Thermodynamic equilibrium constant in a system is affected by
(A) Inerts
(B) Pressure
(C) Temperature
(D) All (A), (B) & (C)

1 Answer

Answer :

(C) Temperature

Related questions

Description : The equilibrium constant for the reversible reaction as shown in the bellow figure, is affected by the (A) Temperature of the system (B) Presence or absence of inerts (C) Pressure of the system (D) Kinetics of the reaction

Last Answer : (C) Pressure of the system

Description : Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C ... in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Last Answer : (C) Enzymes help in increasing the activation energy of the reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Description : A system is said to be in thermodynamic equilibrium if it maintains ______ equilibrium.  A. Mechanical and phase  B. Thermal and chemical  C. Thermal, mechanical and chemical  D. Thermal, phase, mechanical and chemical

Last Answer : Thermal, phase, mechanical and chemical

Description : For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Last Answer : (C) -0.25

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

Description : What is the thermodynamic STATE function that is directly associated with a constant pressure process in which heat is exchanged between system and surroundings?

Last Answer : ANSWER: DELTA H

Description : Extensive properties of a thermodynamic system depend upon the __________ of the system. (A) Specific volume (B) Temperature (C) Mass (D) Pressure

Last Answer : (C) Mass

Description : Describe thermodynamic equilibrium with two suitable examples.

Last Answer : Thermodynamic equilibrium, condition or state of a thermodynamic system, the properties of which do not change with time and that can be changed to another condition only at the expense of effects on ... of the engine reaches the surrounding air temperature, it is said to be at thermal equilibrium. 

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

Description : Chemical potential (an intensive property) of a substance is a force that drives the chemical system to equilibrium and is equal to its partial molar properties. The ratio of chemical potential to free energy of a pure substance ... temperature and pressure is (A) 0 (B) 1 (C) ∞ (D) None of these

Last Answer : (B) 1

Description : In a reversible chemical reaction (where, Δx = number of moles of products-number of moles of reactants) (A) Addition of inert gas favours the forward reaction, when Δx is positive (B) Pressure has no effect on equilibrium, when Δn = ... any value of Δx (+ ve, - ve) or zero) (D) All 'a', 'b' & 'c'

Last Answer : D) All 'a', 'b' & 'c'

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

Description : The equilibrium constant ‘K’ of a chemical reaction depends on (A) Temperature only (B) Pressure only (C) Temperature and pressure (D) Ratio of reactants

Last Answer : (A) Temperature only

Description : With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide (A) Increases (B) Increases linearly (C) Decreases (D) Decreases linearly

Last Answer : (C) Decreases

Description : Gibbs free energy at constant pressure and temperature under equilibrium conditions is (A) ∞ (B) 0 (C) Maximum (D) Minimum

Last Answer : (D) Minimum

Description : Equilibrium constant of a reaction varies with the (A) Initial concentration of the reactant (B) Pressure (C) Temperature (D) None of these

Last Answer : C) Temperature

Description : Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With ... phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Last Answer : (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction

Description : For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Last Answer : (A) Temperature - entropy

Description : The state of a thermodynamic system is always defined by its:  a. Absolute temperature  b. process  c. properties  d. temperature and pressure

Last Answer : properties

Description : Free energy, fugacity and activity co-efficient are all affected by change in the temperature. The fugacity co-efficient of a gas at constant pressure ____with the increase of reduced temperature. (A) Decreases (B) Increases (C) Remains constant

Last Answer : (B) Increases

Description : The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Last Answer : (B) Free expansion of an ideal gas

Description : The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Last Answer : Option A

Description : Which of the following is not a thermodynamic property?  a. Pressure  b. Temperature  c. Volume  d. Phase

Last Answer : Phase

Description : Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Last Answer : Answer : a

Description : The term N.T.P. stands for  (a) nominal temperature and pressure  (b) natural temperature and pressure  (c) normal temperature and pressure  (d) normal thermodynamic practice  (e) normal thermodynamic pressure.

Last Answer : Answer : c

Description : Properties of substances like pressure, temperature and density, in thermodynamic coordinates are  (a) path functions  (b) point functions  (c) cyclic functions  (d) real functions (e) thermodynamic functions.

Last Answer : Answer : b

Description : Which of the following is a thermodynamic property of a system? (A) Concentration (B) Mass (C) Temperature (D) Entropy

Last Answer : (D) Entropy

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

Description : In an incompressible fluid, the density is (A) Greatly affected by moderate changes in pressure (B) Greatly affected only by moderate changes in temperature (C) Not affected with moderate change in temperature & pressure (D) Sensible to changes in both temperature & pressure

Last Answer : (C) Not affected with moderate change in temperature & pressure

Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Description : Measurement of thermodynamic property of temperature is facilitated by __________ law of thermodynamics. (A) 1st (B) Zeroth (C) 3rd (D) None of these

Last Answer : B) Zeroth

Description : For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant (A) Is independent of pressure (B) Increases with pressure (C) Decreases with pressure (D) Increases /decreases with pressure depending on the stoichiometric co￾efficients of the reaction

Last Answer : (B) Increases with pressure

Description : Pick out the correct statement. (A) A catalyst speeds up the forward reaction but slows shown the reverse reaction (B) Addition of catalyst changes the equilibrium constant (C) Pressure changes do not change the equilibrium concentrations (D) The composition of equilibrium is changed by catalyst

Last Answer : (C) Pressure changes do not change the equilibrium concentrations

Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100

Last Answer : (B) ∞

Description : Consider the equilibrium A(g) + B(g) = AB(g). When the partial pressure of A is 10-2 atm, the partial pressure of B is 10-3 atm and the partial pressure of AB is 1 atm, the equilibrium constant 'K' is (A) 10 atm-1 (B) 105 atm-1 (C) 10 (dimensionless) (D) 105 (dimensionless)

Last Answer : Option B

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

Description : The unit of equilibrium constant of a chemical reaction is the same as that of (A) Molar concentration (B) Temperature (C) Internal energy (D) None of these

Last Answer : (D) None of these

Description : Equilibrium constant decreases as the temperature (A) Increases, for an exothermic reaction (B) Decreases, for an exothermic reaction (C) Increases, for an endothermic reaction (D) None of these

Last Answer : (A) Increases, for an exothermic reaction

Description : What is the thermodynamic temperature scale in the English system?  A. Kelvin scale  B. Celsius scale  C. Fahrenheit scale  D. Rankine scale

Last Answer : Rankine scale

Description : What is the thermodynamic temperature scale in the SI system?  A. Kelvin scale  B. Celsius scale  C. Fahrenheit scale  D. Rankine scale

Last Answer : Kelvin scale

Description : The boundary layer is that part of a moving fluid, in which the fluid velocity is (A) Affected by the fluid flow pressure (B) Constant (C) Affected by the presence of a solid boundary (D) All (A), (B) and (C)

Last Answer : (C) Affected by the presence of a solid boundary

Description : If a two phase system is in physical equilibrium; then it means that, the (A) Escaping tendency of each component from the liquid phase to the vapor phase is exactly equal to that from vapor phase to liquid phase ... liquid phase is equal to that throughout the vapor phase (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : With the lowering of equilibrium pressure, at a given temperature, the amount of adsorbate on the adsorbent (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Last Answer : (B) Decreases

Description : At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P (D) 1/P

Last Answer : (B) √P

Description : When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Last Answer : (A) Same in both the phases

Description : When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Last Answer : (C) Same in both the phases