The maximum power transceived by the antenna is in the region of a) Aperture b) Effective aperture c) Maxima lobe d) Minima lobe

The maximum power transceived by the antenna is in the region of
a) Aperture
b) Effective aperture
c) Maxima lobe
d) Minima lobe
by

1 Answer

Answer :

b) Effective aperture
by

Related questions

The maxima and minima voltage of the standing wave are 6 and 2 respectively. The standing wave ratio is a) 2 b) 3 c) 1/2 d) 4

Description : The maxima and minima voltage of the standing wave are 6 and 2 respectively. The standing wave ratio is a) 2 b) 3 c) 1/2 d) 4

Last Answer : b) 3

Standing wave ratio is defined as the a) Ratio of voltage maxima to voltage minima b) Ratio of current maxima to current minima c) Product of voltage maxima and voltage minima d) Product of current maxima and current minima

Description : Standing wave ratio is defined as the a) Ratio of voltage maxima to voltage minima b) Ratio of current maxima to current minima c) Product of voltage maxima and voltage minima d) Product of current maxima and current minima

Last Answer : a) Ratio of voltage maxima to voltage minima

An increase in the effective power radiated by an antenna in a certain desired direction at the expense of power radiated in other directions. A. Antenna gain B. Antenna back lobe ration C. Antenna total ration D. Antenna efficiency

Description : An increase in the effective power radiated by an antenna in a certain desired direction at the expense of power radiated in other directions. A. Antenna gain B. Antenna back lobe ration C. Antenna total ration D. Antenna efficiency

Last Answer : A. Antenna gain

The refractive index is 2.33 and the critical angle is 350. Find the numerical aperture. a) 2 b) 1.9 c) 2.33 d) 12

Description : The refractive index is 2.33 and the critical angle is 350. Find the numerical aperture. a) 2 b) 1.9 c) 2.33 d) 12

Last Answer : b) 1.9

The numerical aperture of a material with acceptance angle of 60 degree in water will be a) 1.15 b) 2.15 c) 5.21 d) 1.52

Description : The numerical aperture of a material with acceptance angle of 60 degree in water will be a) 1.15 b) 2.15 c) 5.21 d) 1.52

Last Answer : a) 1.15

Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Description : Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Last Answer : c) 45

The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86

Description : The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86

Last Answer : d) 1.86

Numerical aperture is expressed as the a) NA = sin θa b) NA = cos θa c) NA = tan θa d) NA = sec θa

Description : Numerical aperture is expressed as the a) NA = sin θa b) NA = cos θa c) NA = tan θa d) NA = sec θa

Last Answer : a) NA = sin θa

The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____

Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____

Last Answer : line of shoot

When the polarisation of the receiving antenna is unknown, to ensure that it receives atleast half the power, the transmitted wave should be a) Linearly polarised b) Elliptically polarised c) Circularly polarised d) Normally polarised

Description : When the polarisation of the receiving antenna is unknown, to ensure that it receives atleast half the power, the transmitted wave should be a) Linearly polarised b) Elliptically polarised c) Circularly polarised d) Normally polarised

Last Answer : c) Circularly polarised

Which method is effective for escaping from local minima? a) Updating heuristic estimate b) Reducing heuristic estimate c) Eliminating heuristic estimate d) None of the mentioned

Description : Which method is effective for escaping from local minima? a) Updating heuristic estimate b) Reducing heuristic estimate c) Eliminating heuristic estimate d) None of the mentioned

Last Answer : a) Updating heuristic estimate

A weed with a balloon structure for effective dissemination a). Physalis minima b). Avena fatua c). Phalaris minor d). Amaranthus viridis

Description : A weed with a balloon structure for effective dissemination a). Physalis minima b). Avena fatua c). Phalaris minor d). Amaranthus viridis

Last Answer : a). Physalis minima

Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Description : Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Last Answer : D. both A and B

Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Description : Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Last Answer : C. Major lobe radiation

The benefit of Maxwell equation is that a) Any parameter can be calculated b) Antenna can be designed c) Polarisation of the wave can be calculated d) Transmission line constants can be found

Description : The benefit of Maxwell equation is that a) Any parameter can be calculated b) Antenna can be designed c) Polarisation of the wave can be calculated d) Transmission line constants can be found

Last Answer : a) Any parameter can be calculated

Find the electric flux density of a material whose charge density is given by 12 units in a volume region of 0.5 units. a) 12 b) 24 c) 6 d) 48

Description : Find the electric flux density of a material whose charge density is given by 12 units in a volume region of 0.5 units. a) 12 b) 24 c) 6 d) 48

Last Answer : c) 6

If a function is described by F = (3x + z, y 2 − sin x 2 z, xz + ye x5 ), then the divergence theorem value in the region 0<x<1, 0<y<3 and 0<z<2 will be a) 13 b) 26 c) 39 d) 51

Description : If a function is described by F = (3x + z, y 2 − sin x 2 z, xz + ye x5 ), then the divergence theorem value in the region 0

Last Answer : c) 39

If two functions A and B are discrete, their Green’s value for a region of circle of radius a in the positive quadrant is a) ∞ b) -∞ c) 0 d) Does not exist

Description : If two functions A and B are discrete, their Green’s value for a region of circle of radius a in the positive quadrant is a) ∞ b) -∞ c) 0 d) Does not exist

Last Answer : d) Does not exist

Calculate the Green’s value for the functions F = y 2 and G = x 2 for the region x = 1 and y = 2 from origin. a) 0 b) 2 c) -2 d) 1

Description : Calculate the Green’s value for the functions F = y 2 and G = x 2 for the region x = 1 and y = 2 from origin. a) 0 b) 2 c) -2 d) 1

Last Answer : c) -2

The Stoke’s theorem can be used to find which of the following? a) Area enclosed by a function in the given region b) Volume enclosed by a function in the given region c) Linear distance d) Curl of the function

Description : The Stoke’s theorem can be used to find which of the following? a) Area enclosed by a function in the given region b) Volume enclosed by a function in the given region c) Linear distance d) Curl of the function

Last Answer : a) Area enclosed by a function in the given region

The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Description : The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Last Answer : a) 4.16 kilo ohm

What is the ratio of the maximum radiation intensity to the average radiation intensity? A. Aperture gain B. Directivity gain C. Transmission gain D. Power gain

Description : What is the ratio of the maximum radiation intensity to the average radiation intensity? A. Aperture gain B. Directivity gain C. Transmission gain D. Power gain

Last Answer : B. Directivity gain

On an ILS approach, you are told that the weather has dropped below company minima. When must you abort the approach? a. Start of the glide-slope descent b. FAF c. Inner marker d. Outer marker

Description : On an ILS approach, you are told that the weather has dropped below company minima. When must you abort the approach? a. Start of the glide-slope descent b. FAF c. Inner marker d. Outer marker

Last Answer : d. Outer marker

The condition for minima in Fraunhofer diffraction for single slit is asinθ = mλWhat is ‘θ’? A. Angle of incidence of incident rays at the slit B. Angle at which diffracted rays strikes the screen C. Angle between slit and screen D. Angle of diffraction at which rays are diffracted at slit

Description : The condition for minima in Fraunhofer diffraction for single slit is asinθ = mλWhat is ‘θ’? A. Angle of incidence of incident rays at the slit B. Angle at which diffracted rays strikes the screen C. Angle between slit and screen D. Angle of diffraction at which rays are diffracted at slit

Last Answer : D. Angle of diffraction at which rays are diffracted at slit

Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent minima on the screen to increase? A. A. increase the index of refraction of the medium in which the setup is immersed B. increase the separation d between the slits C. increase the distance D. increase the frequency of the incident light

Description : Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent ... d between the slits C. increase the distance D. increase the frequency of the incident light

Last Answer : B. increase the separation d between the slits

VAM is also called........................ a. Matrix Minima Method b. Penalty Method c. MODI Method d. None of these

