Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue

Which of the following is the most suitable feed for platforming process
(reforming)?
(A) Olefinic hydrocarbon
(B) Naphtha
(C) Fuel oil
(D) Atmospheric residue
by

1 Answer

Answer :

(A) Olefinic hydrocarbon
by

Related questions

Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Description : Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Last Answer : (B) Vacuum residue

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha

Description : Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha

Last Answer : (A) Combustion of sulphur

Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Description : Which of the following is a non-regenerative fixed bed catalytic reforming process? (A) Hydroforming (B) Thermofor catalytic reforming (C) Platforming (D) Hyperforming

Last Answer : (C) Platforming

. Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Description : . Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha

Description : Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha

Last Answer : (A) Semet-Solvay process

Which of the following fractions of petroleum contains maximum sulphur? (A) Diesel (B) Gasoline (C) Naphtha (D) Atmospheric residue

Description : Which of the following fractions of petroleum contains maximum sulphur? (A) Diesel (B) Gasoline (C) Naphtha (D) Atmospheric residue

Last Answer : (D) Atmospheric residue

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Last Answer : (C) Straight run gasoline

Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Description : Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1

Last Answer : (B) 3.5 : 1

Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Last Answer : (B) Endothermic

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Last Answer : (C) Nickel oxide on alumina support

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Description : Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven gas(B) Steam reforming of naphtha(C) Cracking of natural gas(D) Electrolysis of water

Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water

Last Answer : (D) Electrolysis of water

Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Last Answer : (A) Nickel

Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Description : Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Last Answer : (A) Iron-steam reaction

Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Last Answer : (C) Electrolysis of water

Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Description : Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming

Last Answer : (D) Steam reforming

Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Description : Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Last Answer : (C) Produces fuel oil of lower viscosity

Which of the following has the highest viscosity of all (at a given temperature)? (A) Naphtha (B) Fuel oil (C) Light diesel oil (D) Petrol

Description : Which of the following has the highest viscosity of all (at a given temperature)? (A) Naphtha (B) Fuel oil (C) Light diesel oil (D) Petrol

Last Answer : (B) Fuel oil

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil

Description : Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil

Last Answer : (B) Gasoline

Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Description : Ammonia synthesis gas is produced from fuel oil by (A) Steam reforming (B) Hydro-cracking (C) Partial oxidation (D) Hydrogenation

Last Answer : (C) Partial oxidation

Platforming is a __________ process. (A) Moving bed (B) Fluidised bed (C) Non-regenerative & fixed bed (D) Regenerative

Description : Platforming is a __________ process. (A) Moving bed (B) Fluidised bed (C) Non-regenerative & fixed bed (D) Regenerative

Last Answer : (C) Non-regenerative & fixed bed

Which of the following is not a commercially used feed-stock for the production of ammonia synthesis gas? (A) Water (B) Naphtha (C) Tar (D) Coal/coke oven gas

Description : Which of the following is not a commercially used feed-stock for the production of ammonia synthesis gas? (A) Water (B) Naphtha (C) Tar (D) Coal/coke oven gas

Last Answer : (C) Tar

Which of the following compound have maximum number of olefinic bond :-

Description : Which of the following compound have maximum number of olefinic bond :-

Last Answer : Which of the following compound have maximum number of olefinic bond :- A. `H_(2)C= CH-CH=O` B. `HO-underset(O) ... =CH_(2)` D. `H_(3)C-C-=C-CH_(3)`

Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Description : Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Last Answer : (C) Cleveland (open cup type)

Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of(A) Thermal cracking(B) Gum formation(C) Coking(D) Discoloration

Description : Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of (A) Thermal cracking (B) Gum formation (C) Coking (D) Discoloration

Last Answer : (C) Coking

Naphtha in a fertiliser plant is used as a source of (A) Fuel (B) H2 (C) N2 (D) O2

Description : Naphtha in a fertiliser plant is used as a source of (A) Fuel (B) H2 (C) N2 (D) O2

Last Answer : (B) H2

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

High concentration of carcinogenic hydrocarbon pollutants in atmospheric air causes (A) Cancer (B) Silicosis (C) Respiratory disease (e.g., asthma) (D) Reduced crop yield

Description : High concentration of carcinogenic hydrocarbon pollutants in atmospheric air causes (A) Cancer (B) Silicosis (C) Respiratory disease (e.g., asthma) (D) Reduced crop yield

Last Answer : (A) Cancer

The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Description : The most suitable solvent for deasphalting vacuum residue is (A) Propane (B) Methyl ethyl ketone (C) Doctor's solution (D) Methanol amine

Last Answer : (B) Methyl ethyl ketone

Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Description : Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Last Answer : (A) Charcoal

Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Description : Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Last Answer : (A) Charcoal

Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Naphtha yield in straight run distillation of crude oil may be about__________ percent.(A) 2(B) 6(C) 12(D) 18

Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18

Last Answer : (B) 6

Which of the following petroleum products contain minimum sulphur? (A) Naphtha (B) Kerosene (C) LSHS (D) Furnace oil

Description : Which of the following petroleum products contain minimum sulphur? (A) Naphtha (B) Kerosene (C) LSHS (D) Furnace oil

Last Answer : (A) Naphtha

. C/H ratio is the minimum in case of (A) Furnace oil (B) Natural gas (C) Coal (D) Naphtha

Description : . C/H ratio is the minimum in case of (A) Furnace oil (B) Natural gas (C) Coal (D) Naphtha

Last Answer : (B) Natural gas

C/H ratio is the maximum in case of (A) Coal (B) Furnace oil (C) Natural gas (D) Naphtha

Description : C/H ratio is the maximum in case of (A) Coal (B) Furnace oil (C) Natural gas (D) Naphtha

Last Answer : (A) Coal

Is it all right to feed my kitten Adult low-residue cat food?

Description : Is it all right to feed my kitten Adult low-residue cat food?

Last Answer : sure we fed our cat purina cat chow from kitten until his death. He was always healthy and lived to be 14 years old.

Which one of the following is normally not an atmospheric pollutant ? a) CO b) CO2 c) SO2 d) Hydrocarbon.

Description : Which one of the following is normally not an atmospheric pollutant ? a) CO b) CO2 c) SO2 d) Hydrocarbon.

Last Answer : b) CO2

In a furnace operation, which is not preheated? (A) Solid fuels (B) Hydrocarbon containing fuel gases (e.g. coke oven gas, refinery gas etc.) (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a furnace operation, which is not preheated? (A) Solid fuels (B) Hydrocarbon containing fuel gases (e.g. coke oven gas, refinery gas etc.) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Flue gas obtained on complete combustion of pure acetylene (a hydrocarbon fuel) will contain (A) CO (B) CO2 (C) H2O (D) Both (B) & (C)

Description : Flue gas obtained on complete combustion of pure acetylene (a hydrocarbon fuel) will contain (A) CO (B) CO2 (C) H2O (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)