Tabling process used for separating two materials of different densities by passing the dilute pulp over a table/deck, which is inclined from the horizontal surface at an angle of about (A) 1 to 2° (B) 2 to 5° (C) 5 to 10° (D) 10 to 15°

Tabling process used for separating two materials of different densities
by passing the dilute pulp over a table/deck, which is inclined from the
horizontal surface at an angle of about
(A) 1 to 2°
(B) 2 to 5°
(C) 5 to 10°
(D) 10 to 15°
by

1 Answer

Answer :

(B) 2 to 5°
by

Related questions

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the screening of the (A) Light metal powder down upto 4 mesh size (B) Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Description : Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the ... Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Last Answer : (C) Heavy tonnages of rocks or gravel

If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Description : If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Last Answer : Answer: Option D

The helix angle in case of closely coiled helical spring is (A) less than 10° (B) 10° to 15° (C) 15° to 20° (D) more than 20°

Description : The helix angle in case of closely coiled helical spring is (A) less than 10° (B) 10° to 15° (C) 15° to 20° (D) more than 20°

Last Answer : (A) less than 10°

Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°

Description : Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°

Last Answer : (D) 45°

In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°

Description : In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°

Last Answer : Answer: Option B

The tilt angle varies form…° to….. °. For a good plough a. 20°,30°. c) 15°,30° b. 10°,30°. d) 15°,25°

Description : The tilt angle varies form…° to….. °. For a good plough a. 20°,30°. c) 15°,30° b. 10°,30°. d) 15°,25°

Last Answer : 15°,25°

The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°

Description : The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°

Last Answer : 42°-45°

In standard taper roller bearings, the angle of taper of the outer raceway is (a) 5° (b) 8° (c) 15° (d) 25°

Description : In standard taper roller bearings, the angle of taper of the outer raceway is (a) 5° (b) 8° (c) 15° (d) 25°

Last Answer : (d) 25°

The helix angle in case of closely coiled helical spring is (A) less than 5° (B) 5° to 7° (C) 7° to 10° (D) more than 10°

Description : The helix angle in case of closely coiled helical spring is (A) less than 5° (B) 5° to 7° (C) 7° to 10° (D) more than 10°

Last Answer : (D) more than 10°

If the ailerons are deflected to 10°, compared to 5°, this will cause: a. An increased angle of bank b. An increased rate of roll c. No change to either bank angle or roll rate d. A reduction in the adverse yawing moment

Description : If the ailerons are deflected to 10°, compared to 5°, this will cause: a. An increased angle of bank b. An increased rate of roll c. No change to either bank angle or roll rate d. A reduction in the adverse yawing moment

Last Answer : b. An increased rate of roll

For clear distinct vision, images of obstructions should fall on the retina with a cone of (A) 2° (B) 3° (C) 4° (D) 5°

Description : For clear distinct vision, images of obstructions should fall on the retina with a cone of (A) 2° (B) 3° (C) 4° (D) 5°

Last Answer : Answer: Option D

The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Description : The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Last Answer : b. 2°/min

The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Description : The magnetic heading reference unit has a precision rate of: a. 1°/min b. 2°/min c. 5°/min d. 3°/min

Last Answer : b. 2°/min

During a straight departure, the initial track is to be: a. Within 5° of runway centre-line b. Within 10 of runway centre-line c. Within 15° of runway centre-line d. Within 25° of runway centre-line

Description : During a straight departure, the initial track is to be: a. Within 5° of runway centre-line b. Within 10 of runway centre-line c. Within 15° of runway centre-line d. Within 25° of runway centre-line

Last Answer : c. Within 15° of runway centre-line

During a straight departure, the initial track is to be: a. Within 5° of runway centre-line b. Within 10 of runway centre-line c. Within 15° of runway centre-line d. Within 25° of runway centre-line

Description : During a straight departure, the initial track is to be: a. Within 5° of runway centre-line b. Within 10 of runway centre-line c. Within 15° of runway centre-line d. Within 25° of runway centre-line

Last Answer : c. Within 15° of runway centre-line

The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Last Answer : (2) 45° with horizontal Explanation: This has to do with the equation of a parabola or trajectory which is z = (tane)x 2 cos 9) 2. We can see that if the ball is fired at a 45 degree angle from the ground, the horizontal distance will be a maximum.

The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Last Answer : 45° with horizontal 

The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Description : The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Last Answer : d. Angle of repose

A particle is projected with speed v at angle θ to the horizontal on an inclined surface making an angle Φ (Φ < θ) to the horizontal.

