Description : The bond angle between carbon atoms in cyclohexane is (a) 60° (b) 90° (c) 109.5° (d) 120°
Last Answer : 109.5°
Description : Which of the following statements about ethene, C2H4, is incorrect? (a) The H–C–H bond angles are approximately 109.5°. (b) There is a total of five sigma bonds. (c) The carbon atoms are sp2 hybridized. (d) The H–C–H bond angles are approximately 120°.
Last Answer : The H–C–H bond angles are approximately 109.5°.
Description : Which of the following is closest to the C–O–C bond angle in CH3–O–CH3? (a) 180° (b) 120° (c) 109.5° (d) 90°
Description : What is the predicted shape, bond angle, and hybridization for CH3+? (a) trigonal planar, 120°, sp2 (b) trigonal planar, 120°, sp3 (c) trigonal planar, 109.5°, sp2 (d) trigonal pyramidal, 120°, sp2
Last Answer : trigonal planar, 120°, sp2
Description : What is bond angle between the hybrid orbitals in methane? (a) 180° (b) 120° (c) 109.5° (d) 115.5°
Description : The H–C–H bond angle in ethylene is (a) 60° (b) 120° (c) 90° (d) 180°
Last Answer : 120°
Description : Which of the following statements is not true about propyne, HC–C≡CH3? (a) It contains six sigma bonds. (b) It contains three pi bonds. (c) The H–C–H bond angle is about 109.5°. (d) The C–C–C bond angle is 180°.
Last Answer : It contains three pi bonds
Description : The bond angle between carbon atoms in cyclohexane is (a) 109°28' (b) 60° (c) 90° (d) 120°
Last Answer : 109°28'
Description : Triethylamine [(CH3CH2)3N] is a molecule in which the nitrogen atom is __________ hybridized and the CNC bond angle is __________. (a) sp2; >109.5° (b) sp2; 109.5° (d) sp3;
Last Answer : sp3;
Description : Which of following statements is false about propane? (a) all bond angles are 109.5° (b) each carbon is sp3 hybridized (c) the compound is combustible (d) the compound undergoes polymerization to give polypropylene.
Last Answer : the compound undergoes polymerization to give polypropylene.
Description : What will be the phase angle relationship of a six-pole, three-phase, rotating field generator? A. 60° B. 120° C. 180° D. 360°
Last Answer : Answer: B
Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°
Last Answer : (A) 40° and 140
Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°
Last Answer : D
Description : ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°
Last Answer : (C) 210°
Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°
Last Answer : (A) 45°
Description : What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°
Last Answer : (C) 90°
Description : Explain why the water molecule has a bent shape and a bond angle less than 109.5° The electron repulsion between the two lone pairs of electrons on the oxygen of water causes the O–H bonds to squeeze close together
Last Answer : The electron repulsion between the two lone pairs of electrons on the oxygen of water causes the O–H bonds to squeeze close together
Description : If whole circle bearing of a line is 120°, its reduced bearing is (A) S 20° E (B) S 60° E (C) N 120° E (D) N 60° E
Last Answer : (B) S 60° E
Description : For a parallel load on a fillet weld of equal legs, the plane of maximum shear occurs at (a) 22.5° (b) 30° (c) 45° (d) 60°
Last Answer : (c) 45°
Description : In water molecule the bond angle decreases from 109.28 to 104.5, why this does happens ?
Last Answer : The repulsion between lone pair and lone pair electrons In NH3 molecule, the bond angle decreases from 109.28 to 107.3 why does it happen. The more repulsion between lone pair and bond pair
Description : Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°. (b) It is immiscible with water forming the lower layer. (c) It can be ... Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene.
Last Answer : It is immiscible with water forming the lower layer
Description : Which statement about the carbonyl group is NOT true? (a) The carbonyl carbon is sp2 hybridized. (b) The bond angles among the three atoms attached to the carbonyl carbon are 120°. (c) ... attached to the carbonyl carbon form a nonplanar geometry. (d) The carbonyl group forms resonance structures.
Last Answer : The three atoms attached to the carbonyl carbon form a nonplanar geometry
Description : The bond angles associated with the hybrid orbitals of a carbon involved in a triple bond is (a) 180° (b) 120° (c) 109° (d) 45
Last Answer : 180
Description : The C–C bond length in benzene is (a) greater than the C–C bond length in ethane. (b) shorter than the C–C bond length in ethylene. (c) Same as that of C–C bond length in ethylene
Last Answer : intermediate between C–C bond length in ethane and C–C bond length in ethylene
Description : Which of the following statements about benzene is correct? (a) All of the carbon atoms are sp3 hybridized. (b) It has no delocalized electrons. (c) The carbon-carbon bond length is longer than that of ethane. (d) It is a planar molecule.
