Brownian movement is prominent in the particle size range of
__________ microns in case of settling of a particle in a fluid.
(A) 2 to 3
(B) 0.01 to 0.10
(C) 200 to 300
(D) 100 to 1000

1 Answer

Answer :

A) 2 to 3

Related questions

Description : Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns. (A) < 5 (B) 10 to 25 (C) < 74 (D) > 1000

Last Answer : (C) < 74

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

Description : A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) ... ) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Last Answer : (B) One fourth as that of A

Description : Electro-magnetic spectrum range, which is important for radiation varies from __________ microns. (A) 1 to 100 (B) 0.5 to 50 (C) 10 to 100 (D) 100 to 1000

Last Answer : (B) 0.5 to 50

Description : The range of electromagnetic spectrum important in heat transfer by radiation is __________ microns. (A) 0.38-0.78 (B) 0.5-50 (C) 100-1000 (D) 5-50

Last Answer : (B) 0.5-50

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

Description : Forces acting on a particle settling in fluid are __________ forces. (A) Gravitational & buoyant (B) Centrifugal & drag (C) Gravitational or centrifugal buoyant drag (D) External, drag & viscous

Last Answer : (C) Gravitational or centrifugal buoyant drag

Description : 200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Last Answer : (B) 74

Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Last Answer : (C) 1000-10000

Description : For the free settling of a spherical particle through a fluid, the slope of, CD-log NRe , plot is (A) 1 (B) -1 (C) 0.5 (D) -0.5

Last Answer : (B) -1

Description : Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C. (A) 0.0001 (B) 0.001 (C) 0.01 (D) 0.1

Last Answer : (B) 0.001

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

Description : For motion of spherical particles in a stationary fluid, the drag co￾efficient in hindered settling compared to that in free settling is (A) More (B) Less (C) Equal (D) More or less, depending on the type of particle

Last Answer : (A) More

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

Description : The settling velocity of a spherical particle of diameter less than 0.1 mm as per Stock’s law, is A. Vs = 418 (Gs – Gw) d [(3T + 70)/100] B. Vs = 418 (Gs – Gw)d² [(3T + 70)/100] C. Vs = 218 (Gs – Gw)d² [(3T + 70)/100] D. Vs = 218 (Gs – Gw)d [(3T + 70)/100]

Last Answer : ANS: B

Description : In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Last Answer : (B) Secondary

Description : The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Last Answer : Answer : D

Description : Which of the following is correct IPv4 address? a. 124.201.3.1.52 b. 01.200.128.123 c. 300.142.210.64 d. 128.64.0.0

Last Answer : d. 128.64.0.0

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : With decrease in particle size to be fluidised by a particular fluid, the operating range of fluidisation velocity (A) Widens (B) Squeezes (C) Does not change (D) Unpredictable from the data

Last Answer : (C) Does not change

Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Last Answer : (D) 1000-1100

Description : Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Last Answer : (D) 200 mesh screen has 200 openings per linear cm

Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Last Answer : (B) 200-300

Description : In Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass varies as the __________ of its diameter. (A) Inverse (B) Square root (C) Second power (D) First power

Last Answer : (B) Square root

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

Description : Two particles are called to be equal settling, if they are having the same. (A) Size (B) Specific gravity (C) Terminal velocities in the same fluid & in the same field of force (D) None of these

Last Answer : (C) Terminal velocities in the same fluid & in the same field of force

Description : Stoke's equation is valid in the Reynolds number range (A) 0.01 to 0.1 (B) 0.1 to 2 (C) 2 to 10 (D) 10 to 100

Last Answer : (A) 0.01 to 0.1

Description : What is the name of the electromagnetic radiation in the range of 0.4 to 0.7 microns?

Last Answer : ANSWER: VISIBLE LIGHT

Description : The random motion of particles suspended in a fluid is called: w) Boson Condensation x) Fermi Motion y) Brownian Motion z) Pauli Motion

Last Answer : ANSWER: Y -- BROWNIAN MOTION

Description : In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the __________ crushing. (A) Secondary (B) Fine (C) Primary (D) Ultrafine

Last Answer : (C) Primary

Description : Insensible loss of body water of normal adult is about (A) 50–100 ml (B) 100–200 ml (C) 300–500 ml (D) 600–1000 ml

Last Answer : Answer : D

Description : The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml

Last Answer : Answer : C

Description : In glycinuria daily urinary excretion of glycine ranges from (A) 100–200 mg (B) 300–500 mg (C) 600–1000 mg (D) 1100–1400 mg

Last Answer : Answer : C

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

Description : Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation. (A) Clarification (B) Sedimentation (C) Flocculation (D) Classification

Last Answer : (D) Classification

Description : Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Last Answer : (A) < 1

Description : Defination of Brownian Movement

Last Answer : Brownian Movement : The continuous zig zag motion of dispersed phase in dispersion medium is called Brownian Movement. It is due to the unbalanced bombardment of the particles by the molecules of the dispersion medium.

Description : What is the process called, when cells will move toward attractants and away from danger? a. run and tumble b. chemotaxis c. Brownian movement d. gliding

Last Answer : b. chemotaxis

Description : Explain Brownian Movement.

Last Answer : Ans : Brownian Movement : In 1827 British botanist Robert Brown explained Brownian movement as. Statement : “A continuous , rapid , zigzag motion of suspended particles through the medium is called Brownian motion”. Example : Movement of pollen grains in water molecules observed in microscope.

Description : For which particles Brownian movement was firstly studied?

Last Answer : This was firstly studied by Brown for the motion of pollen grains in water.

Description : What is the range of the visible light cure beam: A. 100-120 nm B. 200-300 nm C. 400-430 nm D. 470 nm or 450-500 nm

Last Answer : D. 470 nm or 450-500 nm

Description : In Newton's law range, the drag co-efficient for the motion of spherical particle in a stationary fluid is (A) 0.44 (B) 0.044 (C) 4.4 (D) 44

Last Answer : (A) 0.44

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

Description : Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : c. 100-150 lit