Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100
Last Answer : (B) ∞
Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000
Last Answer : (D) 10000 to 100000
Description : The birthrate measures the number of births during a year per – (1) 100 population (2) 1000 population (3) 10000 population (4) 100000 population
Last Answer : (2) 1000 population Explanation: The birth rate is typically the rate of births in a population over time. The rate of births in a population is calculated in several ways: live births ... techniques. The birth rate along with mortality and migration rate are used to calculate population growth.
Description : A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg. (A) 10 (B) 100 (C) 1000 (D) 10000
Last Answer : (B) 100
Description : One ha cm of water is equal to — a. 1000 litre b. 10000 litre c. 100000 litre d. None of these
Last Answer : c. 100000 litre
Description : Internal energy of an element at 1 atm and 25° C is __________ kcal/kg.mole. (A) 0 (B) 273 (C) 25 (D) None of these
Last Answer : (A) 0
Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000
Last Answer : (D) 5000-15000
Description : Pick out the wrong statement. (A) Main constituents of LPG are propane and butane (B) C.V. of natural gas is about 10000 KCal/Nm3 (C) C.V. of LPG is about 26000 kcal/Nm3 (11500 kcal/kg) (D) L.P.G. is lighter than air
Last Answer : (D) L.P.G. is lighter than air
Description : If heat contents of CH4, C2H4 and C3H8 are -17.9, 12.5 and -24.8 kcal/mole respectively, than ΔH for the reaction CH4(g) + C2H4(g) ⇌ C3H8(g) will be __________ Kcal. (A) -19.4 (B) -30.2 (C) 55.2 (D) -55.2
Last Answer : (A) -19.4
Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500
Last Answer : (A) 600-750
Description : Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000
Last Answer : (C) 8000
Description : The calorific value of HSD is — Kcal/kg a. 10000 b. 10550 c. 11100 d. 11650
Last Answer : b. 10550
Description : The value of Cp & Cv respectively for monatomic gases in Kcal/kg Mole.°K are (A) 5 & 3 (B) 3.987 & 1.987 (C) 1.987 & 0.66 (D) 0.66 & 1.987
Last Answer : A) 5 & 3
Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235
Last Answer : d. 10470
Description : A five day B.O.D. at 15°C of the sewage of a town is 100 kg/day. If the 5 day B.O.D. per head at 15°C for standard sewage is 0.1 kg/day, the population equivalent is A. 100 B. 1000 C. 5000 D. 10000
Last Answer : ANS: D
Description : The calorific value of L.D. converter gas is about __________ Kcal/Nm3 . (A) 1800 (B) 800 (C) 4500 (D) 10000
Last Answer : (A) 1800
Description : Calorific value of coke even gas produced by low temperature carbonisation of coal is about __________ Kcal/Nm3 . (A) 4000 (B) 2500 (C) 6500 (D) 10000
Last Answer : (C) 6500
Description : Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000
Last Answer : (B) 4000
Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F
Last Answer : (C) 50 -100 BTU/hr. ft. 2°F
Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10
Last Answer : (C) 1000-10000
Description : In case of physical adsorption, the difference between heat of adsorption and heat of normal condensation is (A) Equal to the heat of formation of surface compound (B) Equal to the heat of wetting (C) Zero (D) Called integral heat of adsorption
Last Answer : (B) Equal to the heat of wetting
Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease
Last Answer : (A) Decreases
Description : The limit adopted in India for booking air insured letter is a) 20000 b) 5000 c) 10000 d) 100000
Last Answer : c) 10000
Description : Answer: b, c The body contains fuel reserves which it can mobilize and utilize during times of starvation or stress. By far the greatest energy component is fat, which is calorically dense since it ... liver and free glucose have a trivial caloric value of less than 1000 kcal for a 70 kg male
Last Answer : Which of the following statement(s) is/are true concerning the indications and administration of nutritional support to cancer patients? a. Preoperative nutritional support should be provided to all ... total parenteral nutrition solutions maintain integrity of the small bowel e. None of the above
Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg
Last Answer : Ans: C
Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.
Last Answer : 5000-6500 kcal / kg
Description : Schedule number of a pipe, which is a measure of its wall thickness, is given by (A) 1000 P'/S (B) 100 P'/S (C) 1000 S/P' (D) 10000 P'/S
Last Answer : (A) 1000 P'/S
Description : Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000
Last Answer : (A) 50
Description : For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000
Last Answer : (B) 5
Description : Thermal equivalent of electrical power in practical calculation is __________ kcal/kWh. (A) 746 (B) 3000 (C) 1000 (D) 550
Last Answer : (B) 3000
Description : Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Pick out the wrong statement. (A) Cp of monatomic gases such as metallic vapor is about 5 kcal/kg.atom (B) The heat capacity of solid inorganic substance is exactly equal to the ... isolated system (D) At absolute zero temperature, the heat capacity for many pure crystalline substances is zero
Last Answer : (C) There is an increase in entropy, when a spontaneous change occurs in an isolated system
Description : Calorific value of furnace oil is about __________ Kcal/kg. (A) 10,000 (B) 15,000 (C) 5,000 (D) 20,000
Last Answer : (A) 10,000
Description : Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000
Description : Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000
Last Answer : (A) 5
Description : Calorific value of tar is about __________ Kcal/kg. (A) 8800 (B) 12000 (C) 14000 (D) 16000
Last Answer : (A) 8800
Description : What is the LCM of 10 100 1000 and 10000?
Last Answer : The least common multiple of 10 100 1,000 and 10,000 is 10,000.
Description : Approximately how many Galaxies are there ? A. 10 Billion Galaxies B. 100 Billion Galaxies (Answer) C. 1000 Billion Galaxies D. 10000 Billion Galaxies
Last Answer : B. 100 Billion Galaxies (Answer)
Description : Amazon EBS currently supports up to ________ IOPS per volume A. 10 B. 100 C. 1000 D. 10000
Last Answer : 1000
Description : Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)
Last Answer : B. CI=[E/(N+E) ]×100
Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps
Last Answer : (C) 1000 bps
Description : The period of a signal is 10 ms. What is its frequency in Hertz ? (A) 10 (B) 100 (C) 1000 (D) 10000
Description : Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500
Last Answer : (B) 500
Description : In plane transmission grating, the angle of diffraction for second order maxima for wavelength 5 x 10 -5 cm is 30 0. Calculate the number of lines in one centimeter of the grating surface. A. 1000 lines/cm B. 5000 lines/cm C. 500 lines/cm D. 10000 lines/cm
Last Answer : B. 5000 lines/cm
Description : Formula for established plant to the seed sown based on the delivery rate (kg/ha) is A. CI=[(E×10000) /(D×W) ]×100 B. CI=[E/(N+E) ]×100 C. Both (A) and (B) D. None of (A) and (B)
Last Answer : A. CI=[(E×10000) /(D×W) ]×100
Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K
Last Answer : (C) 274 K
Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )
Last Answer : a) Specific Energy Consumption of Induction Melting Furnace Molten Steel Production from the Induction melting furnace per day = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE = 655864000/107 = 65.586 ToE
Description : For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (B) Chemical
Description : What is the minimum and maximum limit to deposit in PPF account? a) 500 and 5000 b) 500 and 70000 c) 1000 and 100000 d) 500 and 100000
Last Answer : d) 500 and 100000
Description : Which of the following is not the unit of work, energy and heat? (A) kcal (B) kg m (C) kWhr (D) hp
Last Answer : (D) hp