. A batch reactor is characterised by (A) Constant residence time(B) Variation in extent of reaction and properties of the reaction mixture withtime(C) Variation in reactor volume(D) Very low conversion

. A batch reactor is characterised by
(A) Constant residence time
(B) Variation in extent of reaction and properties of the reaction mixture with
time
(C) Variation in reactor volume
(D) Very low conversion
by

1 Answer

Answer :

(B) Variation in extent of reaction and properties of the reaction mixture with
time
by

Related questions

In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Description : In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Last Answer : (A) Velocity of reaction can be controlled

Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Description : Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Last Answer : (C) Density of mixture

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

Space time equals the mean residence time (A) When the density of the reaction mixture is constant (B) For large diameter tubular reactor (C) For narrow diameter tubular reactor (D) For CSTR

Description : Space time equals the mean residence time (A) When the density of the reaction mixture is constant (B) For large diameter tubular reactor (C) For narrow diameter tubular reactor (D) For CSTR

Last Answer : (A) When the density of the reaction mixture is constant

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

Mean residence time is equal to the space time, when (A) The feed rate is measured at temperature and pressure in the reactor (B) The temperature, pressure and the density of reaction mixture remains constant throughout the reactor (C) There is no change in number of moles in gaseous reaction (D) All (A), (B) and (C)

Description : Mean residence time is equal to the space time, when (A) The feed rate is measured at temperature and pressure in the reactor (B) The temperature, pressure and the density of reaction mixture remains constant throughout ... no change in number of moles in gaseous reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Description : A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Last Answer : (C) Presence of lateral mixing

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Description : The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Last Answer : (A) XA Vs . τ

The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Description : The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Last Answer : (B) Ideal tubular-flow reactor

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0

. A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors. (A) Both conversion as well as concentration are same (B) Conversion in both will be the same but concentrations will be different (C) Both the conversion as well as concentrations will be different (D) None of these

Description : . A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two ... be different (C) Both the conversion as well as concentrations will be different (D) None of these

Last Answer : (B) Conversion in both will be the same but concentrations will be different

For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Description : For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Last Answer : (D) Single tubular flow reactor (v = 5 litres)

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

When the density of the reaction mixture is constant in a chemical reaction, the ratio of the mean residence time to space time is (A) > 1 (B) < 1 (C) 1 (D) 0

Description : When the density of the reaction mixture is constant in a chemical reaction, the ratio of the mean residence time to space time is (A) > 1 (B) < 1 (C) 1 (D) 0

Last Answer : (C) 1

A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Description : A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Last Answer : (C) 1

For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow reactor decreases with order (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Description : For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow ... (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Last Answer : (A) Mixed reactor is always larger than the plug-flow reactor

In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Description : In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed (C) Cent per cent conversion can be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Description : A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed ... be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Last Answer : (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour

Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Last Answer : (B) Tubular flow reactor

The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞(B) 0 (C) 1 (D) > 1

Description : The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞ (B) 0 (C) 1 (D) > 1

Last Answer : (C) 1

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Description : Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Last Answer : (A) Uniformity of temperature

Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Description : Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Last Answer : (A) Time

The performance equations for constant density systems are identical for (A) P.F.R. and backmix reactor (B) P.F.R. and batch reactor (C) P.F.R, batch reactor and backmix reactor (D) Batch reactor and backmix reactor

Description : The performance equations for constant density systems are identical for (A) P.F.R. and backmix reactor (B) P.F.R. and batch reactor (C) P.F.R, batch reactor and backmix reactor (D) Batch reactor and backmix reactor

Last Answer : (B) P.F.R. and batch reactor

Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same equipment cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Description : Batch process is preferred over continuous process, when the (A) Product yields and quality cannot be achieved in continuous process, because of long residence time (B) Sales demand of product is not steady (C) Same ... cannot be used for several processes of the same nature (D) All (A), (B) & (C)

Last Answer : (B) Sales demand of product is not steady

In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at(A) Low pressure(B) High pressure(C) Very high temperature(D) Atmospheric pressure; as the pressure has no effect on conversion

Description : In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at (A) Low pressure (B) High pressure (C) Very high temperature (D) Atmospheric pressure; as the pressure has no effect on conversion

Last Answer : (B) High pressure

A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Description : A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Last Answer : (D) Same as ideal stirred tank reactor

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Description : A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Last Answer : (B) Suitable for liquid phase reactions involving small production rate

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Description : Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Last Answer : (C) Mixed

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed can be processed every hour (C) It takes three hours to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Description : A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed ... to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Last Answer : (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours

Space time in flow reactor is (A) Usually equal to the residence time (B) The reciprocal of the space velocity(C) A measure of its capacity(D) Both (A) and (B)

Description : Space time in flow reactor is (A) Usually equal to the residence time (B) The reciprocal of the space velocity (C) A measure of its capacity (D) Both (A) and (B)

Last Answer : (D) Both (A) and (B)

For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Description : For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Last Answer : (C) Dead zone

Pick out the wrong statemen(A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an irreversible series reaction (C) The fractional conversion at any time is same for both the constant as well as the variable volume system in case of an irreversible unimolecular type first order reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Description : Pick out the wrong statemen (A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an ... reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Last Answer : (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

In case of the irreversible unimolecular type, first order reaction, the fractional conversion at any time for constant volume system as compared to variable volume system is (A) More (B) Less (C) Same (D) Either (A) or (B), depends on other factors

Description : In case of the irreversible unimolecular type, first order reaction, the fractional conversion at any time for constant volume system as compared to variable volume system is (A) More (B) Less (C) Same (D) Either (A) or (B), depends on other factors

Last Answer : (C) Same