Last Answer : It is a planar molecule.
Description : The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is A. 20 cm B. 25 cm C. 40 cm D. 50 cm
Last Answer : ANS: D
Description : In case of partial bearing, the angle of contact of the bushing with the journal is usually (A) 120° (B) 180° (C) 45° (D) 360°
Last Answer : (A) 120°
Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°
Last Answer : (D) 120°
Description : If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be (A) Equal to X (B) More than X (C) Less than X (D) Any of the above
Last Answer : (C) Less than X
Description : A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms
Last Answer : B. 275 ms
Description : Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°
Last Answer : (B) 2 to 5°
Description : Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the ... Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials
Last Answer : (C) Heavy tonnages of rocks or gravel
Description : In standard taper roller bearings, the angle of taper of the outer raceway is (a) 5° (b) 8° (c) 15° (d) 25°
Last Answer : (d) 25°
Description : The helix angle in case of closely coiled helical spring is (A) less than 5° (B) 5° to 7° (C) 7° to 10° (D) more than 10°
Last Answer : (D) more than 10°
Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17
Last Answer : (C) 12°
Description : The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45
Last Answer : Answer: Option B
Description : Pick up the correct statement from the following: (A) The minimum frequency of light for which no electrons are emitted, is called threshold frequency (B) Polarising angle of glass is 57.5° (C) At the polarising angle, the reflected and refracted rays are orthogonal (D) All the above
Last Answer : Answer: Option D
Description : If the ailerons are deflected to 10°, compared to 5°, this will cause: a. An increased angle of bank b. An increased rate of roll c. No change to either bank angle or roll rate d. A reduction in the adverse yawing moment
Last Answer : b. An increased rate of roll
Description : The carbon -carbon bond length is shortest in (a) Ethane (b) Ethylene (c) Benzene (d) Acetylene
Last Answer : Ans:(d)
Description : sp3 Why is the angle between hybrid orbitals 109 degrees 26 ' ?
Last Answer : : A s orbital and three p orbitals of the conjugate layer overlap and form a sp3 hybrid orbital. The balanced sp3 orbital is directed along the four angles of any regular tetrahedron. And between the orbitals the angle 109 ৮ 26 ' is present and the structure is quadratic.
Description : What is the area of a quadrilateral in which angle 109 degrees is between sides 0.38cm and 0.69cm when adjacent angle 123 degrees is between sides 0.38cm and 0.42cm?
Last Answer : Here's how I solve it using the Sine and Cosine rules, and area of a triangle based on sine of angle between two given lengths:Let the quadrilateral be ABCD with ADC = 109°, DCB = 128°, ... the area of the 4 sided quadrilateral works out as 0.305 square cm rounded to three decimal places.
Description : The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?
Last Answer : Area = (L1 L2) sin(angle) , where L1, L2 and and angle are functions of time t. Take the derivative using the multiplication rule. The derivative will equal (L1L2)(derivative of sin) + sin times ... will have to use the multiplication rule a second time to get the derivative of L1 L2. Good luck.
Description : The angle between two altitudes of a parallelogram through the vertex of an obtuse angle of the parallelogram is 60°. -Maths 9th
Last Answer : Let the parallelogram be ABCD, in which ∠ADC and ∠ABC are obtuse angles. Now, DE and DF are two altitudes of parallelogram and angle between them is 60°.
Description : The adjacent sides of a parallelogram are 2a and a. If the angle between them is 60°, then one of the diagonals of the parallelogram is -Maths 9th
Last Answer : answer:
Description : A force of 10 N displaces a body by a distance of 3 m at an angle 60° to its own direction. Find the amount of work done. -Physics 9th
Last Answer : F=10N,S=2m,θ=600 So, Work=F×Scosθ=10×2cos600 =10×2×21=10J
Description : what- Based on the given information, which conjecture is invalidGiven: An angle in a linear pair has one angle that measures 60°.?
Last Answer : The measure of the other angle is also 60°.
Description : which figure is a counterexample to the following conditional statementIf a triangle has an angle that measures 60°, then it is equilateral.?
Last Answer : A+
Description : On an open ground, a biker follows a track that turns to his left by an angle of 60° after every 600 m. Starting from a given turn
Last Answer : On an open ground, a biker follows a track that turns to his left by an angle of 60° after ... total path length covered by the motorist in each case.
Description : A man applies a force of 10 N on a garbage crate. If another man applies a force of 8 N on the same crate at an angle of 60° with respect
Last Answer : A man applies a force of 10 N on a garbage crate. If another man applies a force of 8 N ... force and direction of the crate, if crate is stationary.