In the production of soda ash by Solvay process, the by-product is
(A) CaCl2
(B) NH4Cl
(C) NH3
(D) NaOH

1 Answer

Answer :

(A) CaCl2

Related questions

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Description : In the Solvay process, the product from the calciner is (A) Light soda ash (B) Dense soda ash (C) Sodium bicarbonate (D) Dehydrated soda ash

Last Answer : (A) Light soda ash

Description : Which of the following may be viewed as a catalyst in the manufacturesoda ash by Solvay process? (A) NH3 (B) NaCl (C) CaO (D) Coke

Last Answer : (A) NH3

Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel

Last Answer : (A) Cast iron

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

Description : Which of the following is not required in the manufacture of soda ash by Solvay process? (A) Ammonia (B) Limestone (C) Nitric acid (D) None of these

Last Answer : (C) Nitric acid

Description : Solvay process is used for the manufacture of (A) Caustic soda (B) Soda ash (C) Caustic potash (D) Soda lime

Last Answer : (B) Soda ash

Description : _________ process is used for producing soda ash. (A) Chamber (B) Chance (C) Tromp (D) Solvay

Last Answer : (D) Solvay

Description : Raw materials required for the production of CAN (Calcium ammonium nitrate) is NH3 (A) HNO3 & limestone (B) CO2 & H2SO4 (C) HNO3 & NH4Cl (D) CO2 & KNO3

Last Answer : (A) HNO3 & limestone

Description : Impurities present in brine is normally removed by treatment with (A) NH3 and CO2 (B) Lime and soda ash (C) Lime, ammonia and carbon (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : In an integrated steel plant, NH3 present in coke oven gas is normallyrecovered as (A) (NH4 )2SO4 (B) NH4Cl (C) (NH4 )2 NO3 (D) Liquid NH3

Last Answer : (A) (NH4 )2SO4

Description : Which of the following pairs of compounds could NOT be used to create a buffer solution? Would it be: w) HCL and NaCl (read: H - C - L and N - A - C - L) x) HCN and NaCN (read: H - C - N and N - A - C - N) y) NH3 ... - H - 4 - C - L) z) HNO2 and NaNO2 (read: H - N - O -2 and N - A - N - O - 2)

Last Answer : ANSWER: W -- HCL AND NaCl (read: H - C - L and N - A - C - L) 

Description : The common name for the com-pound having formal NaOH is – (1) Caustic soda (2) Caustic potash (3) Soda ash (4) Sodium hydroxide

Last Answer : (1) Caustic soda Explanation: Sodium hydroxide, also known as lye or caustic soda, has the molecular formula NaOH and is a highly caustic metallic base. It is a white solid available in pellets ... manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner.

Description : The common name for the compound having formal NaOH is (1) Caustic soda (2) Caustic potash (3) Soda ash (4) Sodium hydroxide

Last Answer : Caustic soda

Description : __________ process is used for the manufacture of sodium carbonate by ammonia soda process. (A) Ostwald's (B) Bosch (C) Solvay (D) Haber's

Last Answer : (C) Solvay

Description : What are the raw material used for the manufacture of washing soda by solvay process ?

Last Answer : Ans. Nacl, CaCO3 and NH3

Description : Name the process by which washing soda is prepared. (a)Solvay process (b) ammonium soda process (c) Both (a) and (b) (d)none of above

Last Answer : (c) Both (a) and (b)

Description : How is Sodium Carbonate (Washing Soda), Na2CO3·10H2O manufactured by “Solvay Process” 

Last Answer : Principle-- In this process, advantage is taken of the low solubility of sodium hydrogencarbonate whereby it gets precipitated in the reaction of sodium chloride with ammonium hydrogencarbonate. The latter is prepared ... treated with Ca(OH)2. Calcium chloride is obtained as a by-product. 

Description : In the Bayer's process, bauxite is digested under pressure using (A) H2SO4 (B) NaOH (C) NH3 (D) HCl

Last Answer : (B) NaOH

Description : Explain Ammonia recovery in Solvey’s process for the production of Soda ash. 

Last Answer : Ammonia Recovery in Solvey's process  CaO is formed as a by-product of the thermal decomposition of limestone in the lime kiln. This CaO enters a lime slaker to react with water to form calcium hydroxide ... 2H2O(l) + 2NH3(g) The ammonia is recycled back into the process to form ammoniated brine.

Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Last Answer : (B) Sand

Description : __________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia. (A) Solvay (B) Ostwald's (C) Haber's (D) None of these

Last Answer : (B) Ostwald's

Description : Fertiliser produced during soda ash manufacture by dual process is ammonium (A) Chloride (B) Sulphate (C) Nitrate (D) None of these

Last Answer : (A) Chloride

Description : Le-Blanc process is a primitive process for the manufacture of (A) Caustic soda (B) Soda ash (C) Bromine from sea water (D) Hydrochloric acid

Last Answer : (B) Soda ash

Description : Draw process flow diagram of manufacturing of soda ash. 

