The exit age distribution of fluid leaving a vessel is used to know the (A) Activation energies of a reaction (B) Reaction mechanism (C) Extent of non-ideal flow in the vessel (D) None of these

The exit age distribution of fluid leaving a vessel is used to know the
(A) Activation energies of a reaction
(B) Reaction mechanism
(C) Extent of non-ideal flow in the vessel
(D) None of these
by

1 Answer

Answer :

(C) Extent of non-ideal flow in the vessel
by

Related questions

The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Description : The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Last Answer : (B) 1

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

For an ideal mixed flow reactor (CSTR), the exit age distribution E(t) is given by (A) A Dirac delta function (B) A step function (C) A ramp function (D) None of the above

Description : For an ideal mixed flow reactor (CSTR), the exit age distribution E(t) is given by (A) A Dirac delta function (B) A step function (C) A ramp function (D) None of the above

Last Answer : (D) None of the above

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

Pick out the correct statement. (A) Reactions with high activation energies are very temperature sensitive (B) Chemical equilibrium is a static state (C) A photochemical reaction is catalysed by light (D) A chemical reaction occurs when the energy of the reacting molecule is less than the activation energy of the reaction

Description : Pick out the correct statement. (A) Reactions with high activation energies are very temperature sensitive (B) Chemical equilibrium is a static state (C) A photochemical reaction is catalysed by ... occurs when the energy of the reacting molecule is less than the activation energy of the reaction

Last Answer : (A) Reactions with high activation energies are very temperature sensitive (B) Chemical equilibrium is a static state

The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR >> (1 + KA PA), the apparent activation energy EA is equal to (given E is the activation energy for the reaction and ΔHR and ΔHA are the activation energies of adsorption of R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR

Description : The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR ... R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR

Last Answer : (C) E + ΔHA - ΔHR )

The exit age distribution curve E(t) for an ideal CSTR with the average residence time, τ, is given by (A) e -t/τ (B) e -t/τ /τ (C) 1 - e -t/τ (D) 1 - (e -t/τ /τ)

Description : The exit age distribution curve E(t) for an ideal CSTR with the average residence time, τ, is given by (A) e -t/τ (B) e -t/τ /τ (C) 1 - e -t/τ (D) 1 - (e -t/τ /τ)

Last Answer : (B) e -t/τ /τ

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

In an ideal mixed reactor (at steady state), the (A) Space time is equivalent to holding time for constant density systems (B) Composition throughout the reactor remains same (C) Exit stream has the same composition as the fluid within the reactor (D) All (A), (B) and (C)

Description : In an ideal mixed reactor (at steady state), the (A) Space time is equivalent to holding time for constant density systems (B) Composition throughout the reactor remains same (C) Exit stream has the same composition as the fluid within the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

For multiple reactions, the flow pattern within the vessel affects the (A) Size requirement (B) Distribution of reaction products (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multiple reactions, the flow pattern within the vessel affects the (A) Size requirement (B) Distribution of reaction products (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in a reaction involving many steps is the fastest step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

A catalyst in a chemical reaction (A) Decreases the activation energy (B) Alters the reaction mechanism (C) Increases the frequency of collisions of reacting species (D) All (A), (B) and (C)

Description : A catalyst in a chemical reaction (A) Decreases the activation energy (B) Alters the reaction mechanism (C) Increases the frequency of collisions of reacting species (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Asymptotic conditions is reached, when for a fluid flowing in laminar flow through a long tube (A) Exit-fluid temperature > wall temperature (B) Exit fluid temperature < wall temperature (C) Exit fluid temperature = wall temperature (D) Graetz number > 100

Description : Asymptotic conditions is reached, when for a fluid flowing in laminar flow through a long tube (A) Exit-fluid temperature > wall temperature (B) Exit fluid temperature < wall temperature (C) Exit fluid temperature = wall temperature (D) Graetz number > 100

Last Answer : (C) Exit fluid temperature = wall temperature

Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Description : Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which one of the following statements regarding a catalyst is not correct? A An enzyme is a catalyst that only binds certain substrates. B An enzyme is a protein that is a highly efficient catalyst for one or more chemical reactions in a living system. C Catalysts increase the rate of a reaction by altering the mechanism, thereby increasing the activation energy. D Catalysts do not alter the equilibrium constant for a chemical reaction.

