Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800
Last Answer : (B) 900-1000
Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850
Last Answer : (B) 350 to 450
Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600
Last Answer : (B) 200-300
Description : The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500
Last Answer : (C) 2000-2200
Description : Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas
Last Answer : (A) Iron-steam reaction
Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these
Last Answer : (B) Distillation
Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic
Last Answer : (B) Endothermic
Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room ... B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic
Last Answer : ANSWER: C
Description : 1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the ... will be (A) 15 min (B) 22 min (C) 44 min (D) 51 min
Last Answer : (D) 51 min
Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100
Last Answer : (D) 1000-1100
Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300
Last Answer : (C) 350-400
Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Most of the ozone in the atmosphere is concentrated in the _____ A. Mesosphere B. Troposphere C. Stratosphere D. Ionosphere
Description : Coke is made by heating coal in the absence of air at-----? A. 700 °C B. 900 °C C. 1300 °C (Answer) D. 1700 °C
Last Answer : C. 1300 °C (Answer)
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700
Last Answer : (C) 700
Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900
Description : Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha
Last Answer : (A) Semet-Solvay process
Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium
Last Answer : (C) Nickel oxide on alumina support
Description : Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1
Last Answer : (B) 3.5 : 1
Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking
Last Answer : (A) Electrolysis of water
Description : Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water
Last Answer : (D) Electrolysis of water
Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium
Last Answer : (A) Nickel
Description : Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha
Last Answer : (A) Combustion of sulphur
Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas
Last Answer : (C) Electrolysis of water
Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation
Last Answer : (A) Shift conversion
Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450
Last Answer : (B) 150
Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0
Last Answer : (A) 15-30
Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F
Last Answer : (C) 50 -100 BTU/hr. ft. 2°F
Description : Flash point of most vegetable oils is about __________ °C. (A) 50 (B) 100 (C) 200 (D) 300
Last Answer : (C) 200
Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98
Last Answer : (A) 85
Description : Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100
Last Answer : (A) 150-300
Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000
Last Answer : (D) 5000-15000
Description : Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R
Last Answer : (A) 200 °F
Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270
Last Answer : (A) 80-170
Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300
Last Answer : (B) 60-70
Description : Tidal volume and expiratory reserve volume of an athlete is 500 mL and 1000 mL respectively. What will be his expiratory capacity if the residual volume is 1200 mL? (a) 2700 mL (b) 1500 mL (c) 1700 mL (d) 2200 mL
Last Answer : b) 1500 mL
Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300
Last Answer : (B) 400 - 700
Description : Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue
Last Answer : (A) Olefinic hydrocarbon
Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil
Last Answer : (A) Naphtha or straight run gasoline
Description : . Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)
Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation
Last Answer : (C) Reforming
Description : High temperature carbonisation of coal takes place at __________ °C. (A) 2000 (B) 700 (C) 1100 (D) < 500
Last Answer : (C) 1100
Description : Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80
Last Answer : (C) 30 to 50
Description : Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C
Last Answer : (B) 15-45 Kgf/cm2 & 450-550°C
Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10
Last Answer : (C) 1000-10000
Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000
Last Answer : A) 2 to 3
Description : Molecular sieves are regenerated by heating to __________ °C. (A) < 150 (B) 200-330 (C) > 500 (D) > 1000
Last Answer : (B) 200-330
Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300
Last Answer : (B) 1 and 200
Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200
Last Answer : (B) 100
Description : Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%
Last Answer : D. 83%