Description : VAM is also called........................ a. Matrix Minima Method b. Penalty Method c. MODI Method d. None of these

Last Answer : b. Penalty Method

Matrix Minima Method to find initial feasible solution to a TP is also called ....................... a. NWCM b. LCM c. VAM d. None of these

Description : Matrix Minima Method to find initial feasible solution to a TP is also called ....................... a. NWCM b. LCM c. VAM d. None of these

Last Answer : c. VAM

The maximum impedance of a 50 ohm transmission line with SWR of 3 is a) 50/3 b) 3/50 c) 150 d) 450

Description : The maximum impedance of a 50 ohm transmission line with SWR of 3 is a) 50/3 b) 3/50 c) 150 d) 450

Last Answer : c) 150

The loss tangent of a perfect dielectric will be a) Zero b) Unity c) Maximum d) Minimum

Description : The loss tangent of a perfect dielectric will be a) Zero b) Unity c) Maximum d) Minimum

Last Answer : d) Minimum

For conductors, the loss tangent will be a) Zero b) Unity c) Maximum d) Minimum

Description : For conductors, the loss tangent will be a) Zero b) Unity c) Maximum d) Minimum

Last Answer : c) Maximum

In free space, the condition that holds good is a) Minimum attenuation and propagation b) Minimum attenuation and maximum propagation c) Maximum attenuation and minimum propagation d) Maximum attenuation and propagation

Description : In free space, the condition that holds good is a) Minimum attenuation and propagation b) Minimum attenuation and maximum propagation c) Maximum attenuation and minimum propagation d) Maximum attenuation and propagation

Last Answer : b) Minimum attenuation and maximum propagation

Find the maximum force of the conductor having length 60cm, current 2.75A and flux density of 9 units. a) 14.85 b) 18.54 c) 84.25 d) 7.256

Description : Find the maximum force of the conductor having length 60cm, current 2.75A and flux density of 9 units. a) 14.85 b) 18.54 c) 84.25 d) 7.256

Last Answer : a) 14.85

Electric field will be maximum outside the conductor and magnetic field will be maximum inside the conductor. State True/False. a) True b) False

Description : Electric field will be maximum outside the conductor and magnetic field will be maximum inside the conductor. State True/False. a) True b) False

Last Answer : a) True

When the conduction current density and displacement current density are same, the dissipation factor will be a) Zero b) Minimum c) Maximum d) Unity

Description : When the conduction current density and displacement current density are same, the dissipation factor will be a) Zero b) Minimum c) Maximum d) Unity

Last Answer : d) Unity

When a material has zero permittivity, the maximum potential that it can possess is a) ∞ b) -∞ c) Unity d) Zero

Description : When a material has zero permittivity, the maximum potential that it can possess is a) ∞ b) -∞ c) Unity d) Zero

Last Answer : d) Zero

The field intensity of a charge defines the impact of the charge on a test charge placed at a distance. It is maximum at d = 0cm and minimises as d increases. State True/False a) True b) False

Description : The field intensity of a charge defines the impact of the charge on a test charge placed at a distance. It is maximum at d = 0cm and minimises as d increases. State True/False a) True b) False

Last Answer : a) True

Does anyone know how many miles a 2001 Nissan Maxima can run after the gas light turns on?

Description : Does anyone know how many miles a 2001 Nissan Maxima can run after the gas light turns on?

Last Answer : I wouldn’t risk it. I would highly recommend stopping for a gallon of gas or two in the meantime. Running out of gas can cause serious mechanical problems in some cars. I’m not saying it will in yours, but it can in some.

What kind of gas mileage does a 2000 Nissan Maxima SLE get?

Description : What kind of gas mileage does a 2000 Nissan Maxima SLE get?

