If whole circle bearing of a line is 120°, its reduced bearing is (A) S 20° E (B) S 60° E (C) N 120° E (D) N 60° E

If whole circle bearing of a line is 120°, its reduced bearing is 

(A) S 20° E

(B) S 60° E

(C) N 120° E

(D) N 60° E

by

1 Answer

Answer :

(B) S 60° E

by

Related questions

The whole circle bearing of a line is 290°. Its reduced bearing is (A) N 20° E (B) N 20° W (C) N 70° W (D) S 70° E

Description : The whole circle bearing of a line is 290°. Its reduced bearing is  (A) N 20° E (B) N 20° W (C) N 70° W (D) S 70° E

Last Answer : (C) N 70° W

At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Last Answer : (A) 40° and 140

ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°

Description : ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°

Last Answer : (C) 210°

If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Description : If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Last Answer : (C) S

If the whole circle bearing of a line is 270°, its reduced bearing is (A) N 90° W (B) S 90° W (C) W 90° (D) 90° W

Description : If the whole circle bearing of a line is 270°, its reduced bearing is (A) N 90° W (B) S 90° W (C) W 90° (D) 90° W

Last Answer : (C) W 90°

The reduced bearing of a line is N 87° W. Its whole circle bearing is (A) 87° (B) 273° (C) 93° (D) 3°

Description : The reduced bearing of a line is N 87° W. Its whole circle bearing is (A) 87° (B) 273° (C) 93° (D) 3°

Last Answer : (B) 273°

A well conditioned triangle has no angle less than (A) 20° (B) 30° (C) 45° (D) 60°

Description : A well conditioned triangle has no angle less than  (A) 20°  (B) 30°  (C) 45°  (D) 60°

Last Answer : (B) 30° 

The angle between two plane mirrors of optical square, is (A) 20° (B) 30° (C) 45° (D) 60°

Description : The angle between two plane mirrors of optical square, is  (A) 20°  (B) 30°  (C) 45°  (D) 60° 

Last Answer : (C) 45° 

The angle between the index glass and the horizon glass of a box sextant is 40°; the horizontal angle between the two points sighted by the instruments is : (a) 20° (b) 60° (c) 40° (d) 80°

Description : The angle between the index glass and the horizon glass of a box sextant is 40°; the horizontal angle between the two points sighted by the instruments is : (a) 20° (b) 60° (c) 40° (d) 80°

Last Answer : (a) 20°

A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Last Answer : (A) 45°

If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : D

The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is (A) 50 m (B) 50 m (C) 25 m (D) 25 m

Description : The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is (A) 50 m (B) 50 m (C) 25 m (D) 25 m

Last Answer : (D) 25 m

Bence-Jones protein precipitates at (A) 20°–40° C (B) 40–-60° C (C) 60°–80° C (D) 80°–100° C

Description : Bence-Jones protein precipitates at (A) 20°–40° C (B) 40–-60° C (C) 60°–80° C (D) 80°–100° C

Last Answer : B

The temperature at which both the Fahrenheit and Centigrade scales have the same value is – (1) -60° (2) -40° (3) -20° (4) 0°

Description : The temperature at which both the Fahrenheit and Centigrade scales have the same value is – (1) -60° (2) -40° (3) -20° (4) 0°

Last Answer : (2) -40° Explanation: The temperature when both the Celsius and Fahrenheit scales are the same is -40 degrees.

What will be the phase angle relationship of a six-pole, three-phase, rotating field generator? A. 60° B. 120° C. 180° D. 360°

Description : What will be the phase angle relationship of a six-pole, three-phase, rotating field generator? A. 60° B. 120° C. 180° D. 360°

Last Answer : Answer: B

The bond angle between carbon atoms in cyclohexane is (a) 60° (b) 90° (c) 109.5° (d) 120°

Description : The bond angle between carbon atoms in cyclohexane is (a) 60° (b) 90° (c) 109.5° (d) 120°

Last Answer : 109.5°

The bond angle between carbon atoms in cyclohexane is (a) 109°28' (b) 60° (c) 90° (d) 120°

