The heat of reaction (A) Depends on the pressure only (B) Depends on the mechanism of reaction only (C) Depends on both pressure and mechanism of reaction (D) Is independent of the mechanism of reaction

The heat of reaction
(A) Depends on the pressure only
(B) Depends on the mechanism of reaction only
(C) Depends on both pressure and mechanism of reaction
(D) Is independent of the mechanism of reaction
by

1 Answer

Answer :

(D) Is independent of the mechanism of reaction
by

Related questions

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Specific rate constant for a second order reaction (A) Is independent of temperature (B) Varies with temperature (C) Depends on the nature of the reactants (D) Both (B) and (C)

Description : Specific rate constant for a second order reaction (A) Is independent of temperature (B) Varies with temperature (C) Depends on the nature of the reactants (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Description : Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Last Answer : (A) Two temperatures only

Which of the following factors does not govern the mechanism of petroleum formation from organic sources? (A) pH of the soil (B) Bacterial action (C) Heat (D) Pressure

Description : Which of the following factors does not govern the mechanism of petroleum formation from organic sources? (A) pH of the soil (B) Bacterial action (C) Heat (D) Pressure

Last Answer : (A) pH of the soil

In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Description : In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Last Answer : (D) Friction factor is independent of the relative roughness

At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these

Description : At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these

Last Answer : (A) Partial pressure of vapour in the mixture

The work done in an adiabatic change in a particular gas depends upon changes in the __________ only. (A) Temperature (B) Specific heat (C) Volume (D) Pressure

Description : The work done in an adiabatic change in a particular gas depends upon changes in the __________ only. (A) Temperature (B) Specific heat (C) Volume (D) Pressure

Last Answer : (A) Temperature

Chemical reaction rate of a component depends upon the (A) Composition of the component only (B) Temperature of the system (C) Pressure of the system (D) All (A), (B) and (C)

Description : Chemical reaction rate of a component depends upon the (A) Composition of the component only (B) Temperature of the system (C) Pressure of the system (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The equilibrium constant ‘K’ of a chemical reaction depends on (A) Temperature only (B) Pressure only (C) Temperature and pressure (D) Ratio of reactants

Description : The equilibrium constant ‘K’ of a chemical reaction depends on (A) Temperature only (B) Pressure only (C) Temperature and pressure (D) Ratio of reactants

Last Answer : (A) Temperature only

Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction (C) The equilibrium constant of a reaction depends upon temperature only (D) The conversion for a gas phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Description : Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With ... phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Last Answer : (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

If the molar heat capacities (Cp or Cv) of the reactants and products of a chemical reaction are identical, then, with the increase in temperature, the heat of reaction will (A) Increase (B) Decrease (C) Remain unaltered (D) Increase or decrease; depends on the particular reaction

Description : If the molar heat capacities (Cp or Cv) of the reactants and products of a chemical reaction are identical, then, with the increase in temperature, the heat of reaction will (A) Increase (B) Decrease (C) Remain unaltered (D) Increase or decrease; depends on the particular reaction

Last Answer : (C) Remain unaltered

When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced conduction (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Description : When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced ... (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Last Answer : (C) Mixed convection (both free and forced)

In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Gabapentin acts: A. As GABAA agonist B. As precursor of GABA C. By enhancing GABA release D. By GABA independent mechanism

Description : Gabapentin acts: A. As GABAA agonist B. As precursor of GABA C. By enhancing GABA release D. By GABA independent mechanism

Last Answer : C. By enhancing GABA release

The specific speed of a centrifugal compressor is generally A. less than that of reciprocating compressor B. independent of compressor type, but depends only on size of compressor C. higher than that of axial compressor D. more than specific speed of reciprocating compressor but less than axial compressor

Description : The specific speed of a centrifugal compressor is generally A. less than that of reciprocating compressor B. independent of compressor type, but depends only on size of compressor C. higher ... axial compressor D. more than specific speed of reciprocating compressor but less than axial compressor

Last Answer : ANSWER : C

Deformation drag, which is caused by widespread deformation of fluid around the immersed body(A) Occurs when NReis very small(B) Is primarily a friction drag(C) Is independent of body length(D) Depends mainly on cross-sectional shape

Description : Deformation drag, which is caused by widespread deformation of fluid around the immersed body (A) Occurs when NRe is very small (B) Is primarily a friction drag (C) Is independent of body length (D) Depends mainly on cross-sectional shape

Last Answer : (A) Occurs when NRe is very small

If the heat of solution of an ideal gas in a liquid is negative, then its solubility at a given partial pressure varies with the temperature as (A) Solubility increases as temperature increases (B) Solubility increases as temperature decreases (C) Solubility is independent of temperature (D) Solubility increases or decreases with temperature depending on the Gibbs free energy change of solution

Description : If the heat of solution of an ideal gas in a liquid is negative, then its solubility at a given partial pressure varies with the temperature as (A) Solubility increases as temperature ... (D) Solubility increases or decreases with temperature depending on the Gibbs free energy change of solution

Last Answer : (B) Solubility increases as temperature decreases

Pick out the wrong statement. (A) Orifice baffles are never used in a shell and tube heat exchanger (B) Pressure drop on the shell side of a heat exchanger depends upon tube pitch also

Description : Pick out the wrong statement. (A) Orifice baffles are never used in a shell and tube heat exchanger (B) Pressure drop on the shell side of a heat exchanger depends upon tube pitch also

Last Answer : (A) Orifice baffles are never used in a shell and tube heat exchanger

For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant(A) Is independent of pressure(B) Increases with pressure(C) Decreases with pressure(D) Increases /decreases with pressure depending on the stoichiometric co￾efficients of the reaction

Description : For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant (A) Is independent of pressure (B) Increases with pressure (C) Decreases with pressure (D) Increases /decreases with pressure depending on the stoichiometric co￾efficients of the reaction

Last Answer : (B) Increases with pressure

The total change in the enthalpy of a system is independent of the (A) Number of intermediate chemical reactions involved (B) Pressure and temperature (C) State of combination and aggregation in the beginning and at the end of the reaction (D) None of these

Description : The total change in the enthalpy of a system is independent of the (A) Number of intermediate chemical reactions involved (B) Pressure and temperature (C) State of combination and aggregation in the beginning and at the end of the reaction (D) None of these

Last Answer : (A) Number of intermediate chemical reactions involved

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

The standard Gibbs free energy change of a reaction depends on the equilibrium (A) Pressure (B) Temperature (C) Composition (D) All (A), (B) and (C)

Description : The standard Gibbs free energy change of a reaction depends on the equilibrium (A) Pressure (B) Temperature (C) Composition (D) All (A), (B) and (C)

Last Answer : (B) Temperature

Cvfor an ideal gas (A) Does not depend upon temperature (B) Is independent of pressure only (C) Is independent of volume only (D) Is independent of both pressure and volume

Description : Cvfor an ideal gas (A) Does not depend upon temperature (B) Is independent of pressure only (C) Is independent of volume only (D) Is independent of both pressure and volume

Last Answer : (D) Is independent of both pressure and volume

In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Description : In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Last Answer : (C) Only one of the liquids may be pumped at any desired rate

Heat of a Reaction does not depends upon –

Description : Heat of a Reaction does not depends upon –

Last Answer : Physical state of product and Reactant

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

The relation, Sc = Pr = 1, is valid, when the mechanism of __________ transfer is same. (A) Heat and mass (B) Mass and momentum (C) Heat and momentum (D) Heat, momentum and mass

Description : The relation, Sc = Pr = 1, is valid, when the mechanism of __________ transfer is same. (A) Heat and mass (B) Mass and momentum (C) Heat and momentum (D) Heat, momentum and mass

Last Answer : (A) Heat and mass

In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Description : In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Last Answer : (B) Radiation

The only CORRECT combination in which the reaction proceeds through radical mechanism is

Description : The only CORRECT combination in which the reaction proceeds through radical mechanism is

Last Answer : The only CORRECT combination in which the reaction proceeds through radical mechanism is A. (IV)(i)(Q) B. (III)(ii)(P) C. (II)(iii)(R) D. (I)(ii)(R)

Which one of the following statements concerning glucose metabolism is correct? (A) The conversion of Glucose to lactate occurs only in the R.B.C (B) Glucose enters most cells by a mechanism in which Na+ and glucose are co-transported (C) Pyruvate kinase catalyses an irreversible reaction (D) An elevated level of insulin leads to a decreased level of fructose 2, 6-bisphosphate in hepatocyte

Description : Which one of the following statements concerning glucose metabolism is correct? (A) The conversion of Glucose to lactate occurs only in the R.B.C (B) Glucose enters most cells by a mechanism in ... ) An elevated level of insulin leads to a decreased level of fructose 2, 6-bisphosphate in hepatocyte

Last Answer : C

Which one of the following statements regarding a catalyst is not correct? A An enzyme is a catalyst that only binds certain substrates. B An enzyme is a protein that is a highly efficient catalyst for one or more chemical reactions in a living system. C Catalysts increase the rate of a reaction by altering the mechanism, thereby increasing the activation energy. D Catalysts do not alter the equilibrium constant for a chemical reaction.

