If a two phase system is in physical equilibrium; then it means that, the(A) Escaping tendency of each component from the liquid phase to the vaporphase is exactly equal to that from vapor phase to liquid phase(B) Temperature of the liquid phase is equal to that of the vapor phase(C) Total pressure throughout the liquid phase is equal to that throughout thevapor phase(D) All (A), (B) and (C)

If a two phase system is in physical equilibrium; then it means that, the
(A) Escaping tendency of each component from the liquid phase to the vapor
phase is exactly equal to that from vapor phase to liquid phase
(B) Temperature of the liquid phase is equal to that of the vapor phase
(C) Total pressure throughout the liquid phase is equal to that throughout the
vapor phase
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Description : When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Last Answer : (A) Same in both the phases

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Description : When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Last Answer : (C) Same in both the phases

Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of component 'B', when (A) Only vapor phase follows Raoult's law (B) Only liquid phase obeys Dalton's law (C) Liquid phase obeys Dalton's law and vapor phase obeys Raoult's law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Description : Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of ... law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Last Answer : (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase.  a. Phase Pressure  b. Equilibrium Vapor Pressure  c. Specific Pressure  d. Equilibrium Phase Pressure

Description : The pressure of the vapor phase of a substance that is in equilibrium with the liquid or solid phase.  a. Phase Pressure  b. Equilibrium Vapor Pressure  c. Specific Pressure  d. Equilibrium Phase Pressure

Last Answer : Equilibrium Vapor Pressure

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2

The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same (C) The pressure should be same in the two phases (D) The chemical potential of each component should be same in the two phases

Description : The necessary and sufficient condition for equilibrium between two phases is (A) The concentration of each component should be same in the two phases (B) The temperature of each phase should be same ( ... the two phases (D) The chemical potential of each component should be same in the two phases

Last Answer : (D) The chemical potential of each component should be same in the two phases

__________________ represents the highest pressure and highest temperature at which liquid and vapor can coexist in equilibrium.  a) Critical Point  b) Boiling Point  c) Quality Point  d) None of the above

Description : __________________ represents the highest pressure and highest temperature at which liquid and vapor can coexist in equilibrium.  a) Critical Point  b) Boiling Point  c) Quality Point  d) None of the above

Last Answer : Critical Point

Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the vapor pressure of "X" be when the volume above the liquid is 100 ml and the temperature 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

__________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Description : __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Last Answer : (A) Dew point

When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of component B (B) Vapour pressure of component A to the total pressure (C) Vapour pressure of component A to the partial pressure of A (D) Partial pressure of component A to the total pressure

Description : When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of ... to the partial pressure of A (D) Partial pressure of component A to the total pressure

Last Answer : (A) Vapour pressure of component A to that of component B

The critical temperature is the temperature: w) above which a substance cannot be vaporized x) at which the density is a minimum y) at which solid, liquid, and vapor are in equilibrium z) above which the substance cannot be liquified.

Description : The critical temperature is the temperature: w) above which a substance cannot be vaporized x) at which the density is a minimum y) at which solid, liquid, and vapor are in equilibrium z) above which the substance cannot be liquified.

Last Answer : ANSWER: Z -- ABOVE WHICH THE SUBSTANCE CANNOT BE LIQUIFIED. 

Pick out the wrong statement. (A) Cp of monatomic gases such as metallic vapor is about 5 kcal/kg.atom (B) The heat capacity of solid inorganic substance is exactly equal to the heatcapacity of the substance in the molten state(C) There is an increase in entropy, when a spontaneous change occurs in anisolated system(D) At absolute zero temperature, the heat capacity for many pure crystallinesubstances is zero

Description : Pick out the wrong statement. (A) Cp of monatomic gases such as metallic vapor is about 5 kcal/kg.atom (B) The heat capacity of solid inorganic substance is exactly equal to the ... isolated system (D) At absolute zero temperature, the heat capacity for many pure crystalline substances is zero

Last Answer : (C) There is an increase in entropy, when a spontaneous change occurs in an isolated system

The necessary condition for phase equilibrium in a multiphase system of N components is that the (A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all components should be same in a particular phase (C) Sum of the chemical potentials of any given component in all the phases should be the same (D) None of these

