In case of physical adsorption, the difference between heat of
adsorption and heat of normal condensation is
(A) Equal to the heat of formation of surface compound
(B) Equal to the heat of wetting
(C) Zero
(D) Called integral heat of adsorption
Description : The change in enthalpy per unit weight of adsorbed gas when adsorbed on gas free or "outgassed" adsorbent to from a definite concentration of adsorbate is called its (A) Integral heat of adsorption (B) Heat of wetting (C) Differential heat of adsorption (D) Heat of normal condensation
Last Answer : (A) Integral heat of adsorption
Description : As complete saturation of an adsorbent is approached, the differential heat of adsrop-tion approaches (A) That of normal condensation (B) Integral heat of adsorption (C) Zero (D) None of these
Last Answer : (A) That of normal condensation
Description : The change in enthalpy, when a unit quantity of gas is absorbed by relatively large quantity of adsorbent (on which a definite concentration of the adsorbed gas already exists) is termed as the (A) ... (B) Heat of wetting (C) Integral heat of adsorption (D) None of these
Last Answer : (A) Differential heat of adsorption
Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate
Last Answer : (B) Decreases
Description : In case of physical adsorption, the heat of adsorption is of the order of __________ kcal/kg.mole. (A) 100 (B) 1000 (C) 10000 (D) 100000
Last Answer : (B) 1000
Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants
Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants
Description : Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is ... The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same
Last Answer : (A) Heat transfer by radiation cannot occur across an absolute volume
Description : 10. In Freundlich Adsorption isotherm, the value of 1/n is: (1) 1 in case of chemisorption (2) between 0 and 1 in all cases (3) between 2 and 4 in all cases (4) 1 in case of physical adsorption
Last Answer : between 0 and 1 in all cases
Description : The surface integral of which parameter is zero? a) E b) D c) B d) H
Last Answer : c) B
Description : Which equation will hold good for a magnetic material? a) Line integral of H is zero b) Surface integral of H is zero c) Line integral of B is zero d) Surface integral of B is zero
Last Answer : d) Surface integral of B is zero
Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these
Last Answer : (B) There is no dynamic equilibrium between successive layer
Description : Assertion(A): Physical adsorption of molecules on the surface requires activation energy. Reason(R): Because the bonds of adsorbed molecules are broke
Last Answer : Assertion(A): Physical adsorption of molecules on the surface requires activation energy. Reason(R): ... D. If both Assertion & Reason are False.
Description : The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR ... R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR
Last Answer : (C) E + ΔHA - ΔHR )
Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area
Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted
Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above
Last Answer : F. All of the above
Description : The process of hardening the concrete by keeping its surface moist is known (A) Placing (B) Wetting (C) Curing (D) Compacting
Last Answer : Answer: Option C
Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface
Last Answer : (D) Boiling of a liquid on a hot surface
Description : Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film ... place on it (D) Reynolds number of condensing liquid is based on its mass flow rate
Last Answer : (B) Suitable coating or vapour additive is used to promote film wise condensation
Description : Ore concentration by froth floatation utilises the __________ of oreparticles. (A) Density difference (B) Wetting characteristics (C) Terminal velocities (D) None of these
Last Answer : (B) Wetting characteristics
Description : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x)/(m)` versus log P gives a straight line with slope equal
Last Answer : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x ... of pressure. D. Adsorption is independent of pressure.
Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders
Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order
Description : Pick out the wrong statement. Generally for physical adsorption, a gas of (A) Higher molecular weight is adsorbed in preference to a gas of low molecular weight (B) High critical temperature ... volatility is adsorbed in preference to a gas of high volatility (D) None of these
Last Answer : (D) None of these
Description : For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (B) Chemical
Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its crosssection is wider at the bottom (D) Vander wall adsorption is also called chemisorption
Last Answer : (D) Vander wall adsorption is also called chemisorption
Description : The formation of pockets of gas in a liquid is called: w) absorption x) cavitation y) adsorption z) dissolving
Last Answer : ANSWER: X -- CAVITATION
Description : Mechanism of moisture removal in case of freeze drying of food stuff is by (A) Evaporation (B) Sublimation (C) Dehydration (D) Adsorption
Last Answer : (B) Sublimation
Description : A measure of the extent to which viscous heating is important relative to the heat flow resulting from the impressed temperature difference is represented by the __________ number. (A) Condensation (B) Grashoff (C) Stanton (D) Brinkman
Last Answer : (D) Brinkman
Description : Smoke point of kerosene expresses its (A) Burning characteristics (B) Luminosity characteristics (C) Aromatic content directly (D) Lamp wick wetting characteristics
Last Answer : (A) Burning characteristics
Description : Removal of dirt/soil by soaps or detergent does not involve the __________ of soil. (A) Emulsification (B) Dispersion (C) Precipitation (D) Wetting
Last Answer : (C) Precipitation
Description : Change of heat content when one mole of compound is burnt in oxygen at constant pressure is called the (A) Calorific value (B) Heat of reaction (C) Heat of combustion (D) Heat of formation
Last Answer : (C) Heat of combustion
Description : Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these
Description : In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of ... same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface
Last Answer : (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site
Description : Name type of adsorption in which compound is formed.
