Vent pipes are provided in a condenser to (A) Remove non-condensable gases (B) Purge the condenser (C) Facilitate easy cleaning of tubes (D) None of these

Vent pipes are provided in a condenser to
(A) Remove non-condensable gases
(B) Purge the condenser
(C) Facilitate easy cleaning of tubes
(D) None of these
by

1 Answer

Answer :

(A) Remove non-condensable gases
by

Related questions

The purpose of providing bleed points in the evaporator is to (A) Admit the feed (B) Remove the product (C) Facilitate removal of non-condensable gases (D) Create vacuum

Description : The purpose of providing bleed points in the evaporator is to (A) Admit the feed (B) Remove the product (C) Facilitate removal of non-condensable gases (D) Create vacuum

Last Answer : (C) Facilitate removal of non-condensable gases

The purpose of providing a 'catchall' in the vapor line of an evaporator is to (A) Create vacuum (B) Regulate the vapor flow (C) Vent the non-condensable gases (D) Arrest the entrained liquid

Description : The purpose of providing a 'catchall' in the vapor line of an evaporator is to (A) Create vacuum (B) Regulate the vapor flow (C) Vent the non-condensable gases (D) Arrest the entrained liquid

Last Answer : (D) Arrest the entrained liquid

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The main function of baffles provided in a shell and tube heat exchanger is to (A) Facilitate the cleaning of outer tube surface (B) Enhance turbulence (C) Hold the tubes in position (D) All 'a', 'b' & 'c'

Description : The main function of baffles provided in a shell and tube heat exchanger is to (A) Facilitate the cleaning of outer tube surface (B) Enhance turbulence (C) Hold the tubes in position (D) All 'a', 'b' & 'c'

Last Answer : (B) Enhance turbulence

The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Description : The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Description : Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Last Answer : (B) Reduce the water hammer

The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during feed water treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler

In an ammonia plant, the purge off is essential to (A) Maintain inert gas concentration within a limit (B) Remove excess poisonous gases (C) Maintain H2 : N2 ratio at 3 :1 (D) Remove uncondensed ammonia vapour

Description : In an ammonia plant, the purge off is essential to (A) Maintain inert gas concentration within a limit (B) Remove excess poisonous gases (C) Maintain H2 : N2 ratio at 3 :1 (D) Remove uncondensed ammonia vapour

Last Answer : (C) Maintain H2 : N2 ratio at 3 :1

Trap is used to remove __________ from steam pipe lines. (A) Steam (B) Condensate (C) Non-condensable (D) None of these

Description : Trap is used to remove __________ from steam pipe lines. (A) Steam (B) Condensate (C) Non-condensable (D) None of these

Last Answer : (B) Condensate

The condensing pressure due to the presence of non-condensable gases, as compared to that actually required forcondensing temperatures without non-condensable gases, (a) will be higher (b) will be lower (c) will remain unaffected (d) may be higher or lower depending upon the nature of non-condensable gases

Description : The condensing pressure due to the presence of non-condensable gases, as compared to that actually required forcondensing temperatures without non-condensable gases, (a) will be higher (b) will be ... remain unaffected (d) may be higher or lower depending upon the nature of non-condensable gases

Last Answer : Ans: a

In a heat exchanger, floating head is provided to (A) Facilitate cleaning of the exchanger (B) Increase the heat transfer area (C) Relieve stresses caused by thermal expansion (D) Increase log mean temperature gradient

Description : In a heat exchanger, floating head is provided to (A) Facilitate cleaning of the exchanger (B) Increase the heat transfer area (C) Relieve stresses caused by thermal expansion (D) Increase log mean temperature gradient

Last Answer : (C) Relieve stresses caused by thermal expansion

Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C. Septic tanks are completely covered and high vent shafts are provided for the escape of foul gases D. None of these

Description : Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C ... covered and high vent shafts are provided for the escape of foul gases D. None of these

Last Answer : ANS: D

Does anyone know where I can get a free cleaning of my purge valve soleniod?

Description : Does anyone know where I can get a free cleaning of my purge valve soleniod?

Last Answer : Those usually get replaced. Why do you think you need it? Engine code?

The purpose of floating head in a heat exchanger is to (A) Avoid buckling of tubes (B) Provide support for tubes (C) Decrease the pressure drop (D) Facilitate its lengthening, if needed

Description : The purpose of floating head in a heat exchanger is to (A) Avoid buckling of tubes (B) Provide support for tubes (C) Decrease the pressure drop (D) Facilitate its lengthening, if needed

Last Answer : (A) Avoid buckling of tubes

What if a bathroom doesn't have vent pipes on the roof above it?

Description : What if a bathroom doesn't have vent pipes on the roof above it?

