Description : The destruction of water-borne pathogens is termed as disinfection of water. Which of the following is a water disinfectant? (A) Chlorine (B) Alkalis (C) Benzene hexachloride (D) Alkyl benzene sulphonate (ABS)
Last Answer : (A) Chlorine
Description : Which of the following is a detergent? (A) Fatty alcohol (B) Alkyl benzene sulphonate (ABS) (C) Fatty acids (D) Methylene chloride
Last Answer : (B) Alkyl benzene sulphonate (ABS)
Description : Presence of non-biodegradable substances, like alkyl benzene sulphonate (ABS) from the detergents in polluted water stream causes (A) Fire hazards (B) Explosion hazards (C) Persistent foam (D) Depletion of dissolved oxygen
Last Answer : (C) Persistent foam
Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film
Last Answer : (A) Detergent
Description : The most popular and common detergent i.e., alkyl benzene sulfonate (ABS) is a/an __________ detergent. (A) Cationic (B) Anionic (C) Amphoteric (D) Semi polar
Last Answer : (B) Anionic
Description : Chlorination of benzene is done to produce benzene hexachloride (a pesticide) in a photochemical reactor lined with (A) Karbate (B) Lead or glass (C) Fireclay bricks (D) PVC
Last Answer : (B) Lead or glass
Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide
Last Answer : (D) Benzene hexachloride is not a contact insecticide
Description : Lindane is (A) Not a fumigant (B) BHC (Benzene Hexachloride) containing 99% γ-isomer (C) A by-product of BHC manufacture (D) Both (B) and (C)
Last Answer : (B) BHC (Benzene Hexachloride) containing 99% γ-isomer
Description : BHC (Benzene hexachloride) is made by the chlorination of benzene (A) Which is an addition reaction (B) Which is a substitution reaction (C) In absolute dark (D) In presence of sunlight
Last Answer : (A) Which is an addition reaction
Description : Which of the following statements are correct ? (i) Benzene hexachloride (BHC) is a non-biodegradable pollutant. (ii) Anthropogenic air pollutants are
Last Answer : Which of the following statements are correct ? (i) Benzene hexachloride (BHC) is a non-biodegradable pollutant. (ii) ... b B. a,c C. b,c D. c,d
Description : Chemical name of Gammaxane is - (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride
Last Answer : (4) Benzene hexachloride Explanation: Gammexane is an insecticide that is the gamma isomer of benzene hexachloride. It is also known as lindane. Benzene hexachloride is any of several stereoisomers of 1,2,3,4,5,6- hexachlorocyclohexane formed by the lightinduced addition of chlorine to benzene.
Description : Chemical name of Gammaxane is (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride
Last Answer : Benzene hexachloride
Description : Which of the following is not a correct statement concerning the FriedelCrafts acylation of benzene? (a) An alkyl group substitutes for a hydrogen. (b) The benzene ring attacks an acylium ion. (c) The acylium ion is resonance stabilized. (d) The acylium ion is often produced from an acyl chloride.
Last Answer : An alkyl group substitutes for a hydrogen
Description : Benzene is used (A) As a motor fuel (B) As an explosive (C) For making insecticides (e.g., DDT, BHC etc.), detergent & rubber (SBR) (D) As a perfume
Last Answer : (C) For making insecticides (e.g., DDT, BHC etc.), detergent & rubber (SBR) (D) A
Description : Detergent is produced by the sulphonation of dodecyl benzene, which is an __________ reaction. (A) Endothermic (B) Exothermic (C) Irreversible (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these
Last Answer : (D) None of these
Description : Automobile steering wheels are normally made of (A) Cellulose acetate (B) Cellulose nitrate (C) PVC (D) High density polythene
Last Answer : (A) Cellulose acetate
Description : Celluloid is (A) Cellulose acetate (B) Regenerated cellulose (C) Cellulose nitrate (D) Cellulose acetate butyrat
Last Answer : (C) Cellulose nitrate
Description : Viscose rayon is chemically (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Cellulose acetate (D) Regenerated cellulose acetate
Last Answer : (D) Regenerated cellulose acetate
Description : Celluloid is chemically (A) Cellulose acetate (B) Regenerated cellulose (C) Cellulose nitrate (D) Cellulose acetate butyrate
Description : Which of the following is an explosive? (A) Nitro-glycerine (B) Trinitrotoluene (TNT) (C) Cellulose nitrate (D) All (A), (B), and (C)
Last Answer : (D) All (A), (B), and (C)
Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer
Last Answer : (C) Same as thermoset phenol formaldehyde
Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer
Last Answer : (C) Same as thermosetting phenol-formaldehyde
Description : The first plastic was a mixture of cellulose nitrate and camphor invented in the 1860's by John Hyatt. What was the trademark given to this material?
Last Answer : ANSWER: CELLULOID
Description : Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite
Last Answer : B. teflon
Description : Polytetrafluoroethylene (PTFE) is commonly used in sliding bearings. Why?
Last Answer : The choice of sliding surface of bearings is of vital importance because the sliding surfaces generate frictional forces which are exerted on the bearings and substructure of the bridge. For ... be designed with dimples to avoid the lubricant from squeezing out under repeated translation movements.
Description : What safety precaution should you take when working with extruded polytetrafluoroethylene insulated wiring?
Last Answer : Avoid breathing the vapors when the insulation is heated.
Description : Mercaptans is represented as (where R and R' are alkyl groups) (A) R-COOH (B) R-S-H (C) R-S-R (D) R-S-R'
Last Answer : (B) R-S-H
Description : Hello, please there is no well-founded chemist who would know what would be created by mixing these substances, in approximately the given ratio: toluene 70%, ethanol 20%, gasoline 9.5% and potassium salt of ... its properties. Please advise how to dissolve it - and release it ... Thanks, Alfi.