Description : The bond angle between carbon atoms in cyclohexane is (a) 109°28' (b) 60° (c) 90° (d) 120°

Last Answer : 109°28'

The H–C–H bond angle in ethylene is (a) 60° (b) 120° (c) 90° (d) 180°

Description : The H–C–H bond angle in ethylene is (a) 60° (b) 120° (c) 90° (d) 180°

Last Answer : 120°

The H–C–C bond angle in ethane is (a) 60° (b) 109.5° (c) 120° (d) 118°28′

Description : The H–C–C bond angle in ethane is (a) 60° (b) 109.5° (c) 120° (d) 118°28′

Last Answer : 109.5°

What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°

Description : What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : (C) 90°

Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Description : Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Last Answer : (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Define- 1. Whole circle bearing 2. Reduced bearing 3. Fore bearing 4. Back bearing

Description : Define- 1. Whole circle bearing 2. Reduced bearing 3. Fore bearing 4. Back bearing

Last Answer : 1.Whole circle bearing-  The bearing measures only in the clockwise direction from meridian or north direction is known as whole circle bearing. 2.Reduced bearing  The bearing measures with ... bearing  The bearing observed in the direction of opposite of survey is called fore bearing. 

Differentiate between reduced bearing and whole circle bearing

Description : Differentiate between reduced bearing and whole circle bearing

Last Answer : Quadrantal Bearing/Reduced Bearing Whole Circle Bearing The horizontal angle made by a line with the magnetic north or south (whichever is closer from the line) in the eastward or westward direction ... from 0° to 90°  The value of the whole circle bearing varies from 0° to 360° 

Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle (C) Sign of the correction of magnetic declination is different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Description : Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle ... different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Last Answer : (B) Bearing is completely specified by an angle

The R.L. of ground water table on the sides of a valley is 1505 m whereas R.L. of the stream water is 1475 m. If 60° slope consists of pervious soil between R.L. 1485 m to 1500 m, the gravity spring may be expected at the point of reduced level (A) 1500 m (B) 1505 m (C) 1475 m (D) 1485 m

Description : The R.L. of ground water table on the sides of a valley is 1505 m whereas R.L. of the stream water  is 1475 m. If 60° slope consists of pervious soil between R.L. 1485 m to 1500 m, the gravity spring  may ... of reduced level  (A) 1500 m  (B) 1505 m  (C) 1475 m  (D) 1485 m 

Last Answer : (D) 1485 m 

In case of partial bearing, the angle of contact of the bushing with the journal is usually (A) 120° (B) 180° (C) 45° (D) 360°

Description : In case of partial bearing, the angle of contact of the bushing with the journal is usually (A) 120° (B) 180° (C) 45° (D) 360°

Last Answer : (A) 120°

Complete the chain: Tropical Rainforest, Tropical Deciduous, 20° to 30° N and S, Savannah Grassland

Description : Complete the chain: Tropical Rainforest, Tropical Deciduous, 20° to 30° N and S, Savannah Grassland

Last Answer : Complete the chain: A B C (1) Tropical Rainforest (1) 10° to 20° N and S (1) Khejari, ... 5° to 30° N and S (4) Mahogany, ebony, rosewood

In quadrantal bearing system, back bearing of a line may be obtained from its forward bearing, by (A) Adding 180°, if the given bearing is less than 180° (B) Subtracting 180°, if the given bearing, is more than 180° (C) Changing the cardinal points, i.e. substituting N for S and E for W and vice-versa (D) None of these

Description : In quadrantal bearing system, back bearing of a line may be obtained from its forward bearing, by (A) Adding 180°, if the given bearing is less than 180° (B) Subtracting 180°, if the given bearing, is more ... cardinal points, i.e. substituting N for S and E for W and vice-versa (D) None of these

Last Answer : (C) Changing the cardinal points, i.e. substituting N for S and E for W and vice-versa

A bearing of a line is also known as (A) Magnetic bearing (B) True bearing (C) Azimuth (D) Reduced bearing

Description : A bearing of a line is also known as  (A) Magnetic bearing  (B) True bearing  (C) Azimuth  (D) Reduced bearing 