Last Answer : answer:You can vent them in a different way: http://en.wikipedia.org/wiki/Drain-waste-vent_system However, the traps should still be keeping that smell out. Maybe there’s gunk in the traps? Edited: this link: http://en.wikipedia.org/wiki/Drain-waste-vent_system#Air_admittance_valve

Condenser tubes are not made of (A) Cartridge brass (B) Muntz brass (C) Wood metal (D) Aluminium brass alloy

Description : Condenser tubes are not made of (A) Cartridge brass (B) Muntz brass (C) Wood metal (D) Aluminium brass alloy

Last Answer : (C) Wood metal

The bank of tubes located at the back of the domestic refrigerators are the __________ tubes. (A) Refrigerant cooling (B) Evaporator (C) Condenser (D) Throttling

Description : The bank of tubes located at the back of the domestic refrigerators are the __________ tubes. (A) Refrigerant cooling (B) Evaporator (C) Condenser (D) Throttling

Last Answer : C) Condenser

Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10

Description : Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10

Last Answer : (A) 70 & 30

Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Description : Which of the following is the most suitable material of construction for the condenser tubes, where the cooling medium is brine (salty water)? (A) Aluminium (B) Copper (C) Titanium (D) Stainless steel

Last Answer : Option C

Vapour which is at a pressure smaller than the saturation pressure for the temperature involved is called a __________ vapour. (A) Superheated (B) Desuperheated (C) Non-condensable (D) None of these

Description : Vapour which is at a pressure smaller than the saturation pressure for the temperature involved is called a __________ vapour. (A) Superheated (B) Desuperheated (C) Non-condensable (D) None of these

Last Answer : (A) Superheated

For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass

Description : For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass

Last Answer : Ans: c

The bank of tubes at the back of domestic refrigerator are (a) condenser tubes (b) evaporator tubes (c) refrigerant cooling tubes (d) capillary tubes

Description : The bank of tubes at the back of domestic refrigerator are (a) condenser tubes (b) evaporator tubes (c) refrigerant cooling tubes (d) capillary tubes

Last Answer : Ans: a

By which material condenser tubes are made?

Description : By which material condenser tubes are made?

Last Answer : Condenser tubes are made up of aluminium brass.  

Plastic tubes & pipes are generally made by __________ moulding. (A) Injection (B) Transfer (C) Extrusion (D) Compression

Description : Plastic tubes & pipes are generally made by __________ moulding. (A) Injection (B) Transfer (C) Extrusion (D) Compression

Last Answer : (C) Extrusion

Which of the following accessories is provided in the vapor line of an evaporator for removing the entrained liquid? (A) Bleed point (B) Vent (C) Catchall (D) Baffle

Description : Which of the following accessories is provided in the vapor line of an evaporator for removing the entrained liquid? (A) Bleed point (B) Vent (C) Catchall (D) Baffle

Last Answer : (C) Catchall

Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass

Last Answer : Option A

Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Description : Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Last Answer : (C) Remove condensate and inert gases

Is getting somebody to do dryer vent cleaning necessary, or can I do that myself?

Description : Is getting somebody to do dryer vent cleaning necessary, or can I do that myself?

Last Answer : Cleaning a dryer vent is not difficult, though it does depend on your skills. You must remove the vent hose and remove any collected lint and debris from around the connections, both from the dryer ... a handyman/woman. Check out this how-to: http://www.ehow.com/how_2064584_clean-dryer-vent.html

What type of company should I call for dryer vent cleaning?

Description : What type of company should I call for dryer vent cleaning?

Last Answer : Dryer vent cleaning is often done by the same companies that repair your air conditioning system. You may also want to try checking out steam cleaners as some carpet/steam cleaning companies also offer this service.

Each cell has a vent cap A. To allow gases out when the cell is on charge B. To add water to the cell if needed C. To check the level of electrolyte D. To do all above functions

Description : Each cell has a vent cap A. To allow gases out when the cell is on charge B. To add water to the cell if needed C. To check the level of electrolyte D. To do all above functions

Last Answer : D. To do all above functions

How do a pipes and tubes can be differ?

Description : How do a pipes and tubes can be differ?

Last Answer : Pipes and Tubes may look similar, they are in fact quite different in nomenclature and sizing. Remember that pipes and tubes are rarely interchangeable.The difference between pipe and tube include: ... outer dimensions of the pipe. Tube measurements, on the other hand, are provided as a

How is water circulated throughout the dry cooling tower system? a. Finned tubes b. Metal pipes c. Porous tubes d. Swifting tubes

Description : How is water circulated throughout the dry cooling tower system? a. Finned tubes b. Metal pipes c. Porous tubes d. Swifting tubes

Last Answer : a. Finned tubes

How is water circulated throughout the dry cooling tower system? A] Finned tubes. B] Metal pipes C] Porous tubes. D] Swirling tubes

Description : How is water circulated throughout the dry cooling tower system? A] Finned tubes. B] Metal pipes C] Porous tubes. D] Swirling tubes

Last Answer : A] Finned tubes.