Last Answer : go to the store, buy it all and try it .. then write how you ended up
Description : Which of the following alkane is synthesised from single alkyl halide by wurtz reaction:-
Last Answer : Which of the following alkane is synthesised from single alkyl halide by wurtz reaction:- A. B. C. D.
Description : Best method for preparing primary amines from alkyl halides without changing the number of carbon atoms in the chain is
Last Answer : Best method for preparing primary amines from alkyl halides without changing the number of carbon atoms in ... reaction D. Reaction with `NH_(3)`
Description : In order to prepare a `1^(@)` amine from an alkyl halide with simultaneous addition of one `CH_(2)` group in the carbon chain, the reagent used as sou
Last Answer : In order to prepare a `1^(@)` amine from an alkyl halide with simultaneous addition of one `CH_(2)` group in the ... C_(6)H_(4)(CO)_(2)N^(-)K^(+)`
Description : Compound P on treatement with `CH_(2)N_(2)` (diazomethane) produces compound Q. compound Q on reaction with Hl produces two alkyl iodides R and S . Al
Last Answer : Compound P on treatement with `CH_(2)N_(2)` (diazomethane) produces compound Q. compound Q on reaction ... 2-methyl-2-propanol D. 2-methyl-1-propanol
Description : (A) Allyl free radical is more stable than simple alkyl free radical. (R) The allyl free radical is stabilized by resonance.
Last Answer : (A) Allyl free radical is more stable than simple alkyl free radical. (R) The allyl free radical is ... IF (A) is incorrect but (R) is correct.
Description : The order of reactivities of the following alkyl halides for a `S_(N^(2))` reaction is :
Last Answer : The order of reactivities of the following alkyl halides for a `S_(N^(2))` reaction is : A. RF > RCl > RBr > ... RBr > RF > RI D. RI > RBr > RCl > RF
Description : Which of the following alkyl halides is hydrolysed by `S_(N^(1))` mechanism?
Last Answer : Which of the following alkyl halides is hydrolysed by `S_(N^(1))` mechanism? A. `CH_(3)Cl` B. `CH_(3)CH_(2)Cl` ... (2)CH_(2)Cl` D. `(CH_(3))_(3)"CCl"`
Description : `S_(N^(1))` mechanism for the hydrolysis of an alkyl halide involves the formation of intermediate:
Last Answer : `S_(N^(1))` mechanism for the hydrolysis of an alkyl halide involves the formation of intermediate: ... B. carbocation C. carbanion D. none of these
Description : Assertion: Bond angle at oxygen in ethehers is greater than ideal tetrahedral angle Reason: Stearic hindrance between alkyl groups increase bond angle
Last Answer : Assertion: Bond angle at oxygen in ethehers is greater than ideal tetrahedral angle Reason: Stearic ... D. Assertion is false, Reason is true
Description : Assertion: Phosphorus tribromide is ofter preferred as a reagent for the transformation of an alcohol to the corresponding alkyl bromide Reason: The n
Last Answer : Assertion: Phosphorus tribromide is ofter preferred as a reagent for the transformation of an alcohol to ... D. Assertion is false, Reason is true
Description : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar aprotic solvents O-alkylation with alkyl halide.
Last Answer : Statement-1: In protic solvents phenoxide ion is alkylated primarily at C-alkylation whereas in polar ... Statement-1 is false, Statement-2 is true
Description : Assertion (A): Alkyl aryl ethers on reaction with HI give alkyl iodide phenols Reason (R): Aryl - oxygen bond is weaker than alkyl oxygen bond
Last Answer : Assertion (A): Alkyl aryl ethers on reaction with HI give alkyl iodide phenols Reason (R): Aryl - oxygen ... is false D. A is false but R is true
Description : Which alkyl halide would be preferred for the synthesis of the following ether by Williamson synthesis ? `H_(5)C_(2)-O-overset(CH_(3))overset(|)unders
Last Answer : Which alkyl halide would be preferred for the synthesis of the following ether by Williamson ... chloride C. Ethyl chloride D. Methyl chloride
Description : The alkyl radical in plasmalogen is an alcohol: (A) Saturated (B) Unsaturated (C) Both (A) and (B) (D) None of these
Last Answer : Answer : A
Description : Why the presence of a base is essential in the ammonolysis of alkyl halides ?
Last Answer : During ammonolysis of alkyl halides, the acid liberated during the reaction combines with the amine formed to form amine salt. To liberate free amine from the amine salt, a base is needed.
Description : Name the members of the alkyl groups.
Last Answer : Methyl, ethyl, propyl etc.
Description : When ammonia is added to an alkyl halide, in the presence of base : (a) primary amines form (b) amides form (c) nitrated alkyl halides form (d) quaternary ammonium salts form
Last Answer : primary amines form
Description : Aryl halides are less reactive towards nucleophilic substitution as compared to alkyl halides due to (a) Inductive effect (b) Resonance stabilization (c) Tautomerism (d) Stereoisomerism
Last Answer : Resonance stabilization
Description : Uriedes are (a) Halogen derivatives of urea (b) Acetyl derivatives of urea (c) Alkyl derivatives of urea (d) None of these
Last Answer : Acetyl derivatives of urea
Description : Alkyl halides react with ammonia in the presence of base to form : (a) primary amines (b) nitrated alkyl halides (c) amides (d) quaternary ammonium salts
Last Answer : primary amines