Last Answer : PFD for manufacturing of Soda Ash  

Description : Mercury cells for caustic soda manufacture, compared to diaphragm cells (A) Require lower initial investment (B) Require more power (C) Produce lower concentration NaOH (D) None of these

Last Answer : (D) None of these

Description : Which of the following solvents is used for the extraction of H3PO4 from CaCl2 solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching? (A) Isopropyl alcohol (B) Butyl alcohol (C) Toluene (D) Hexane

Last Answer : (B) Butyl alcohol

Description : The doctor's solution comprises of sodium plumbite in (A) Alcohol (B) Water (C) Aqueous caustic soda (D) Soda ash

Last Answer : (C) Aqueous caustic soda

Description : Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Last Answer : (B) Baffle

Description : Reaction of ortho-phosphoric acid with soda ash produces (A) Sodium Tributyl phosphate (STPP) (B) Tricresyl phosphate (C) Tributyl phosphate (D) Nitrophosphate

Last Answer : (A) Sodium Tributyl phosphate (STPP)

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

Description : Sodium carbonate (soda ash) is not used in the manufacture of (A) Fire extinguishers (B) Sugar (C) Baking powder (D) Detergents

Last Answer : (D) Detergents

Description : . Chemical name of soda ash is (A) Sodium bicarbonate (B) Sodium thiosulphate (C) Potassium carbonate (D) None of these

Last Answer : (D) None of these

Description : In primitive days, __________ was being manufactured by Leblanc Process. (A) Alum (B) Washing soda (C) Soda ash (D) Calcium carbide

Last Answer : (C) Soda ash

Description : Dense soda ash used in the manufacture of glass, is chemically represented by (A) Na2CO3 (B) Na2CO3 .10H2O (C) Na2CO3 .H2O (D) Na2HCO3

Last Answer : (C) Na2CO3 .H2O

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Description : Lime and soda ash are added to water to remove (A) Bicarbonates & sulphates of calcium and magnesium (B) Undesirable taste and odour (C) Bacteria (D) Its corrosiveness

Last Answer : (A) Bicarbonates & sulphates of calcium and magnesium

Description : Permanent hardness of water can be removed by (A) Addition of soda ash to it (B) Treating it with zeolites (C) Passing it through sodium hexametaphosphate (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Description : Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Last Answer : (B) Soda ash

Description : (A) Washing soda (B) Soda ash (C) Slaked lime (D) Quicklime

Last Answer : (A) Washing soda

Description : Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha

Last Answer : (A) Semet-Solvay process

Description : Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Last Answer : (C) Is soluble in ammonium chloride and potassium chloride solution

Description : Economics of 'Solvay Process' depends upon the efficiency of (A) Carbonating tower (B) Ammonia recovery (C) Ammonia recovery and size of the plant (D) Ammoniation of salt solution

Last Answer : (C) Ammonia recovery and size of the plant

Description : Pick out the correct statement. (A) Dialysis process is used for the production of fresh water from brine (B) Electrodialysis is used in the manufacture of NaOH (C) Electrodialysis is used for the refining/purification of petrol (D) Both (B) and (C)

Last Answer : (B) Electrodialysis is used in the manufacture of NaOH

Description : The salt which is used to remove the hardness of water is (A) NaOH (B)Baking Soda (C) Bleaching powder (D) All of these

Last Answer : (C) Bleaching powder

Description : Explain the manufacture of Sodium Hydroxide (Caustic Soda), NaOH by castner kellner cell 

Last Answer : Preperation--Sodium hydroxide is generally prepared commercially by the electrolysis of sodium chloride in Castner-Kellner cell. A brine solution is electrolysed using a mercury cathode and a carbon anode. Sodium ... The amalgam is treated with water to give sodium hydroxide and hydrogen gas.   

Description : What is role of ammonia in manufacturing of soda ash?

Last Answer : Feel Free to Answer

Description : Which of the following is used for removing air bubbles from glass during its manufacture? (1) Fledspar (2) Arsenic oxide (3) Potassium Carbonate (4) Soda Ash

Last Answer : (2) Arsenic oxide

Description : The common name of sodium bicarbonate is - (1) Soda ash (2) Baking soda (3) Soda lime (4) Baking powder

Last Answer : (2) Baking soda Explanation: Sodium bicarbonate (NaHCO3) is also known as baking soda, bread soda, cooking soda, and bicarbonate of soda. It is primarily used in cooking (baking), as a leavening ... of the batter and forms the characteristic texture and grain in pancakes, cakes, quick breads, etc.