Description : A particle is projected with speed v at angle θ to the horizontal on an inclined surface making an angle Φ (Φ < θ) to the horizontal.

Last Answer : A particle is projected with speed v at angle θ to the horizontal on an inclined surface ... range of the projectile along the inclined surface.

An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Description : An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Last Answer : Answer: Option C

Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50

Description : Improved uniformity is obtained if seed tube is inclined rear ward at _________ with vertical. a)5-15° b)15-30° c)30-40° d)40-50

Last Answer : b)15-30°

If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on (A) Staff normal (B) Staff vertical (C) Staff normal as well as vertical (D) None of these

Description : If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on (A) Staff normal (B) Staff vertical (C) Staff normal as well as vertical (D) None of these

Last Answer : (A) Staff normal

Which form of e‐marketplace brings together buyers and sellers from multiple industries, often for MRO materials? a. horizontal b. Vertical c. Integrated d. Inclined

Description : Which form of e‐marketplace brings together buyers and sellers from multiple industries, often for MRO materials? a. horizontal b. Vertical c. Integrated d. Inclined

Last Answer : a. horizontal

The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Description : The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Last Answer : (B) Telescopic alidade

The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above

Description : The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above

Last Answer : a. More than 50 kgm

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Description : A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Last Answer : c. W/2

The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of (A) Friction (B) Limiting friction (C) Repose (D) Kinematic friction

Description : The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of (A) Friction (B) Limiting friction (C) Repose (D) Kinematic friction

Last Answer : (C) Repose

A plane inclined at an angle to the horizontal at which the soil is expected to stay in the absence of any lateral support, is known as (A) Natural slope line (B) Repose line (C) The line (D) All the above

Description : A plane inclined at an angle to the horizontal at which the soil is expected to stay in the absence of any lateral support, is known as (A) Natural slope line (B) Repose line (C) The line (D) All the above

Last Answer : Answer: Option D

The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Description : The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Last Answer : Answer: Option A

If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'

Description : If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'

Last Answer : Answer: Option C

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Description : When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Last Answer : reflection

A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°

Description : A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°

Last Answer : Ans :a

In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Description : In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Last Answer : Answer: Option C

Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

If the angle of incidence formed on a concave mirror at a point is 30° then the angle of reflection will be: (1) 15° (2) 30° (3) 60° (4) 90°

Description : If the angle of incidence formed on a concave mirror at a point is 30° then the angle of reflection will be: (1) 15° (2) 30° (3) 60° (4) 90°

Last Answer : (2) 30° Explanation: The angle between the incident ray and the normal is known as the angle of inci dence. The angle between the reflected ray and the normal is known as the angle of reflection.

Two bodies of mass 6 kg and 9 kg are connected with a light inextensile string passing over a smooth pulley with one of the bodies on a smooth inclined plane (θ = 30°) and the other hanging freely from the other end. Show that the time taken by 9 kg to pull 6 kg up the entire length is half the time taken by 6 kg to pull 9 kg over the same plane.

Description : Two bodies of mass 6 kg and 9 kg are connected with a light inextensile string passing over a smooth pulley with one of the bodies on a smooth inclined plane (θ = 30°) and the other hanging freely from the ... kg up the entire length is half the time taken by 6 kg to pull 9 kg over the same plane.

Last Answer : Given: Mass of body A (mA) = 6 kg Mass of body B (mB) = 9 kg Angle of inclination of the plane (θ) = 30° Let's assume that the acceleration of body A (aA) and body B (aB) are in opposite ... we know that the time taken (t) is given by the formula: t = √(2d/a), where d is the distance travelled

A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Description : A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Last Answer : B. 275 ms

A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock

Description : A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock

Last Answer : (D) 10° with the face of the dock

In flat roof of reinforced cement concrete, the recommended angle of slope, is (A) Zero (B) A few degrees (C) 10° (D) 200

Description : In flat roof of reinforced cement concrete, the recommended angle of slope, is (A) Zero (B) A few degrees (C) 10° (D) 200

Last Answer : Answer: Option B

A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°

Description : A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°

Last Answer : Ans. D Given m = 3, Nr = 12 Step angle = 360 / m x Nr = 360 /3 x 12 = 10°

If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the(A) Sedimentation(B) Flocculation(C) Dispersion(D) Centrifugation

Description : If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the (A) Sedimentation (B) Flocculation (C) Dispersion (D) Centrifugation

Last Answer : (D) Centrifugation