Description : Which one of the following statements regarding a catalyst is not correct? A An enzyme is a catalyst that only binds certain substrates. B An enzyme is a protein that is a highly ... increasing the activation energy. D Catalysts do not alter the equilibrium constant for a chemical reaction.

Last Answer : C Catalysts increase the rate of a reaction by altering the mechanism, thereby increasing the activation energy.

The 'E' curve for a non-ideal reactor defines the fraction of fluid having age between t and t + dt (A) At the inlet (B) At the outlet (C) In the reactor (D) Averaged over the inlet and outlet

Description : The 'E' curve for a non-ideal reactor defines the fraction of fluid having age between t and t + dt (A) At the inlet (B) At the outlet (C) In the reactor (D) Averaged over the inlet and outlet

Last Answer : (B) At the outlet

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

In a/an __________ vessel, the fluid enters and leaves following plug flow. (A) Open (B) Closed (C) Open-closed (D) Close-opened

Description : In a/an __________ vessel, the fluid enters and leaves following plug flow. (A) Open (B) Closed (C) Open-closed (D) Close-opened

Last Answer : (B) Closed

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Description : An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Last Answer : (A) Maximum at the inlet of the reactor

An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum along the length of the reactor (C) Goes through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Description : An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum ... through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Last Answer : (A) Is maximum at the inlet of the reactor

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

Which of the following statement(s) is/are true concerning the physiology of the microvascular system? a. Filtration of capillary fluid into the interstitial and the subsequent reabsorption is influenced by Starling’s law of ultrafiltration b. The most important variable controlling blood to a capillary bed is the length of the vessel c. Most of the resistance to systemic blood flow occurs at the arteriolar level d. Adrenergic vasoconstriction can arrest blood flow to an entire capillary bed

Description : Which of the following statement(s) is/are true concerning the physiology of the microvascular system? a. Filtration of capillary fluid into the interstitial and the subsequent reabsorption is ... the arteriolar level d. Adrenergic vasoconstriction can arrest blood flow to an entire capillary bed

Last Answer : Answer: a, c, d Exchange of material between the vascular space and the cell of various tissues via the interstitial space is essential for organ viability and occurs at the ... contractions are potent enough that blood flow to entire capillary beds can be arrested by adrenergic vasoconstriction

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Description : Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Last Answer : A) 300 × (32/7)

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Description : For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Last Answer : (C) Dead zone

In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site (C) All the adsorption does not take place by the same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface

Description : In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of ... same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface

Last Answer : (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site

For an ideal fluid flow, Reynolds number is (A) 2100 (B) 100 (C) 0 (D) ∞

Description : For an ideal fluid flow, Reynolds number is (A) 2100 (B) 100 (C) 0 (D) ∞

Last Answer : (D) ∞

The continuity equation in ideal fluid flow states that (A) Net rate of inflow into any small volume must be zero (B) Energy is not constant along a streamline (C) Energy is constant along a streamline (D) There exists a velocity potential

Description : The continuity equation in ideal fluid flow states that (A) Net rate of inflow into any small volume must be zero (B) Energy is not constant along a streamline (C) Energy is constant along a streamline (D) There exists a velocity potential

Last Answer : (A) Net rate of inflow into any small volume must be zero

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

For steady ideal fluid flow, the Bernoulli's equation states that the (A) Velocity is constant along a stream line (B) Energy is constant throughout the fluid (C) Energy is constant along a stream line, but may vary across stream lines (D) None of these

Description : For steady ideal fluid flow, the Bernoulli's equation states that the (A) Velocity is constant along a stream line (B) Energy is constant throughout the fluid (C) Energy is constant along a stream line, but may vary across stream lines (D) None of these

Last Answer : (C) Energy is constant along a stream line, but may vary across stream lines

Which of the following must be followed by the flow of a fluid (real or ideal)? (I) Newton's law of viscosity. (II) Newton's second law of motion. (III) The continuity equation. (IV) Velocity of boundary layer must be zero relative to boundary. (V) Fluid cannot penetrate a boundary. (A) I, II, III (B) II, III, V (C) I, II, V (D) II, IV, V

Description : Which of the following must be followed by the flow of a fluid (real or ideal)? (I) Newton's law of viscosity. (II) Newton's second law of motion. (III) The continuity equation. (IV) Velocity of boundary layer must be zero relative to ... . (A) I, II, III (B) II, III, V (C) I, II, V (D) II, IV, V

Last Answer : (B) II, III, V

The Reynolds number for an ideal fluid flow is (A) 4 (B) 2100-4000 (C) 4000 (D) ∞

Description : The Reynolds number for an ideal fluid flow is (A) 4 (B) 2100-4000 (C) 4000 (D) ∞

Last Answer : (D) ∞

In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Description : In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Last Answer : (B) The conversion of the reactant varies from point to point along a flow path

In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Description : In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In the reaction `._1^2 H + ._1^3 H rarr ._2^4 He + ._0^1 n`, if the binding energies of `._1^2 H, ._1^3 H` and `._2^4 He` are respectively `a,b` and `

Description : In the reaction `._1^2 H + ._1^3 H rarr ._2^4 He + ._0^1 n`, if the binding energies of `._1^2 H, ._1^3 H` and `._2^4 He` are respectively `a,b` and `

Last Answer : In the reaction `._1^2 H + ._1^3 H rarr ._2^4 He + ._0^1 n`, if the binding energies of `._1^2 H, ._1^3 H` and ... c + a - b C. c - a - b D. a + b + c

Making use of the tables of atomic masses, determine the energies of the following reaction: (a) `Li^(7)(p,n)Be^(7)` , (b)`Be^(9)(n,gamma)Be^(10)`, (c

Description : Making use of the tables of atomic masses, determine the energies of the following reaction: (a) `Li^(7)(p,n)Be^(7)` , (b)`Be^(9)(n,gamma)Be^(10)`, (c

Last Answer : Making use of the tables of atomic masses, determine the energies of the following reaction: (a) `Li^(7)(p,n)Be^(7 ... `, (d) `O^(16)(d,alpha)N^(14)`.

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

The distribution of shear stress in a stream of fluid in a circular tube is(A) Linear with radius for turbulent flow only(B) Linear with radius for laminar flow only(C) Linear with radius for both laminar & turbulent flow(D) Parabolic with radius for both laminar & turbulent flow

Description : The distribution of shear stress in a stream of fluid in a circular tube is (A) Linear with radius for turbulent flow only (B) Linear with radius for laminar flow only (C) Linear with radius for both laminar & turbulent flow (D) Parabolic with radius for both laminar & turbulent flow

Last Answer : (C) Linear with radius for both laminar & turbulent flow

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

The complement system consists of a series of serum proteins that exist in a quiescent or very low-level state of activation in the uninfected host. Which of the following statement(s) is/are true concerning complement activation? a. The alternate (properdin) pathway of complement activation can occur directly through contact with fungal or bacterial cell wall compounds b. Complement component fragments may serve to decrease vascular permeability c. Excessive complement activation can produce deleterious effects d. Fragments of certain complement components serve as chemoattractants to additional cellular components of the host defense mechanism

Description : The complement system consists of a series of serum proteins that exist in a quiescent or very low-level state of activation in the uninfected host. Which of the following ... certain complement components serve as chemoattractants to additional cellular components of the host defense mechanism

Last Answer : Answer: a, c, d Complement activation can occur through either classic or alternate (properdin) pathways, both of which eventuate in deposition of terminal complement pathway components on the ... and release of lysosomal enzymes that can directly damage certain target tissues, such as the lung

Which of the following statements about the coagulation cascade is/are true? A. The intrinsic pathway of coagulation is the predominant pathway in vivo for hemostasis and coagulation. B. The intrinsic pathway beginning with the activation of factor XII is the predominant in vivo mechanism for activation of the coagulation cascade. C. Deficiencies of factor VIII and IX cause highly significant coagulation abnormalities. D. Deficiencies of factor XII cause severe clinical bleeding syndromes.

Description : Which of the following statements about the coagulation cascade is/are true? A. The intrinsic pathway of coagulation is the predominant pathway in vivo for hemostasis and coagulation. ... coagulation abnormalities. D. Deficiencies of factor XII cause severe clinical bleeding syndromes.

Last Answer : Answer: AC DISCUSSION: Although it was previously held that two somewhat distinct pathways existed for the activation of the coagulation cascade, it is now recognized that the predominant ... bleeding. This further emphasizes the secondary role that the intrinsic pathway plays in coagulation