In an ammonia plant, the purge off is essential to (A) Maintain inert gas concentration within a limit (B) Remove excess poisonous gases (C) Maintain H2 : N2 ratio at 3 :1 (D) Remove uncondensed ammonia vapour

In an ammonia plant, the purge off is essential to
(A) Maintain inert gas concentration within a limit
(B) Remove excess poisonous gases
(C) Maintain H2
: N2
ratio at 3 :1
(D) Remove uncondensed ammonia vapour
by

1 Answer

Answer :

(C) Maintain H2
: N2
ratio at 3 :1
by

Related questions

Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Description : Which of the following can be regarded as gas so that gas laws could be applicable, within the commonly encountered temperature limits.  (a) 02, N2, steam, C02  (b) Oz, N2, water vapour  (c) S02, NH3, C02, moisture  (d) 02, N2, H2, air  (e) steam vapours, H2, C02.

Last Answer : Answer : d

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor(C) Cannot use coking coal(D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Description : Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Last Answer : (C) Remove condensate and inert gases

The essential ingredient of all the synthesis gas is (A) H2 (B) O2 (C) CO2 (D) N2

Description : The essential ingredient of all the synthesis gas is (A) H2 (B) O2 (C) CO2 (D) N2

Last Answer : (A) H

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

Vent pipes are provided in a condenser to (A) Remove non-condensable gases (B) Purge the condenser (C) Facilitate easy cleaning of tubes (D) None of these

Description : Vent pipes are provided in a condenser to (A) Remove non-condensable gases (B) Purge the condenser (C) Facilitate easy cleaning of tubes (D) None of these

Last Answer : (A) Remove non-condensable gases

What is the maximum amount of NH3 gas formed by mixing of 14 g N2 and 6 g H2 gases is?

Description : What is the maximum amount of NH3 gas formed by mixing of 14 g N2 and 6 g H2 gases is?

Last Answer : N2(g) + 3H2(g) ==> 2NH3(g) is the balanced equation for thisreaction.14 g N2 x 1 mole N2/28 g = 0.5 moles N2 present6 g H2 x 1 mole H2/2 g = 3 moles O2 presentIn this situation, the amount of N2 ... by the amount of N2.0.5 moles N2 x 2 moles NH3/1 mole N2 = 1 moles NH3 is themaximum amount of NH3.

Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Description : Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Last Answer : (A) N2

Green house gases blanket/block the infrared radiation from earth's surface to the atmosphere leading to its progressive warming up. Which of the following gases does not exhibit green house effect? (A) CO2 (B) H2 (C) SO3 (D) N2

Description : Green house gases blanket/block the infrared radiation from earth's surface to the atmosphere leading to its progressive warming up. Which of the following gases does not exhibit green house effect? (A) CO2 (B) H2 (C) SO3 (D) N2

Last Answer : (C) SO3

How many moles of H2 and N2 can be formed by the decomposition of 0.145 moles of ammonia, NH3?

Description : How many moles of H2 and N2 can be formed by the decomposition of 0.145 moles of ammonia, NH3?

Last Answer : All together now… WE WILL NOT DO YOUR HOMEWORK

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

Which of the following gases will effuse out of football bladder most wieldy? (1) He (2) H2 (3) N2 (4) 02

Description : Which of the following gases will effuse out of football bladder most wieldy? (1) He (2) H2 (3) N2 (4) 02

Last Answer : (2) H2 Explanation: Hydrogen is a chemical element with symbol H and atomic number 1. With an average atomic weight of 1.00794 u (1.007825 u for hydrogen-1), hydrogen is the lightest ... forms covalent compounds with most elements and is present in the-water molecule and in most organic compounds.

All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Description : All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Last Answer : (B) H2

Which of the following gases will effuse out of football bladder most quickly ? (1) He (2) H2 (3) N2 (4) O2

Description : Which of the following gases will effuse out of football bladder most quickly ? (1) He (2) H2 (3) N2 (4) O2

Last Answer :  H2

Which of the following gases is having the widest explosion limit (about 2 to 81% gas in gas-air mixture), rendering it the property of the most explosive gas? (A) Hydrogen (B) Acetylene (C) Carbon monoxide (D) Ammonia

Description : Which of the following gases is having the widest explosion limit (about 2 to 81% gas in gas-air mixture), rendering it the property of the most explosive gas? (A) Hydrogen (B) Acetylene (C) Carbon monoxide (D) Ammonia

Last Answer : (B) Acetylene

In the reaction, H2 +I2 ⇌ 2HI, addition of an inert gas will (A) Increase the partial pressure of H2 (B) Increase the partial pressure of I2 (C) Increase the total pressure and hence shift the equilibrium towards the right (D) Not affect the equilibrium conditions

Description : In the reaction, H2 +I2 ⇌ 2HI, addition of an inert gas will (A) Increase the partial pressure of H2 (B) Increase the partial pressure of I2 (C) Increase the total pressure and hence shift the equilibrium towards the right (D) Not affect the equilibrium conditions

Last Answer : (D) Not affect the equilibrium conditions Share

Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Description : Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Last Answer : (A) 95% N2 + 5% H2

The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Description : The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Last Answer : (A) y

. Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Description : . Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Last Answer : (A) CO & H2

Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Description : Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Last Answer : (A) N2

Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Description : Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Last Answer : (A) CO & N2

Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Description : Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Last Answer : (B) CO, H2 & CH4

Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Description : Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Last Answer : (C) N2 & CO

Largest constituent of coke oven gas is (A) N2 (B) H2 (C) CH4 (D) CO

Description : Largest constituent of coke oven gas is (A) N2 (B) H2 (C) CH4 (D) CO

Last Answer : (B) H2

Main component of sewage gas produced during anaerobic decomposition of organic waste (by suitable bacteria) during sewage disposal is (A) H2 (B) CH4 (C) CO2 (D) N2

Description : Main component of sewage gas produced during anaerobic decomposition of organic waste (by suitable bacteria) during sewage disposal is (A) H2 (B) CH4 (C) CO2 (D) N2

Last Answer : (B) CH4

__________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2(C) CO2(D) He

Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He

Last Answer : (A) N2

Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Description : Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Last Answer : (C) CO & H2

Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Description : Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Last Answer : (A) CO, CO2 N2 , H2

High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Description : Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Last Answer : (A) CO and H2

Which of the following behaves most closely like an ideal gas? (A) He (B) N2 (C) O2 (D) H2

Description : Which of the following behaves most closely like an ideal gas? (A) He (B) N2 (C) O2 (D) H2

Last Answer : (A) He

Naphtha in a fertiliser plant is used as a source of (A) Fuel (B) H2 (C) N2 (D) O2

Description : Naphtha in a fertiliser plant is used as a source of (A) Fuel (B) H2 (C) N2 (D) O2

Last Answer : (B) H2

Clapeyron Equation deals with the (A) Rate of change of vapour pressure with temperature (B) Effect of an inert gas on vapour pressure (C) Calculation of ΔF for spontaneous phase change (D) Temperature dependence of heat of phase transition

Description : Clapeyron Equation deals with the (A) Rate of change of vapour pressure with temperature (B) Effect of an inert gas on vapour pressure (C) Calculation of ΔF for spontaneous phase change (D) Temperature dependence of heat of phase transition

Last Answer : (A) Rate of change of vapour pressure with temperature

At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Description : Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Last Answer : Ans:(a)

Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Description : Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Last Answer : CO, N2 and H2.

A green house gas is a) H2 b) CO c) CO2 d) N2.

Description : A green house gas is a) H2 b) CO c) CO2 d) N2.

Last Answer : c) CO2

A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6.26, CO : 1.56, O2 : 3.91, H2O :15.66, N2 : 72.60 (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02 (C) CO2 : 6.39, CO : 1.60, O2 : 3.99, H2O:25.96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Description : A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6 ... 96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Last Answer : (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02

Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion (B) Nitrogen percentage in the fuel is very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Description : Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion ... very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Last Answer : (C) Excess air has been used for combustion

Systemic insecticides (A) Are absorbed throughout the plant (B) Kill insects following external bodily contact (C) Are stomach poisons (D) Emit poisonous vapour

Description : Systemic insecticides (A) Are absorbed throughout the plant (B) Kill insects following external bodily contact (C) Are stomach poisons (D) Emit poisonous vapour

Last Answer : (A) Are absorbed throughout the plant

. Fumigant insecticides (A) Kill insects, when they eat it (B) Emit poisonous vapour (C) Are absorbed throughout the plant (D) None of these

Description : . Fumigant insecticides (A) Kill insects, when they eat it (B) Emit poisonous vapour (C) Are absorbed throughout the plant (D) None of these

Last Answer : (B) Emit poisonous vapour

Pick up the incorrect statement (a) lithium bromide used in vapour absorption cycle is nonvolatile (b) lithium bromide plant can't operate below 0°C (c) a separator is used in lithium bromide plant to remove the unwanted water vapour by condensing (d) concentration of solution coming out of lithium bromide generator is more in comparison to that entering the generator

Description : Pick up the incorrect statement (a) lithium bromide used in vapour absorption cycle is nonvolatile (b) lithium bromide plant can't operate below 0°C (c) a separator is used in lithium ... of solution coming out of lithium bromide generator is more in comparison to that entering the generator

Last Answer : Ans: c

Give Reason (i)N2 is inert at room temperature. (ii) Overlapping of S orbital with any other orbital forms sigma bonds.

Description : Give Reason (i)N2 is inert at room temperature. (ii) Overlapping of S orbital with any other orbital forms sigma bonds.

Last Answer : Ans .Due to high bond order (3) , it has high bond dissociation energy ,which is not possible at room temperature (ii)Because s orbital has same electron distribution in all axis/ directions

In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Description : In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Last Answer : (C) H2 content in the coke oven gas is more

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven gas(B) Steam reforming of naphtha(C) Cracking of natural gas(D) Electrolysis of water

Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water

Last Answer : (D) Electrolysis of water

Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Description : Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Last Answer : (A) H2

Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Description : Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Last Answer : (B) CO2 , H2 and N2