Width of the coke oven towards coke side is slightly more than that on pusher side to (A) Facilitate easy discharging of coke as it swells during carbonisation (B) Facilitate uniform heating of the oven (C) Increase the output of the coke (D) None of these

Description : Width of the coke oven towards coke side is slightly more than that on pusher side to (A) Facilitate easy discharging of coke as it swells during carbonisation (B) Facilitate uniform heating of the oven (C) Increase the output of the coke (D) None of these

Last Answer : (A) Facilitate easy discharging of coke as it swells during carbonisation

Coal is pulverised before burning in large capacity boiler furnaces mainly to (A) Ensure its complete combustion (B) Facilitate easy ash removal (C) Enhance its calorific value (D) Provide trouble free operation

Description : Coal is pulverised before burning in large capacity boiler furnaces mainly to (A) Ensure its complete combustion (B) Facilitate easy ash removal (C) Enhance its calorific value (D) Provide trouble free operation

Last Answer : (A) Ensure its complete combustion

The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Description : The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Last Answer : (A) Permit the use of alum as a coagulant

How to remove bees from the dryer vent

Description : How to remove bees from the dryer vent

Last Answer : Need Answer

Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Description : Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Last Answer : Option A

Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Description : Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Last Answer : Option A

The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Description : The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Last Answer : (d) to maintain the balls at a fixed distance apart

Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane (C) Its graduations are in whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Description : Prismatic compass is considered more accurate than a surveyor's compass, because (A) It is provided with a better magnetic needle (B) It is provided with a sliding glass in the object vane ( ... whole circle bearings (D) It is provided with a prism to facilitate reading of its graduated circle

Last Answer : (D) It is provided with a prism to facilitate reading of its graduated circle

Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Description : Baffles provided on the shell side of a shell and tube heat exchanger are meant for (A) Providing support for the tubes (B) Improving heat transfer (C) Both 'a' & 'b' (D) Preventing the fouling of tubes & stagnation of shell side fluid

Last Answer : C) Both 'a' & 'b'

During the process of isolation of DNA, chilled ethanol is added to (a) precipitate DNA (b) break open the cell to release DNA (c) facilitate action of restriction enzymes (d) remove proteins such as histones.

Description : During the process of isolation of DNA, chilled ethanol is added to (a) precipitate DNA (b) break open the cell to release DNA (c) facilitate action of restriction enzymes (d) remove proteins such as histones.

Last Answer : a) precipitate DNA

(a) “The breathing cycle is rhythmic whereas exchange of gases is a continuous process”. Justify this statement. (b) What happens if conducting tubes of circulatory system develops a leak? State in brief, how could this be avoided? (c) How opening and closing of stomata takes place? -Biology

Description : (a) “The breathing cycle is rhythmic whereas exchange of gases is a continuous process”. Justify this statement. (b) What happens if conducting tubes of circulatory system develops a leak? State in brief, how could this be avoided? (c) How opening and closing of stomata takes place? -Biology

Last Answer : (a) The breathing cycle involves inhalation and exhalation of air due to alternate expansion and contraction of thoracic cavity. Thus it is a rhythmic process. But exchange of gases is a continuous process ... pore opens up. When water moves out the guard cells shrinks and the stomatal pore closes.

Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Description : Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Last Answer : a) Flue gases pass through tubes and water around it

Water tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Description : Water tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Last Answer : b) Water passes through the tubes and flue gases around it

Is there any way to remove residual product left in pipes after a batch operation?

Description : Is there any way to remove residual product left in pipes after a batch operation?

Last Answer : OEG Company in Osaka, Japan commercialized a device called Pushkun that runs through pipes and pushes out left over product. The system is particularly valuable in batch operations where product recovery is ... depend on the scale of the system, but are typically around $10,000 US (1998).

Do you purge your cabinets? Kitchen and Bathroom? If so, how often?

Description : Do you purge your cabinets? Kitchen and Bathroom? If so, how often?

Last Answer : Never. I have so minimal stuff that I never have to clear out the 3½ cabinets I take up. My desk, however, gets frequent purging.

Have any of you seen the movie The Purge?

Description : Have any of you seen the movie The Purge?

Last Answer : answer:“The Purge is supposed to cut down on crime and unemployment. Do you think this would really work in the real world?” Who cares? I wouldn’t want to live in a society like that. It doesn’t matter whether it would cut down crime and unemployment. The cost is too high.