A high space velocity means that a given (A) Reaction can be accomplished with small reactor (B) Conversion can be obtained with a high feed rate (C) Both (A) and (B) (D) None of these

A high space velocity means that a given
(A) Reaction can be accomplished with small reactor
(B) Conversion can be obtained with a high feed rate
(C) Both (A) and (B)
(D) None of these
by

1 Answer

Answer :

(C) Both (A) and (B)
by

Related questions

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed (C) Cent per cent conversion can be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Description : A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed ... be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Last Answer : (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour

A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed can be processed every hour (C) It takes three hours to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Description : A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed ... to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Last Answer : (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞(B) 0 (C) 1 (D) > 1

Description : The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞ (B) 0 (C) 1 (D) > 1

Last Answer : (C) 1

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

Mean residence time is equal to the space time, when (A) The feed rate is measured at temperature and pressure in the reactor (B) The temperature, pressure and the density of reaction mixture remains constant throughout the reactor (C) There is no change in number of moles in gaseous reaction (D) All (A), (B) and (C)

Description : Mean residence time is equal to the space time, when (A) The feed rate is measured at temperature and pressure in the reactor (B) The temperature, pressure and the density of reaction mixture remains constant throughout ... no change in number of moles in gaseous reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Description : In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Last Answer : (A) Velocity of reaction can be controlled

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) Emission of hazardous radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Description : The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) ... radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Last Answer : (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission

An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Description : An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Last Answer : (C) Decrease

With increase in the space time of an irreversible isothermal reaction being carried out in a P.F. reactor, the conversion will (A) Increase (B) Decrease (C) Remain same (D) Data in insufficient; can't be predicted

Description : With increase in the space time of an irreversible isothermal reaction being carried out in a P.F. reactor, the conversion will (A) Increase (B) Decrease (C) Remain same (D) Data in insufficient; can't be predicted

Last Answer : (A) Increase

The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2(D) 3

Description : The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0.5

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Description : In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Description : For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Last Answer : (B) Fluidised bed reactor followed by a fixed

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

. A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors. (A) Both conversion as well as concentration are same (B) Conversion in both will be the same but concentrations will be different (C) Both the conversion as well as concentrations will be different (D) None of these

Description : . A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two ... be different (C) Both the conversion as well as concentrations will be different (D) None of these

Last Answer : (B) Conversion in both will be the same but concentrations will be different

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

Space time in flow reactor is (A) Usually equal to the residence time (B) The reciprocal of the space velocity(C) A measure of its capacity(D) Both (A) and (B)

Description : Space time in flow reactor is (A) Usually equal to the residence time (B) The reciprocal of the space velocity (C) A measure of its capacity (D) Both (A) and (B)

Last Answer : (D) Both (A) and (B)

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0

. A batch reactor is characterised by (A) Constant residence time(B) Variation in extent of reaction and properties of the reaction mixture withtime(C) Variation in reactor volume(D) Very low conversion

Description : . A batch reactor is characterised by (A) Constant residence time (B) Variation in extent of reaction and properties of the reaction mixture with time (C) Variation in reactor volume (D) Very low conversion

Last Answer : (B) Variation in extent of reaction and properties of the reaction mixture with time

The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Description : The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Last Answer : (A) XA Vs . τ

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Description : Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Last Answer : (C) Density of mixture

The main purpose of recycling the byproduct hydrogen gas in the reformer reactor is to (A) Obviate catalyst poisoning (B) Maintain the reaction temperature (C) Sustain the reactor pressure (D) Hydrogenate the feed stock

Description : The main purpose of recycling the byproduct hydrogen gas in the reformer reactor is to (A) Obviate catalyst poisoning (B) Maintain the reaction temperature (C) Sustain the reactor pressure (D) Hydrogenate the feed stock

Last Answer : (C) Sustain the reactor pressure

An exothermic reaction takes place in an adiabatic reactor. The product temperature __________ reactor feed temperature. (A) Is always equal to (B) Is always greater than (C) Is always less than (D) May be greater or less than

Description : An exothermic reaction takes place in an adiabatic reactor. The product temperature __________ reactor feed temperature. (A) Is always equal to (B) Is always greater than (C) Is always less than (D) May be greater or less than

Last Answer : (B) Is always greater than

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Description : With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Last Answer : (A) Decreases

Higher free energy of activation of a chemical reaction (at a given temperature) implies (A) Slower rate of reaction (B) Higher rate of reaction (C) Higher equilibrium conversion (D) Both (B) and (C)

Description : Higher free energy of activation of a chemical reaction (at a given temperature) implies (A) Slower rate of reaction (B) Higher rate of reaction (C) Higher equilibrium conversion (D) Both (B) and (C)

Last Answer : (A) Slower rate of reaction

The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for parallel lines is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Description : The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for ... is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Last Answer : (A) Space time for each parallel line is same

For identical flow rate and feed composition, X plug flow reactors (PER) in series with a total volume V gives the same conversion as single (A) CSTR of volume V (B) PFR of volume V (C) CSTR of volume V/X (D) PFR of volume V/X

Description : For identical flow rate and feed composition, X plug flow reactors (PER) in series with a total volume V gives the same conversion as single (A) CSTR of volume V (B) PFR of volume V (C) CSTR of volume V/X (D) PFR of volume V/X

Last Answer : (B) PFR of volume V

Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate (C) Biuret (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Description : Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total ... (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Last Answer : (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate

The conversion of the throttle command voltage to the signal necessary to achieve the desired shaft RPM is accomplished by the _____________. A. ahead or astern function generator of the throttle control circuit B. feedback resistor of the summing amplifier circuit C. operational amplifiers in the autorotation circuit D. long time constant amplifier circuit

Description : The conversion of the throttle command voltage to the signal necessary to achieve the desired shaft RPM is accomplished by the _____________. A. ahead or astern function generator of the ... circuit C. operational amplifiers in the autorotation circuit D. long time constant amplifier circuit

Last Answer : Answer: A

A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Description : A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Last Answer : (B) Suitable for liquid phase reactions involving small production rate

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Maximum equilibrium conversion for endothermic reaction is obtained at the __________ temperature. (A) Highest possible (B) Lowest possible (C) Intermediate (D) Room

Description : Maximum equilibrium conversion for endothermic reaction is obtained at the __________ temperature. (A) Highest possible (B) Lowest possible (C) Intermediate (D) Room

Last Answer : (A) Highest possible

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA