Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Economy of a multiple effect evaporator depends upon the
(A) Heat balance consideration
(B) Rate of heat transfer
(C) Both (A) and (B)
(D) Neither (A) nor (B
by

1 Answer

Answer :

(A) Heat balance consideration
by

Related questions

Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Description : Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Last Answer : (A) Boiling point elevations

A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Description : A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Last Answer : (A) Higher economy

In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Description : In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Last Answer : (A) Reduce the capacity

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Chemical

Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The internal energy of an incompressible fluid depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The internal energy of an incompressible fluid depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

In a forward feed multiple effect evaporator unit (A) Viscosity of liquid is highest in first effect (B) Transfer from effect to effect is done by pumps (C) No pump is required to withdraw the product from the last effect (D) None of these

Description : In a forward feed multiple effect evaporator unit (A) Viscosity of liquid is highest in first effect (B) Transfer from effect to effect is done by pumps (C) No pump is required to withdraw the product from the last effect (D) None of these

Last Answer : (D) None of these

Quality of transmission depends upon (1) Nature of signal only (2) Nature of medium only (3) Both (1) and (2) (4) Neither A nor B

Description : Quality of transmission depends upon (1) Nature of signal only (2) Nature of medium only (3) Both (1) and (2) (4) Neither A nor B

Last Answer : (3) Both (1) and (2) Explanation: Quality of transmission is governed both by nature of signal and nature of communication channel/medium.

The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Description : The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Last Answer : c. Both (a) and (b)

Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Description : Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Last Answer : (C) Both (A) and (B)

Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

Mu opioids have which of the following effects on respiratory rate: a) Stimulation, then depression Mu opioids also cause bradycardia, hypothermia, and constipation. b) No change Kappa opioids result in no change in respiratory rate. c) Stimulation, only Delta opioids result in stimulation of respiratory rate. d) Depression, only Neither mu, nor kappa, nor delta opoids depress respiratory rate as its only effect upon respiratory rate.

Description : Mu opioids have which of the following effects on respiratory rate: a) Stimulation, then depression Mu opioids also cause bradycardia, hypothermia, and constipation. b) No change Kappa opioids result ... nor kappa, nor delta opoids depress respiratory rate as its only effect upon respiratory rate.

Last Answer : a) Stimulation, then depression Mu opioids also cause bradycardia, hypothermia, and constipation.

The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

The rate of heat transfer from a vertical plate by natural convection depends upon the temperature differences (ΔT) between wall and outside bulk. The proportionality is given as (A) (ΔT) 1/4 (B) (ΔT) 1/2 (C) (ΔT) 5/4 (D) (ΔT) 3/4

Description : The rate of heat transfer from a vertical plate by natural convection depends upon the temperature differences (ΔT) between wall and outside bulk. The proportionality is given as (A) (ΔT) 1/4 (B) (ΔT) 1/2 (C) (ΔT) 5/4 (D) (ΔT) 3/4

Last Answer : (D) (ΔT) 3/4

Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Description : Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Description : or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Last Answer : (C) 1

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Refrigeration cycle (A) Violates second law of thermodynamics (B) Involves transfer of heat from low temperature to high temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Refrigeration cycle (A) Violates second law of thermodynamics (B) Involves transfer of heat from low temperature to high temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Involves transfer of heat from low temperature to high temperature

In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Description : Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Formation of frost on evaporator in refrigerator (a) results in loss of heat due to poor heat transfer (b) increases heat transfer rate (c) decreases compressor power. (d) can be avoided by proper design

Description : Formation of frost on evaporator in refrigerator (a) results in loss of heat due to poor heat transfer (b) increases heat transfer rate (c) decreases compressor power. (d) can be avoided by proper design

Last Answer : Ans: a

The effect of friction on the flow of steam through a nozzle is to decrease the __________ of steam. (A) Wetness (B) Mass flow rate (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : The effect of friction on the flow of steam through a nozzle is to decrease the __________ of steam. (A) Wetness (B) Mass flow rate (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Description : What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Last Answer : (C) < 1

In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Description : In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Last Answer : (B) < 1

Steam economy in case of a triple effect evaporator will be (A) 1(B) < 1 (C) > 1 (D) Between 0 and 1

Description : Steam economy in case of a triple effect evaporator will be (A) 1 (B) < 1 (C) > 1 (D) Between 0 and 1

Last Answer : (C) > 1

________ of depreciation calculation accounts for the interest on investment. (A) Straight line method (B) Declining balance (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : ________ of depreciation calculation accounts for the interest on investment. (A) Straight line method (B) Declining balance (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : D) Neither (A) nor (B)

Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Description : Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Last Answer : (B) Mechanical draft cooling tower

. In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Description : . In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Last Answer : (B) Feed flows from low pressure to high pressure

For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Description : For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Last Answer : (B) Backward

A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Description : Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Last Answer : (C) Multiple effect evaporator

In a forward feed multiple effect evaporator, the pressure is (A) Highest in last effect (B) Lowest in last effect (C) Same in all effects (D) Dependent on the number of effects

Description : In a forward feed multiple effect evaporator, the pressure is (A) Highest in last effect (B) Lowest in last effect (C) Same in all effects (D) Dependent on the number of effects

Last Answer : (B) Lowest in last effect

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis