Description : While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000
Last Answer : (C) 4500
Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850
Last Answer : (B) 350 to 450
Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200
Last Answer : (A) 700 - 1000
Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500
Last Answer : (C) 1100
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700
Last Answer : (C) 700
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900
Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270
Last Answer : (A) 80-170
Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300
Last Answer : (B) 60-70
Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100
Last Answer : (D) 1000-1100
Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450
Last Answer : (D) 1400-1450
Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300
Last Answer : (B) 400 - 700
Description : A small dairy farm daily produces 100 kilograms of average quality buffalo milk and sells it to an organised dairy at the rate of Rs. 100 per kilogram of total solids contained in the milk. How much would be the daily gross ... (D) Between Rs. 1,000 and Rs. 1,100 (E) Between Rs. 1,650 and Rs. 1,850
Last Answer : (B) Between Rs. 1,250 and Rs. 1,400
Description : What is the average score in an exam taken by 500 students where the minimum score is 200? a. Half the students scored above 700. b. Half the students scored below 700. c. The maximum score in the ... . e) If the data in statement a, b and c together are not sufficient to answer the question.
Last Answer : The fact that half scored above 700, and other half less than 700 does not tell the actual distribution of scores to calculate the average. Statement (c) also does not help us determine the average. Answer: e)
Description : Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000
Last Answer : (B) 650
Description : Flash point of most vegetable oils is about __________ °C. (A) 50 (B) 100 (C) 200 (D) 300
Last Answer : (C) 200
Description : Mannheim furnace is used in the manufacture of (A) Hydrochloric acid (B) H2SO4 by Chamber process (C) Calcium carbide (D) Corundum
Last Answer : (A) Hydrochloric acid
Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300
Last Answer : (B) 1 and 200
Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600
Last Answer : (B) 200-300
Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000
Last Answer : (B) 2000
Description : Capital employed is Rs.50,000 Trading Profit amounted Rs.12,200, Rs.15,000 and Rs.2000 loss for 2016, 2017 and 2018 respectively. Rate of interest is 8% and the rate of risk is 2% Remuneration from alternative employment of the ... A Rs.8,000 B Rs.8,800 C Rs.8,850 D Rs.9,500 ANS: Rs.8,850
Last Answer : A
Description : A high temperature waste heat recovery unit consists of recovering waste heat at temperaturesgreater than _______. a) 200 °C b) 500 °C c) 300 °C d) 400 °C
Last Answer : 400 °C
Description : Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140
Last Answer : (C) 90
Description : Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150
Last Answer : (C) 150
Description : The monthly incomes of two persons are in the ratio 5 : 4 and their monthly expenditures are in the ratio 9 : 7. If each person saves Rs. 500 per month, then what are their monthly incomes? a) Rs 8000 and Rs ... Rs 3750 and Rs 3000 c) Rs 5000 and Rs 4000 d) Rs 4500 and Rs 4000 e) None of the above
Last Answer : Let the incomes of two persons be 5x and 4x let the expenditures of them be 9y and 7y Each person saves Rs. 500 Therefore, 5x - 9y = 500 4x - 7y = 500 Solving the above equations, 20x - 36y = 2000 20x - ... = 500 + 9(500) = 5000 X = 1000 Hence, their salaries are Rs. 5000 and Rs. 4000 Answer: c)
Description : What is the difference in the number of products manufactured by the Company in the year 2009 and 2008 ? (1) 4000 (2) 5500 (3) 3500 (4) 4500 (5) None of these
Last Answer : (5) None of these
Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7
Last Answer : (D) 18.7
Description : Calorific value of blast furnace gas is around __________ KCal/Nm3 . (A) 850 (B) 1800 (C) 4200 (D) 6500
Last Answer : (A) 850
Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 600 (C) 1100 (D) 1600
Description : While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000
Description : A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.
Last Answer : (C) 50 times per second per mile of distance travelled.
Description : Fermentator temperature during production of alcohol from molasses is around __________ °C. (A) 5 (B) 30 (C) 130 (D) 300
Last Answer : (B) 30
Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0
Last Answer : (A) 15-30
Description : Keeping the pressure constant, to double the volume of a given mass of an ideal gas at 27°C, the temperature should be raised to __________ °C. (A) 270 (B) 327 (C) 300 (D) 540
Last Answer : (B) 327
Description : A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300
Last Answer : (A) 370
Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300
Last Answer : (C) 350-400
Description : Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100
Last Answer : (A) 150-300
Description : Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800
Last Answer : (D) 800
Description : Infrared range for fiber optics ∙ a. 400 – 700 nm ∙ b. 700 – 1200 nm ∙ c. 300 – 2000 nm ∙ d. 400 – 7000 nm
Last Answer : b. 700 – 1200 nm
Description : The conductivity of a material with current density 1 unit and electric field 200 μV is a) 2000 b) 3000 c) 4000 d) 5000
Last Answer : d) 5000
Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200
Last Answer : (B) 100
Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room ... B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic
Last Answer : ANSWER: C
Description : 2/3 part of the sum is lent out at 3%, 1/6 part is lent out at 6% and remaining part at 12%. All the three parts are lent out at simple interest. If the annual income is Rs. 35, what is the sum? (a) Rs.500 (b) Rs.600 (c) Rs.700 (d) Rs.850 (e) Rs.950
Last Answer : (c) Rs.700
Description : Nitriding of steel is done (in electric furnace) at __________ °C. (A) 510 (B) 1720 (C) 2210 (D) 910
Last Answer : (A) 510
Description : The maximum delivery pressure of a reciprocating compressor may be about __________ kg/cm2 . (A) 1000 (B) 2000 (C) 3000 (D) 4000
Last Answer : (D) 4000
Description : In glycoproteins the carbohydrate is in the form of disaccharide units, the number of units are (A) 50–100 (B) 200–300 (C) 400–500 (D) 600–700
Last Answer : Answer : D
Description : Chlorophyll formation takes place within a light wavelength of _________: a. 150-200 b. 200-300 c. 300-675 d. 700-900
Last Answer : 300-675
Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa
Last Answer : d. 300 hPa
Description : During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700
Last Answer : (d) 18,700
Description : The main constituent of carborundum is __________ carbide. (A) Calcium (B) Silicon (C) Boron (D) Aluminium
Last Answer : (B) Silicon