Description : The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline
Last Answer : Ans:(a)
Description : Hard coke is manufactured from (A) Lignite (B) Bituminous coal (C) Semi-anthracite (D) Anthracite
Last Answer : (B) Bituminous coal
Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas
Last Answer : (C) Blast furnace gas/mixed gas
Description : Which of the following is not a manufactured fuel? (A) Coke breeze (B) Soft coke (C) Colloidal fuels (D) Charcoal
Last Answer : (A) Coke breeze
Description : Which of the following has the maximum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil
Last Answer : (C) Petrol
Description : Which of the following petroleum products contain minimum sulphur? (A) Naphtha (B) Kerosene (C) LSHS (D) Furnace oil
Last Answer : (A) Naphtha
Description : Which of the following has the minimum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil
Last Answer : (D) Furnace oil
Description : Which of the following fuels has the highest calorific value per unit mass (kcal/kg)? (A) Coal (B) Kerosene (C) Natural gas (D) Furnace oil
Description : In a furnace operation, which is not preheated? (A) Solid fuels (B) Hydrocarbon containing fuel gases (e.g. coke oven gas, refinery gas etc.) (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas
Last Answer : (A) Producer gas
Description : Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas
Last Answer : (A) Blast furnace gas
Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which is the heaviest fuel gas out of the following? (A) Blast furnace gas (B) Coke oven gas (C) Water gas (D) Carburetted water gas
Description : Which of the following is a poisonous fuel gas? (A) Coke oven gas (B) Blast furnace gas (C) Natural gas (D) None of these
Last Answer : (B) Blast furnace gas
Description : Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal
Last Answer : (C) Natural gas
Description : Main use of soft coke is as __________ fuel. (A) Domestic (B) Blast furnace (C) Foundry (D) None of these
Last Answer : (A) Domestic
Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke
Last Answer : (B) Coke oven gas
Description : . Which of the following fuel gases contains maximum amount of carbon monoxide? (A) Coke oven gas (B) Water gas (C) Blast furnace gas (D) L.D. converter gas
Last Answer : (D) L.D. converter gas
Description : Which of the following is not a by-product fuel? (A) Sewage gas (B) Refinery gas (C) Producer gas (D) Bagasse
Last Answer : (C) Producer gas
Description : Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil
Last Answer : (A) Gasoline
Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene
Last Answer : (C) Fuel oil
Description : Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil
Last Answer : (D) Fuel oil
Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil
Last Answer : (D) Heavy fuel oil
Description : Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene
Last Answer : (D) Kerosene
Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas
Last Answer : (B) Pulverised coking coal
Description : Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)
Last Answer : (D) Lump coal (fixed on chain grate)
Description : Which of the following has the highest gross calorific value? (A) Blast furnace gas (B) Coke oven gas (C) Carburetted water gas (D) Oil refinery gas
Last Answer : (D) Oil refinery gas
Description : Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline
Last Answer : ANSWER : D
Description : Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil
Last Answer : ANSWER c. gasoline
Description : Which of the following is the lightest and most volatile liquid fuel? A.Gasoline B.Kerosene C.Fuel oil
Last Answer : Answer: A
Description : Which of the following has the highest flash point of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oi
Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil
Last Answer : (B) Sand
Description : LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%) (D) All (A), (B) and (C)
Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point
Last Answer : (C) Aniline point
Description : Tar is a better fuel than furnace oil, because of its (A) Higher calorific value (B) Lower sulphur content (C) Higher emissivity (0.8-0.9) resulting in higher radiation heat transfer rate (D) Both (A) and (B)
Last Answer : (D) Both (A) and (B)
Description : Out of the following fuels, the difference between the net and gross calorific value is maximum in case of (A) Pitch (B) Fuel oil (C) Blast furnace gas (D) Bituminous coal
Last Answer : (B) Fuel oil
Description : Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)
Description : During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these
Last Answer : (A) Density
Description : Which will have the least volatile matter and hence will be the most difficult to ignite? (A) Bituminous coal (B) Coke (C) Semi-bituminous coal (D) Anthracite
Last Answer : (B) Coke
Description : During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)
Description : Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash ... ash and 25% volatile matter (D) Semi-bituminous coal containing 25% ash and 20% volatile matter
Last Answer : (A) Coke breeze containing 25% ash and 2% volatile matter
Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The heat treatment cycle is as follows; Increase temperature from 30 OC to 850 OC in 3 hours. ... efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50
Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30) = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8
Description : Which among the following has the highest flue gas loss on combustion due to Hydrogen in the fuel? a) natural gas b) furnace oil c) coal d) light diesel oil
Last Answer : a) natural gas
Description : The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene
Description : __________ is used as jet engine fuel. (A) Petrol (B) Diesel (C) Kerosene (D) LPG
Last Answer : (C) Kerosene
Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore
Last Answer : (C) Manufacture of carbon electrode
Description : Which furnace employs natural draft? (A) Coke oven (B) Boiler (C) Rotary kilns (D) L.D. converter
Last Answer : (A) Coke oven
Description : Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)
Description : Which is a continuous furnace? (A) Coke ovens (B) Annealing furnace (C) Glass tank furnace
Last Answer : (C) Glass tank furnace