 p

Description : If is the percentage of water required for normal consistency, water to be added for determination of initial setting time, is (A) 0.70 P (B) 0.75 P (C) 0.80 P (D) 0.85 p

Last Answer : Answer: Option D

The percentage of litrogen in Air is (1) 0.94 (2) 0.03 (3) 78.03 (4) 85.02

Description : The percentage of litrogen in Air is (1) 0.94 (2) 0.03 (3) 78.03 (4) 85.02

Last Answer : 78.03

The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Description : The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Last Answer : Answer : D

The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration for the areas as 30 minutes and using the formula Ps = 900/(t + 60) the maximum run off is A. 0.10 cumec B. 0.12 cumec C. 0.15 cumec D. 0.20 cumec

Description : The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration ... 60) the maximum run off is A. 0.10 cumec B. 0.12 cumec C. 0.15 cumec D. 0.20 cumec

Last Answer : ANS: C

P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Last Answer : (B) 15-20

Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Description : Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Last Answer : (C) 70

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Description : Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Last Answer : (B) 2.5

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8