Last Answer : Name type of adsorption in which compound is formed.
Description : The line integral of which parameter is zero for static fields? a) E b) H c) D d) B
Last Answer : a) E
Description : Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of ... nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface
Last Answer : (B) The equivalent diameter of heat transfer for a duct of square crosssection (having each side as 'x') is equal to 4x
Description : Chemisorption (chemical adsorption) is (A) Same as "Van der Waals" adsorption (B) Characterised by adsorption of heat (C) An irreversible phenomenon (D) A reversible phenomenon
Last Answer : (C) An irreversible phenomenon
Description : Heat requirement for decomposition of a compound into its elements is __________ that is evolved during the formation of that compound from its elements. (A) The same (B) Less than (C) Greater than (D) Different than
Last Answer : (A) The same
Description : The amount of heat required to decompose a compound into its elements is __________ the heat of formation of that compound from its elements. (A) Less than (B) More than (C) Same as (D) Not related to
Last Answer : (C) Same as
Description : Compound having large heat of formation is (A) More stable (B) Less stable (C) Not at all stable (like nascent O2) (D) Either more or less stable; depends on the compound
Last Answer : A) More stable
Description : Assertion :- The graphical representation of physical adsorption with temp is Reason :- This is weak adsorption & adsorption is exothermic process.
Last Answer : Assertion :- The graphical representation of physical adsorption with temp is Reason :- This is weak ... D. If both Assertion & Reason are False.
Description : Which one of the following is not a property of physical adsorption ?
Last Answer : Which one of the following is not a property of physical adsorption ? A. Higher the ... , more the adsorption D. Unilayer adsorption occurs
Description : Which one of the following characteristics is not correct for physical adsorption ?
Last Answer : Which one of the following characteristics is not correct for physical adsorption ? A. ... enthalpy and entropy of adsorption are negative.
Description : Which of the following statements about physical adsorption is correct ?
Last Answer : Which of the following statements about physical adsorption is correct ? A. It is always ... enthalpy of adsorption as compared to chemisorption.
Description : Identify the appropriate graph between enthalpy and progress of physical adsorption.
Last Answer : Identify the appropriate graph between enthalpy and progress of physical adsorption. A. B. C. D.
Description : There is desorption of physical adsorption when
Last Answer : There is desorption of physical adsorption when A. temperature is increased B. temperature is ... pressure is increased D. concentration is increased
Description : Following is the variation of physical adsorption with temperature.
Last Answer : Following is the variation of physical adsorption with temperature. A. B. C. D.
Description : Why physical adsorption is multimolecular whereas chemisorption is unimolecular ?
Last Answer : Chemisorption takes place as a result of reaction between adsorbent and adsorbate. When the surface of the adsorbent is covered with one layer, no further reaction can take place. Physical adsorption is ... any number of layers may be formed one over the other on the surface of the adsorbent.
Description : Physical removal/loss of herbicides a). Adsorption b). Hydrolysis c). Deamination d). Dealkylation
Last Answer : a). Adsorption
Description : $ The process of formation of polysaccharides by condensation of monomers is called hydrolysis. Glycogen is a stored food materials found in plants.
Last Answer : $ The process of formation of polysaccharides by condensation of monomers is called hydrolysis. Glycogen is a ... D. If both As and R are wrong.
Description : (a) Write electron dot diagram for chlorine (At No. 17) and calcium (At No. 20). Show the formation of calcium chloride by transfer of electrons. (b) Identify the nature of above compound’and explain three physical properties of such compound. -Chemistry
Last Answer : (b) It is ionic compound. Physical properties 1.It is hard and solid. 2.It has high melting and boiling point. 3.It soluble in water.