Description : Which one of the following statements regarding a catalyst is not correct? A An enzyme is a catalyst that only binds certain substrates. B An enzyme is a protein that is a highly ... increasing the activation energy. D Catalysts do not alter the equilibrium constant for a chemical reaction.

Last Answer : C Catalysts increase the rate of a reaction by altering the mechanism, thereby increasing the activation energy.

Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Description : Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Last Answer : (B) Temperature distribution is dependent on time

In forced convection, the heat transfer depends on(A) Re, Pr (B) Re, Gr (C) Mainly Gr (D) Re only

Description : In forced convection, the heat transfer depends on (A) Re, Pr (B) Re, Gr (C) Mainly Gr (D) Re only

Last Answer : (A) Re, Pr

Work done in an adiabatic process between two states depends on the (A) Rate of heat transmission (B) Initial state only (C) End states only (D) None of these

Description : Work done in an adiabatic process between two states depends on the (A) Rate of heat transmission (B) Initial state only (C) End states only (D) None of these

Last Answer : C) End states only

The exit age distribution of fluid leaving a vessel is used to know the (A) Activation energies of a reaction (B) Reaction mechanism (C) Extent of non-ideal flow in the vessel (D) None of these

Description : The exit age distribution of fluid leaving a vessel is used to know the (A) Activation energies of a reaction (B) Reaction mechanism (C) Extent of non-ideal flow in the vessel (D) None of these

Last Answer : (C) Extent of non-ideal flow in the vessel

A catalyst in a chemical reaction (A) Decreases the activation energy (B) Alters the reaction mechanism (C) Increases the frequency of collisions of reacting species (D) All (A), (B) and (C)

Description : A catalyst in a chemical reaction (A) Decreases the activation energy (B) Alters the reaction mechanism (C) Increases the frequency of collisions of reacting species (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Free energy changes for two reaction mechanism 'X' and 'Y are respectively - 15 and - 5 units. It implies that ‘X’ is (A) Slower than Y (B) Faster than Y (C) Three times slower than Y (D) Three times faster than Y

Description : Free energy changes for two reaction mechanism 'X' and 'Y are respectively - 15 and - 5 units. It implies that ‘X’ is (A) Slower than Y (B) Faster than Y (C) Three times slower than Y (D) Three times faster than Y

Last Answer : (B) Faster than Y

Chemical engineering thermodynamics is concerned with the __________ in/of chemical processes. (A) Reaction mechanism (B) Calculation of rates (C) Energy transformation from one form to another (D) None of these

Description : Chemical engineering thermodynamics is concerned with the __________ in/of chemical processes. (A) Reaction mechanism (B) Calculation of rates (C) Energy transformation from one form to another (D) None of these

Last Answer : (C) Energy transformation from one form to another

Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Heat balance consideration

For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Chemical

Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Description : Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The energy of activation of a chemical reaction: (A) Is same as heat of reaction at constant pressure (B) Is the minimum energy which the molecules must have before the reaction can take place (C) Varies as fifth power of the temperature (D) Both (B) and (C)

Description : The energy of activation of a chemical reaction: (A) Is same as heat of reaction at constant pressure (B) Is the minimum energy which the molecules must have before the reaction can take place (C) Varies as fifth power of the temperature (D) Both (B) and (C)

Last Answer : (B) Is the minimum energy which the molecules must have before the reaction can take place

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for different types of soils but same for a soil under different states of consolidation (D) Independent of type of soil but depends on the stress history of soil

Description : Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for ... of consolidation (D) Independent of type of soil but depends on the stress history of soil

Last Answer : Answer: Option B

The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil

Description : The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil

Last Answer : a) Soil water content *

The temperature at which water boils depends mainly on ------? A. Air temperature B. Relative humidity C. Air pressure (Answer) D. Air density E. The specific heat of air

Description : The temperature at which water boils depends mainly on ------? A. Air temperature B. Relative humidity C. Air pressure (Answer) D. Air density E. The specific heat of air

Last Answer : C. Air pressure (Answer)

Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Description : Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Last Answer : Answer : a