The 'E' curve for a non-ideal reactor defines the fraction of fluid having age between t and t + dt (A) At the inlet (B) At the outlet (C) In the reactor (D) Averaged over the inlet and outlet

The 'E' curve for a non-ideal reactor defines the fraction of fluid having
age between t and t + dt
(A) At the inlet
(B) At the outlet
(C) In the reactor
(D) Averaged over the inlet and outlet
by

1 Answer

Answer :

(B) At the outlet
by

Related questions

The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Description : The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Last Answer : (B) 1

Momentum correction factor used in fluid flow problems accounts for the (A) Change in direction of flow (B) Change in total energy (C) Change in pressure (D) Non uniform direction of velocities at inlet & outlet sections

Description : Momentum correction factor used in fluid flow problems accounts for the (A) Change in direction of flow (B) Change in total energy (C) Change in pressure (D) Non uniform direction of velocities at inlet & outlet sections

Last Answer : (D) Non uniform direction of velocities at inlet & outlet sections

In a 1-1 concurrent heat exchanger, if the tube side fluid outlet temperature is equal to the shell side fluid outlet temperature, then the LMTD is (A) ∞ (B) 0 (C) Equal to the difference between hot and cold fluids inlet temperature (D) Equal to the difference between hot fluid inlet temperature and cold fluid outlet temperature

Description : In a 1-1 concurrent heat exchanger, if the tube side fluid outlet temperature is equal to the shell side fluid outlet temperature, then the LMTD is (A) ∞ (B) 0 ... temperature (D) Equal to the difference between hot fluid inlet temperature and cold fluid outlet temperature

Last Answer : (B) 0

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

For an ideal mixed flow reactor (CSTR), the exit age distribution E(t) is given by (A) A Dirac delta function (B) A step function (C) A ramp function (D) None of the above

Description : For an ideal mixed flow reactor (CSTR), the exit age distribution E(t) is given by (A) A Dirac delta function (B) A step function (C) A ramp function (D) None of the above

Last Answer : (D) None of the above

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Last Answer : (D) Temperature of the solid

6. In a forward feed multiple effect, the pressure build up will be (A) Least at the inlet of the first effect (B) Least at the outlet of the last effect (C) Highest at the inlet of the last effect (D) Highest at the outlet of the last effect

Description : 6. In a forward feed multiple effect, the pressure build up will be (A) Least at the inlet of the first effect (B) Least at the outlet of the last effect (C) Highest at the inlet of the last effect (D) Highest at the outlet of the last effect

Last Answer : (B) Least at the outlet of the last effect

Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Description : Cavitation in a centrifugal pump can be avoided by keeping the (A) Inlet pressure high (B) Outlet pressure low (C) Inlet pressure low (D) Outlet pressure high

Last Answer : (A) Inlet pressure high

The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip of a blade curves in a direction opposite to that (C) Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Description : The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip ... Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Last Answer : (D) Outlet tip of a blade is towards the direction

The exit age distribution curve E(t) for an ideal CSTR with the average residence time, τ, is given by (A) e -t/τ (B) e -t/τ /τ (C) 1 - e -t/τ (D) 1 - (e -t/τ /τ)

Description : The exit age distribution curve E(t) for an ideal CSTR with the average residence time, τ, is given by (A) e -t/τ (B) e -t/τ /τ (C) 1 - e -t/τ (D) 1 - (e -t/τ /τ)

Last Answer : (B) e -t/τ /τ

State the function of the following parts in a heat engine: a) Crank shaft b) spark plug c) carburettord) kick starter e) inlet valve f) outlet valve

Description : State the function of the following parts in a heat engine: a) Crank shaft b) spark plug c) carburettord) kick starter e) inlet valve f) outlet valve

Last Answer : a) Crankshaft converts the linear movement of piston into circular motion. b) Spark plug is used in petrol engine to ignite the mixture of petrol and air in the cylinder. c) Carburettorhelps to mix ... -air or air into the cylinder. f) Outlet Valve allows the exhaust gases out of the cylinder.

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

Why is an electrical outlet called an outlet when you plug things into it? Shouldn't it be called an inlet?

Description : Why is an electrical outlet called an outlet when you plug things into it? Shouldn't it be called an inlet?

Last Answer : Current flow out from the wall socket when you plug a cord into it. If you want this to be called an inlet and not an outlet, then it would need to be reversed. When you plugged the cord ... flow is by a conductor such as your plug that trips the circuit and allows the electricity to flow freely.

A tank has two inlet pipes, A and B, which can fill the tank in 12 hours and 18 hours respectively, and an outlet C which can empty the tank in 9 hour

Description : A tank has two inlet pipes, A and B, which can fill the tank in 12 hours and 18 hours respectively, and an outlet C which can empty the tank in 9 hour

Last Answer : A tank has two inlet pipes, A and B, which can fill the tank in 12 hours and 18 hours ... time taken right from the start to fill the tank.

Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept 5 to 7.5 cm below the inlet invert level C. The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Description : Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept ... . The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Last Answer : ANS: D

In centrifugal pump installation, (A) Pump is properly primed before starting (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe (C) The motor may burn out if it is started with empty delivery pipe and with open gate valve (D) All the above

Description : In centrifugal pump installation,  (A) Pump is properly primed before starting  (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe  (C) The ... out if it is started with empty delivery pipe and with open gate valve  (D) All the above 

Last Answer : (D) All the above 

To avoid an interruption in the flow of a siphon, an air vessel is provided (A) At the inlet (B) At the outlet (C) At the summit (D) At any point between inlet and outle

Description : To avoid an interruption in the flow of a siphon, an air vessel is provided (A) At the inlet (B) At the outlet (C) At the summit (D) At any point between inlet and outle

Last Answer : Answer: Option C

Which one of the following is true to estimate the range of cooling tower? a) Range = cooling water inlet temperature – wet bulb temperature b) Range = cooling water outlet temperature – wet bulb temperature c) Range = heat load in kcal per hour / water circulation in lines per hour d) None of the above

Description : Which one of the following is true to estimate the range of cooling tower? a) Range = cooling water inlet temperature - wet bulb temperature b) Range = cooling water outlet temperature - wet bulb temperature ... = heat load in kcal per hour / water circulation in lines per hour d) None of the above

Last Answer : Range = heat load in kcal per hour / water circulation in lines per hour

Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Description : Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Last Answer : (b) Difference in pressure between suction and delivery ends

For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing guide vane angle at inlet as 90o c) Providing runner vane angle at exit as 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Description : For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing ... 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Last Answer : d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Faucet A basically used as inlet pipe and Faucet B is used as outlet pipe. Faucet A and B both are opened simultaneously, all the time. When Faucet A fills the tank and Faucet B empty the tank, it will take thrice the time than when both the pipes fill the tank. When Faucet B is used for filling the tank, its efficiency remains constant. What is the ratio of efficiency of Faucet A and Faucet B respectively? a) 1:2 b) 2:1 c) 1:3 d) 3:1

Description : Faucet A basically used as inlet pipe and Faucet B is used as outlet pipe. Faucet A and B both are opened simultaneously, all the time. When Faucet A fills the tank and Faucet B empty the tank, it will take thrice the ... efficiency of Faucet A and Faucet B respectively? a) 1:2 b) 2:1 c) 1:3 d) 3:1

Last Answer : B Efficiency when both pipes used to fill = A + B And efficiency when Faucet A is used to fill and Faucet B is used to empty the tank = A-B So (A+B)/(A-B)=3/1 A/B+1/(A/B-1)=3/1 A/B+1=3(A/B-1) 3A/B-A/B=4 2A/B=4 A/B=2 Thus, the ratio of efficiency of Faucet A and B =2:1

24 pumps are connected to a tank. Some of them are inlet pumps and the others are outlet pumps. Each of the inlet pumps an fill the tank in 16hours and each of the outlet pumps can empty the tank completely in 12hours. If all the pumps are kept open, the empty tank gets filled in 48 hours. How many inlet pumps are there? A) 16 B) 18 C) 17 D) 14

Description : 24 pumps are connected to a tank. Some of them are inlet pumps and the others are outlet pumps. Each of the inlet pumps an fill the tank in 16hours and each of the outlet pumps can empty the tank completely in ... gets filled in 48 hours. How many inlet pumps are there? A) 16 B) 18 C) 17 D) 14

Last Answer : D (x/16)-[(24-x)/12] = 1/48 x/16-24/48+x/12=1/48 (3+4)x/48=97/48 7x/48=97/48 7x=97 X=14

For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Description : For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Last Answer : (C) Dead zone

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A x = (A + Bt) e – ωt B x = X e – ξωt (sin ω d t + Φ) C x = (A – Bt) e – ωt D x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... Φ) C x = (A - Bt) e - ωt D x = X e - ξωt (cos ω d t + Φ)

Last Answer : A x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A. x = (A + Bt) e – ωt B. x = X e – ξωt (sin ω d t + Φ) C. x = (A – Bt) e – ωt D. x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... ) C. x = (A - Bt) e - ωt D. x = X e - ξωt (cos ω d t + Φ

Last Answer : A. x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? ( A ) x = (A + Bt) e – ωt (B)x = X e – ξωt (sin ω d t + Φ) (C)x = (A – Bt) e – ωt ( D )x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... (C)x = (A - Bt) e - ωt ( D )x = X e - ξωt (cos ω d t + Φ

Last Answer : ( A ) x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically damped? a. x = (A + Bt) e – ωt b. x = X e – ξωt (sin ω d t + Φ) c. x = (A – Bt) e – ωt d. x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically ... c. x = (A - Bt) e - ωt d. x = X e - ξωt (cos ω d t + Φ)