Last Answer : (B) True bearing

If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be (A) +50 m, +86.6 m (B) +86.6 m, -50 m (C) +50 m, -86.6 m (D) +70.7 m, -50 m

Description : If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be (A) +50 m, +86.6 m (B) +86.6 m, -50 m (C) +50 m, -86.6 m (D) +70.7 m, -50 m

Last Answer : (B) +86.6 m, -50 m

In case of full journal bearing, the angle of contact of the bushing with the journal is (A) 60° (B) 90° (C) 180° (D) 360°

Description : In case of full journal bearing, the angle of contact of the bushing with the journal is (A) 60° (B) 90° (C) 180° (D) 360°

Last Answer : (D) 360°

Which one of the following is called as "Roaring Forty"? (1) Winds blowing in southern hemisphere between 40°-60° S (2) Winds blowing in northern hemisphere between 40°-60° N (3) Very cold winds which blow in winters (4) Very hot and fast blowing summer winds

Description : Which one of the following is called as "Roaring Forty"? (1) Winds blowing in southern hemisphere between 40°-60° S (2) Winds blowing in northern hemisphere between 40°-60° N (3) Very cold winds which blow in winters (4) Very hot and fast blowing summer winds

Last Answer : (1) Winds blowing in southern hemisphere between 40°-60° S Explanation: The Roaring Forties is the name given to strong westerly winds found in the Southern Hemisphere, generally between the latitudes of ... South Pole and the Earth's rotation, and there are few landmasses to serve as windbreaks.

The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Description : The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Last Answer : Answer: Option B

The density of water is 1000 kg/m3 at (A) 0° C (B) 0° K (C) 4° C (D) 20° C

Description : The density of water is 1000 kg/m3 at (A) 0° C (B) 0° K (C) 4° C (D) 20° C

Last Answer : Answer: Option C

In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°

Description : In a right angle bend of a road provided with a transition throughout, the maximum polar angle will be (A) 10° (B) 15° (C) 20° (D) 30°

Last Answer : Answer: Option B

If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Description : If a Lemniscate curve of transition throughout is introduced to connect two parallel roads, the maximum polar angle of the curve, is (A) 10° (B) 15° (C) 20° (D) 30°

Last Answer : Answer: Option D

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°

Description : The angle of intersection of a contour and a ridge line, is  (A) 30°  (B) 45°  (C) 60°  (D) 90° 

Last Answer : (D) 90° 

The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these

Description : The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these

Last Answer : Answer: Option B

A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°

Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium  the angle between the inclined bars must be  (A) 3°  (B) 45°  (C) 90°  (D) 120° 

Last Answer : (D) 120° 

The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Description : The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Last Answer : (A) Secant of its reduced bearing

If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be (A) Equal to X (B) More than X (C) Less than X (D) Any of the above

Description : If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be (A) Equal to X (B) More than X (C) Less than X (D) Any of the above

Last Answer : (C) Less than X

A force of 10 N displaces a body by a distance of 3 m at an angle 60° to its own direction. Find the amount of work done. -Physics 9th

Description : A force of 10 N displaces a body by a distance of 3 m at an angle 60° to its own direction. Find the amount of work done. -Physics 9th

Last Answer : F=10N,S=2m,θ=600 So, Work=F×Scosθ=10×2cos600 =10×2×21​=10J

A man applies a force of 10 N on a garbage crate. If another man applies a force of 8 N on the same crate at an angle of 60° with respect

Description : A man applies a force of 10 N on a garbage crate. If another man applies a force of 8 N on the same crate at an angle of 60° with respect

Last Answer : A man applies a force of 10 N on a garbage crate. If another man applies a force of 8 N ... force and direction of the crate, if crate is stationary.

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Last Answer : (C) 45°

Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane (C) Its graduations are in whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Description : Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane ( ... whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Last Answer : (D) It is provided with a prism to facilitate reading of its graduated circle

The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Last Answer : (B) 45°

In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Description : In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Last Answer : Answer: Option A

For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Description : For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Last Answer : Answer: Option A

The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Description : The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Last Answer : Answer: Option D