Description : The necessary condition for phase equilibrium in a multiphase system of N components is that the (A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all ... potentials of any given component in all the phases should be the same (D) None of these

Last Answer : (A) Chemical potentials of a given component should be equal in all phases

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Description : What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Last Answer : (C) 1

A system is in ______ equilibrium if the temperature is the same throughout the entire system.  A. Static  B. Thermal  C. Mechanical  D. Phase

Description : A system is in ______ equilibrium if the temperature is the same throughout the entire system.  A. Static  B. Thermal  C. Mechanical  D. Phase

Last Answer : Thermal

The equilibrium liquid composition compared to the vapor composition in case of Azeotropic mixture is (A) More (B) Less (C) Same (D) Either more or less; depends on the system

Description : The equilibrium liquid composition compared to the vapor composition in case of Azeotropic mixture is (A) More (B) Less (C) Same (D) Either more or less; depends on the system

Last Answer : (C) Same

What is the degree of freedom for two miscible (non-reacting) substances in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 1 (C) 2 (D) 3

Description : What is the degree of freedom for two miscible (non-reacting) substances in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

What is the number of degrees of freedom for liquid water in equilibrium with a mixture of nitrogen and water vapor? (A) 2 (B) 0 (C) 3 (D) 1

Description : What is the number of degrees of freedom for liquid water in equilibrium with a mixture of nitrogen and water vapor? (A) 2 (B) 0 (C) 3 (D) 1

Last Answer : (A) 2

Clausius-Clapeyron equation is applicable to __________ equilibrium processes. (A) Solid-vapor (B) Solid-liquid (C) Liquid-vapor (D) All (A), (B) and (C)

Description : Clausius-Clapeyron equation is applicable to __________ equilibrium processes. (A) Solid-vapor (B) Solid-liquid (C) Liquid-vapor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Description : If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Last Answer : B) Clausius-Clapeyron Equation

For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Description : The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Last Answer : (A) Less than

In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Description : In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Last Answer : (B) Higher than

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

At steam point, the temperature of water and its vapor at standard pressure are:  a. Extremes or maximum  b. unity  c. in equilibrium  d. undefined

Description : At steam point, the temperature of water and its vapor at standard pressure are:  a. Extremes or maximum  b. unity  c. in equilibrium  d. undefined

Last Answer : in equilibrium

What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

_________is the partial pressure of water vapor at the existing temperature divided by the equilibrium vapor pressure of water at the existing temperature.  a. vacuum pressure  b. relative humidity  c. absolute pressure  d. vapor pressure

Description : _________is the partial pressure of water vapor at the existing temperature divided by the equilibrium vapor pressure of water at the existing temperature.  a. vacuum pressure  b. relative humidity  c. absolute pressure  d. vapor pressure

Last Answer : relative humidity

In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because(A) Temperature is less(B) Total pressure is less(C) Mixing of steam with the material being vaporised is not so intimate asto result in equilibrium condition(D) Saturated steam is used for steam distillation

Description : In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because (A) Temperature is less (B) Total pressure is less (C) Mixing of steam ... not so intimate as to result in equilibrium condition (D) Saturated steam is used for steam distillation

Last Answer : (C) Mixing of steam with the material being vaporised is not so intimate as to result in equilibrium condition

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution is proportional to the mole fraction in the vapour (C) Vapour pressure is equal to the product of the mole fraction and total pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Description : Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution ... pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Last Answer : (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid

Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Description : Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Last Answer : (A) Unbound

A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C. 2.54 kg  D. 3.16 kg Formula: from the steam table at 600kPa vƒ = 0.001101 m^3 / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Last Answer : 3.16 kg

The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Description : The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Last Answer : normal boiling point

For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Description : For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Last Answer : (B) Increases

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

If escaping danger means teaming up with a social pariah, would you?

Description : If escaping danger means teaming up with a social pariah, would you?

Last Answer : I go alone. The guy stays to defend the plane.

In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Description : In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Last Answer : (B) 1/KG = 1/KG + m/KL

The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of gases in the furnace (mixing by induction, by acceleration or by change of direction) (D) All (A), (B) and (C)

Description : The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of ... , by acceleration or by change of direction) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)