Last Answer : a. x = (A + Bt) e – ωt

In an ideal mixed reactor (at steady state), the (A) Space time is equivalent to holding time for constant density systems (B) Composition throughout the reactor remains same (C) Exit stream has the same composition as the fluid within the reactor (D) All (A), (B) and (C)

Description : In an ideal mixed reactor (at steady state), the (A) Space time is equivalent to holding time for constant density systems (B) Composition throughout the reactor remains same (C) Exit stream has the same composition as the fluid within the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Description : Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Last Answer : (A) d ln p/dt = Hvap/RT2

An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Description : An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Last Answer : (A) Maximum at the inlet of the reactor

An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum along the length of the reactor (C) Goes through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Description : An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum ... through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Last Answer : (A) Is maximum at the inlet of the reactor

In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Description : In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Last Answer : (A) Is same as that in the reactor

The exit age distribution of fluid leaving a vessel is used to know the (A) Activation energies of a reaction (B) Reaction mechanism (C) Extent of non-ideal flow in the vessel (D) None of these

Description : The exit age distribution of fluid leaving a vessel is used to know the (A) Activation energies of a reaction (B) Reaction mechanism (C) Extent of non-ideal flow in the vessel (D) None of these

Last Answer : (C) Extent of non-ideal flow in the vessel

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Description : Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Last Answer : (A) ∆F = ∆H + T [∂(∆F)/∂T]P

Pick out the Clausius-Clapeyron equation from the following: (A) dP/dT = ∆H/T∆V (B) ln P = - (∆H/RT) + constant (C) ∆F = ∆H + T [∂(∆F)/∂T]P (D) None of these

Description : Pick out the Clausius-Clapeyron equation from the following: (A) dP/dT = ∆H/T∆V (B) ln P = - (∆H/RT) + constant (C) ∆F = ∆H + T [∂(∆F)/∂T]P (D) None of these

Last Answer : B) ln P = - (∆H/RT) + constant

Which of the following exemplifies a three dimensional fluid flow? (A) Fluid flow at the inlet to a nozzle (B) Fluid flow between parallel plates (C) Viscous fluid flow between converging plates (D) None of these

Description : Which of the following exemplifies a three dimensional fluid flow? (A) Fluid flow at the inlet to a nozzle (B) Fluid flow between parallel plates (C) Viscous fluid flow between converging plates (D) None of these

Last Answer : (A) Fluid flow at the inlet to a nozzle

If a healthy average sized male american alligator took on a healthy averaged sized male american black bear would it win?

Description : If a healthy average sized male american alligator took on a healthy averaged sized male american black bear would it win?

Last Answer : Why do you keep asking questions abot episodes of Animal Face-Off?

A professional basketball player averaged 1919.35 points scored each season. About how many points did he score during his twenty year career?

Description : A professional basketball player averaged 1919.35 points scored each season. About how many points did he score during his twenty year career?

Last Answer : About 38387 points.

When the fuel economy of a 20 miles per gallon car is averaged with that of a 40 miles per gallon car and both cars are driven the same number of miles per year, the resulting average, in miles per gallon, is:

Description : When the fuel economy of a 20 miles per gallon car is averaged with that of a 40 miles per gallon car and both cars are driven the same number of miles per year, the resulting average, in miles per gallon, is: 

Last Answer : ANSWER: 26.7 (MILES PER GALLON) (Accept 25.7 TO 27.7)

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

A fluid having no viscosity is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid

Description : A fluid having no viscosity is known as (A) Real fluid (B) Ideal fluid (C) Newtonian fluid (D) Non-Newtonian fluid

Last Answer : Answer: Option B

The space time is equivalent to the holding time in a steady state mixed reactor for (A) Non-isothermal gas reaction (B) Variable fluid density systems (C) Constant fluid density systems(D) Gas reactions with changing number of moles

Description : The space time is equivalent to the holding time in a steady state mixed reactor for (A) Non-isothermal gas reaction (B) Variable fluid density systems (C) Constant fluid density systems (D) Gas reactions with changing number of moles

Last Answer : (C) Constant fluid density systems

LMTD for counter-flow and parallel flow heat exchanger will be the same, when the (A) Cold fluid is heated to a certain temperature by condensing steam (isothermal fluid) (B) Outlet temperature of both the hot and cold fluid are same (C) Outlet temperature of hot fluid is less than the outlet temperature of the cold fluid (D) None of these

Description : LMTD for counter-flow and parallel flow heat exchanger will be the same, when the (A) Cold fluid is heated to a certain temperature by condensing steam (isothermal fluid) (B) Outlet temperature of ... temperature of hot fluid is less than the outlet temperature of the cold fluid (D) None of these

Last Answer : (A) Cold fluid is heated to a certain temperature by condensing steam (isothermal fluid)

In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Description : In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Last Answer : (A) Equal to

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p