Description : Which method is used to detect double errors and pinpoint erroneous bits. a. Even parity method b. Odd parity method c. Check sum method. d. All of these
Last Answer : c. Check sum method.
Description : A simpleparity-check code can detect__________ errors. A) an even-number of B) two C) no errors D) an odd-number of
Last Answer : an odd-number of
Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above
Last Answer : b. CRC
Description : While transmitting odd-parity coded symbols, the number of zeros in each symbol is a. odd b. even c. a and b both d. unknown
Last Answer : unknown
Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above
Last Answer : Both of the above
Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum
Last Answer : Simple parity check
Description : Which error detection method usesone's complement arithmetic? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum
Last Answer : Checksum
Description : Which error detection method uses one's complement arithmetic? A. Simple parity check B. Two-dimensional parity check C. CRC D. Checksum
Last Answer : D. Checksum
Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes
Last Answer : b. 12,000 bytes
Last Answer : A parity check usually can detect One-bit error.
Description : Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101
Last Answer : (A) 11100010101
Description : The pattern of groups that have odd parity calledthe ses must match one of the of columns in the parity check matrix: a. Syndrome b. Dynodes c. Both d. None of these
Last Answer : a. Syndrome
Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ a. piggybacking b. cyclic redundancy check c. fletcher’s checksum d. parity check
Last Answer : a. piggybacking
Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check
Last Answer : A. piggybacking
Description : What is used to identify whether a data word has an odd or even number of 1’s ? (1) Carry bit (2) Sign bit (3) Zero bit (4) Parity bit
Last Answer : Parity bit
Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms
Last Answer : c. 1+x is a factor of G(x)
Description : Which of the following is associated with error detector? A) Odd parity bit B) Even parity bit C) Both of the above D) None of above
Last Answer : Answer : C
Last Answer : c. Both of the above
Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit
Last Answer : Binary codes
Description : Which of the following statements best describes the auditor's responsibility regarding the detection of material errors and frauds? a. The auditor is responsible for the failure to detect material ... unrecorded transactions even if there is no evidence that material errors and frauds may exist
Last Answer : The audit should be designed to provide reasonable assurance that material errors and frauds are detected
Description : Which of the following statements best describes the auditor's responsibility to detect material errors and fraud? a. The auditor is responsible for the failure to detect material errors and ... detect unrecorded transactions even if there is no evidence that material errors and frauds may exis
Last Answer : The audit should be designed to provide reasonable assurance that material errors and fraud are detected.
Description : Which of the following statements reflects an auditor's responsibility for detecting misstatements due to errors and fraud? a. An auditor is responsible for detecting employee errors and simple fraud, ... due to errors and fraud unless the application of GAAS would result in such detection.
Last Answer : An auditor should design the audit to provide reasonable assurance of detecting misstatements due to errors and fraud that are material to the financial statements.
Description : Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these
Last Answer : b. Parity check matrix
Description : Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a ... ratioof the number ofdata units in error to the total number of dataunits E. None of the above
Last Answer : the ratioof the number ofdata units in error to the total number of dataunits
Description : To guarantee correction ofup to 5 errors in all cases, the minimum Hamming distance in a block code must be________. A) 5 B) 6 C) 11 D) none of the above
Last Answer : 11
Description : To guarantee correction of upto t errors, the minimum Hamming distance d min in a block code must be ________. a. t+1 b. t−2 c. 2t−1 d. 2t+1
Last Answer : d. 2t+1
Description : To guarantee the detection of up to 5 errors in all cases, the minimum Hamming distance in a block code must be _______ A. 5 B. 6 C. 11 D. none of the above
Last Answer : B. 6
Description : CRC stands for __________ a. cyclic redundancy check b. code repeat check c. code redundancy check d. cyclic repeat check
Last Answer : a. cyclic redundancy check
Description : CRC stands for __________ A. cyclic redundancy check B. code repeat check C. code redundancy check D. cyclic repeat check
Last Answer : A. cyclic redundancy check
Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200
Last Answer : b. 800
Description : When planning the audit, if the auditor has no reason to believe that illegal acts exist, the auditor should a. Include audit procedures which have a strong probability of detecting illegal ... c. Still include some audit procedures designed specifically to uncover illegalities. d. Ignore the topic
Last Answer : Make inquiries of management regarding their policies and regarding their knowledge of violations, and then rely on normal audit procedures to detect errors, irregularities, and illegalities
Description : When planning the audit, if the auditor has no reason to believe that illegal acts exist, the auditor should a. Make inquiries of management regarding their policies and their knowledge of ... Ignore the topic. d. Include audit procedures which have a strong probability of detecting illegal acts
Last Answer : Make inquiries of management regarding their policies and their knowledge of violations, and then rely on normal audit procedures to detect errors, irregularities, and illegalities
Description : Write a shell script to accept a number from user check whether number is even or odd.
Last Answer : 2 8
Description : Parity bit check is used to
Last Answer : Parity bit check is used to Detect 1 bit error
Description : Bank Reconciliation Statement is prepared to detect the errors that take place in accounting.
Last Answer : State whether the following statement are True or False with reason : Bank Reconciliation Statement ... the errors that take place in accounting.
Description : The auditor's defense of contributory negligence is most likely to prevail when a. Third party injury has been minimal. b. The client is privately held as contrasted with a public company ... statements. d. The auditor fails to detect fraud resulting from management override of the control structure
Last Answer : The auditor fails to detect fraud resulting from management override of the control structure
Description : The auditor's defense of contributory negligence is most likely to prevail when a. Third party injury has been minimal. b. The client is privately held as contrasted with a public company. ... . d. The auditor fails to detect fraud resulting from management override of the control structure.
Last Answer : The auditor fails to detect fraud resulting from management override of the control structure.
Description : Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. ... care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence
Last Answer : Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence
Description : Which of the following conditions suggests auditor negligence? a. Failure to detect collusive fraud perpetrated by members of middle management. b. Failure to detect collusive fraud perpetrated by ... control structure. d. Failure to detect material errors under conditions of weak internal control
Last Answer : Failure to detect material errors under conditions of weak internal control
Description : After studying and evaluating a client's existing internal control, an auditor has concluded that the policies and procedures are well-designed and functioning as intended. Under these circumstances, the ... risk at a lower level than would be set under conditions of weak internal control.
Last Answer : Set detection risk at a higher level than would be set under conditions of weak internal control.
Description : Which of the following best describes the primary purpose of audit procedures? a. To detect errors or fraud b. To comply with generally accounting principles c. To gather sufficient, appropriate evidence d. To verify the accuracy of account balances
Last Answer : To gather sufficient, appropriate evidence
Description : __is divided into a number of fields and is represented as a sequence of bits: a. instruction b. — instruction set c. instruction code d. parity code
Last Answer : a. instruction
Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above
Last Answer : only when no error occurs at the transmission level
Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above
Last Answer : Frame check sequence
Description : When the set of input data to an even parity generator is 0111, the output will be (A) 1 (B) 0 (C) Unpredictable (D) Depends on the previous input
Last Answer : Ans: B In even parity generator if number of 1 is odd then output will be zero.
Description : Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors ... tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above
Last Answer : The probability that one or moreerrors will be undetected whenan error detection scheme is used
Description : Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons
Last Answer : 200 photons
Description : Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit
Last Answer : Answer : B
Last Answer : b. Binary codes