Description : One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec
Last Answer : (B) gm/cm. sec
Description : The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke
Last Answer : Answer: Option B
Description : SI unit for the surface tension is ____. (1) kg/m2 (2) kg/m3 (3) N/m (4) kg/m
Last Answer : (3) N/m Explanation: Surface tension is measured in force per unit length. Its SI unit is Newton per meter.
Description : The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2
Last Answer : (c) N-m
Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke
Last Answer : (A) The S.I. unit of dynamic viscosity
Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second
Last Answer : (A) 1 cm2 /second
Description : The units of dynamic or absolute viscosity are (A) Metres² per sec (B) kg sec/meter (C) Newton-sec per meter (D) Newton-sec² per meter
Last Answer : Answer: Option C
Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m
Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ
Last Answer : (A) 3.6 AVS.ρ
Description : The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K
Last Answer : (C) W/°K
Description : The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C
Last Answer : (b) C2/N.m2
Description : SI unit of resistivity is a. ohm b. Ohm×m c. Ohm×m-1 d. Ohm×m2
Last Answer : c. Ohm×m-1
Description : The unit of viscosity is (A) Metres² per sec (B) kg-sec/metre (C) Newton-sec per metre² (D) Newton-sec per meter
Description : For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m
Last Answer : (B) ∞ N/m2
Description : The value of Stefan-Boltzmann constant in SI unit is (A) 5.6697 × 10 -8W/m2 .°K4 (B) 0.1714 × 10 -8W/m2 .°K4 (C) 5.6697 × 10 -8kcal/m2 . °K4 (D) 0.1714 × 10 -8kcal/m2 . °K4
Last Answer : (A) 5.6697 × 10 -8W/m2 .°K4
Description : In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K
Last Answer : (A) Watt/m.°K
Description : Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes
Last Answer : (C) 1 stoke = 1 m2/sec
Description : Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation
Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material
Description : Stoke is the unit of (A) Kinematic viscosity in C. G. S. units (B) Kinematic viscosity in M. K. S. units (C) Dynamic viscosity in M. K. S. units (D) Dynamic viscosity in S. I. units
Last Answer : Answer: Option A
Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k ) a. 543680 N/m2 b. 543.68 kPa (gauge) c. Both a & b d. None of the above
Last Answer : Both a & b
Description : What is the unit of relative density? (1) kg/m (2) kg/m2 (3) kg/m3 (4) It has no unit
Last Answer : It has no unit
Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ
Last Answer : (A) 3.6 V.W.Dr.ρ
Description : The SI unit of mass a. kg b. g c. N d. None of the above
Last Answer : kg
Description : The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3
Last Answer : (C) N/m2
Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg
Last Answer : c. 10900 kg
Description : The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre
Description : If cosec |-sin |=l and sec |- cos |=m, prove that l2m2(l2+m2+3)=1 -Maths 9th
Last Answer : cosec(A) - sin(A) = l ⇒ 1/sin(A) - sin(A) = l ⇒ l² = 1/sin²(A) + sin²(A) - 2 --------- sec(A) - cos(A) = m ⇒ 1/cos(A) - cos(A) = m ⇒ m² = 1/cos²(A) + cos²(A) - 2 ---------- l²m² = [1/sin²(A) + ... A)) = = 1/(sin²(A)cos²(A)) ------------- ⇒ l²m² (l² + m² + 3) = sin²(A)cos²(A) / [sin²(A)cos²(A)] = 1
Description : Specific capacity or yield of wells, is generally expressed, as (A) m 3 per sec (B) m 3 /hour (C) m 3 /hour/m2 (D) m 3 /hour/m2 /m
Last Answer : (D) m 3 /hour/m2 /m
Description : Determine natural frequency of a system, which has equivalent spring stiffness of 43200 N/m and mass of 12 kg. A 40.22 rad/sec B 40 Hz C 60 Hz D 60 rad/sec
Last Answer : D 60 rad/sec
Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above
Last Answer : C. 42 x 10 3 N-s/m
Description : In a 2-mass 3 spring vibrating system the two masses each are of 9.8 kg coupling spring is having a stiffness of 3430 N/m whereas the other two springs have each a stiffness of 8820 N/m. The two natural frequencies in rad /sec are A) 10 & 20 B) 20 & 30 C) 30 & 40D) 40 & 50
Last Answer : C) 30 & 40
Description : In spring mass experiment, the natural frequency of 10 kg mass was found to be 12 rad/sec. the stiffness of the spring is A. 800 N/m B. 1200 N/m C. 1440 N/m D. 2000 N/m
Last Answer : C. 1440 N/m
Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above
Last Answer : c. 42 x 10 3 N-s/m
Description : The SI unit of Planck’s constant is a) Joule – Sec-1 b) Joule – Sec-2 c) Joule – Sec d) Joule – Sec2
Last Answer : c) Joule – Sec
Description : Unit of viscosity in CGS system is (A) gm .cm-1 sec-1 (B) gm . cm2 . sec-2 (C) gm .cm-2, sec-1 (D) gm . cm . sec-1
Last Answer : Option A
Description : The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m
Description : Unit of mass velocity is (A) kg/hr (B) kg/m2 . hr (C) kg/m2 (D) kg/m3 . hr
Last Answer : (B) kg/m2 . hr
Description : A sliding contact bearing is operating under stable condition. The pressure developed in oil film is p when the journal rotates at N rpm. The dynamic viscosity of lubricant is μ and effective coefficient of ... to p and f) (d) f is directly proportional to μ and inversely proportional to N
Last Answer : (b) f is directly proportional to μ and N
Description : A ship whose hull length is 100 m is to travel at 10 m/sec. For dynamic similarity, at what velocity should a 1:25 model be towed through water? (A) 10 m/sec (B) 25 m/sec (C) 2 m/sec (D) 50 m/sec
Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be (a) 4.17m3/kgmol (b) 400 m3/kg mol (c) 0.15 m3/kg mol (d) 41.7 m3/kg mol (e) 417m3/kgmol.
Last Answer : Answer : a
Description : The unit of the viscous damping coefficient is A N-m/sec B m/N-sec C N-sec-m D N-sec/m
Last Answer : D N-sec/m
Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec
Last Answer : (A) kW. sec/kg
Description : The units of moment of inertia are a.kgm4 b.kg-m2 c.kg/m2 d.kg/m e.m4
Last Answer : c. kg/m2
Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235
Last Answer : d. 10470
Description : The live load to be considered for an inaccessible roof, is (A) Nil (B) 75 kg/m2 (C) 150 kg/cm2 (D) 200 kg/m
Description : Specific heat capacity in SI unit. a. kJ / kg.k b. kJ / kg c. kN / kg d. None of the above
Last Answer : kJ / kg.k
Description : What is the SI unit of specific heat capacity? A. J/kg B. J/kg °F ∙ C. J/kg °C ∙ D. J/°C
Last Answer : J/kg °C
Description : What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C
Last Answer : (B) Kcal/hr.m.°C
Description : 5. Unit of surface tension in S.I. unit is (A) Watt/m (B) Joule/m2 (C) Newton/m2 (D) Joule/m
Last Answer : Option B