Last Answer : answer:Here are the government figures. “Fuel Type Regular MPG (city) 19 MPG (highway) 25 MPG (combined) 21 Fuel Economics Cost to Drive 25 Miles $3.07 Fuel to Drive 25 Miles 1.19 gal Annual Fuel Cost $1842”

If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Description : If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Last Answer : b. there is at least one couple acting on the beam

In PS I the reaction centre chlorophyll a has an absorption peak at 700 nm, hence is called (A)____ while in PS II it has absorption maxima at 680 nm

Description : In PS I the reaction centre chlorophyll a has an absorption peak at 700 nm, hence is called (A)____ while in PS II it has absorption maxima at 680 nm

Last Answer : In PS I the reaction centre chlorophyll a has an absorption peak at 700 nm, hence is called (A) ... absorption maxima at 680 nm and is called (B)____

What do you need to do a full tune up on 2014 Nissan Maxima?

Description : What do you need to do a full tune up on 2014 Nissan Maxima?

Last Answer : That will depend on age and mileage to date - refer to theowners manual and/or the service manual.

Where is the fuse box located on a 2000 Nissan maxima?

Description : Where is the fuse box located on a 2000 Nissan maxima?

Last Answer : What is the answer ?

What color interior comes standard on a Nissan Maxima?

Description : What color interior comes standard on a Nissan Maxima?

Last Answer : There are two standard interior colors on a Nossan Maxima depending on the exterior color you choose. They are a gray called charcoal cloth and a light beige called cafe latte cloth.

How much does a Nissan Maxima cost?

Description : How much does a Nissan Maxima cost?

Last Answer : According to the official Nissan site http://www.nissanusa.com/maxima/, the MSRP for the 3.5 S is 30,690.

Nucleic acids can be detected by means of their absorption maxima near 260 nm. Their absorption in this range is due to (A) Proteins (B) Purines and pyrimidines (C) Ribose (D) Deoxyribose

Description : Nucleic acids can be detected by means of their absorption maxima near 260 nm. Their absorption in this range is due to (A) Proteins (B) Purines and pyrimidines (C) Ribose (D) Deoxyribose

Last Answer : Answer : B

If a star is bigger than Sun, but not more than twice as big, it will turn into a (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Description : If a star is bigger than Sun, but not more than twice as big, it will turn into a (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Last Answer : (1) Pulsar Explanation: If the star is about the mass of the Sun or less than that, it will turn into White Dwarfs. If the star is bigger than the Sun but not more than twice as big, it will turn into a Neutron Star or Pulsar.

If a star is bigger than Sun, but not more than twice as big, it will turn into a __ (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Description : If a star is bigger than Sun, but not more than twice as big, it will turn into a __ (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Last Answer : (1) Pulsar Explanation: If the star is about the mass of the Sun or less than that, it will turn into White Dwarfs. If the star is bigger than the Sun but not more than twice as big, it will ... Pulsar. If the star is many times bigger than the Sun, it will turn into what is called a Black Hole.

For shell and tube heat exchanger, with increasing heat transfer area, the purchased cost per unit heat transfer area (A) Increases (B) Decreases (C) Remain constant (D) Passes through a maxima

Description : For shell and tube heat exchanger, with increasing heat transfer area, the purchased cost per unit heat transfer area (A) Increases (B) Decreases (C) Remain constant (D) Passes through a maxima

Last Answer : (D) Passes through a maxima

The main causative agent of Epizootic Ulcerative Syndorme (EVS) is (a) Aphanomyces invadens (b) A. hydrophilla (c) Pseudomonas maxima (d) Myxobolus cyprinid

Description : The main causative agent of Epizootic Ulcerative Syndorme (EVS) is (a) Aphanomyces invadens (b) A. hydrophilla (c) Pseudomonas maxima (d) Myxobolus cyprinid

Last Answer : (a) Aphanomyces invadens

A consecutive reaction, as shown in the bellow figure, is characterised by(A) Maxima in the concentration of A(B) Maxima in the concentration of B(C) Maxima in the concentration of C(D) High exothermicity

Description : A consecutive reaction, as shown in the bellow figure, is characterised by. (A) Maxima in the concentration of A (B) Maxima in the concentration of B (C) Maxima in the concentration of C (D) High exothermicity

Last Answer : (B) Maxima in the concentration of B