Unit of mass velocity is (A) kg/hr (B) kg/m2 . hr (C) kg/m2 (D) kg/m3 . hr

Unit of mass velocity is
(A) kg/hr
(B) kg/m2
. hr
(C) kg/m2
(D) kg/m3
. hr
by

1 Answer

Answer :

(B) kg/m2
. hr
by

Related questions

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

SI unit for the surface tension is ____. (1) kg/m2 (2) kg/m3 (3) N/m (4) kg/m

Description : SI unit for the surface tension is ____. (1) kg/m2 (2) kg/m3 (3) N/m (4) kg/m

Last Answer : (3) N/m Explanation: Surface tension is measured in force per unit length. Its SI unit is Newton per meter.

What is the unit of relative density? (1) kg/m (2) kg/m2 (3) kg/m3 (4) It has no unit

Description : What is the unit of relative density? (1) kg/m (2) kg/m2 (3) kg/m3 (4) It has no unit

Last Answer : It has no unit

For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Description : For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Last Answer : (B) ∞ N/m2

The live load to be considered for an accessible roof, is (A) Nil (B) 75 kg/m3 (C) 150 kg/m2 (D) 200 kg/cm

Description : The live load to be considered for an accessible roof, is (A) Nil (B) 75 kg/m3 (C) 150 kg/m2 (D) 200 kg/cm

Last Answer : Answer: Option C

A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k )  a. 543680 N/m2  b. 543.68 kPa (gauge)  c. Both a & b  d. None of the above

Last Answer : Both a & b

Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Last Answer : Answer : a

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Description : The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Last Answer : (A) 500

The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Description : The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Last Answer : (C) N/m2

Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Description : The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Last Answer : Answer: Option A

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Description : What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Last Answer : (B) Kcal/hr.m.°C

Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Description : Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Last Answer : (A) Ton stock/hr/m2 hearth area

A gas (density = 1.5 kg/m3 , viscosity = 2 × 10 ‒5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The pressure drop for another gas, with density of 1.5 kg/m3and viscosity of 3 × 10 ‒5kg/m.s flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Description : A gas (density = 1.5 kg/m3 , viscosity = 2 10 -5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The ... flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Last Answer : (B) 12600 Pa/m

. One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Last Answer : (A) 1 cm2 /second

The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Description : The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Last Answer : (A) kg/m. sec

Oxytremorine is a selective agonist of muscarinic _______ receptors (a) M1 (b) M2 (c) M3 (d) M4

Description : Oxytremorine is a selective agonist of muscarinic _______ receptors (a) M1 (b) M2 (c) M3 (d) M4

Last Answer : Ans: A

Which of the following is the most liquid money? A. M1 B. M2 C. Securities D. M3 E. Call Money

Description : Which of the following is the most liquid money? A. M1 B. M2 C. Securities D. M3 E. Call Money

Last Answer : A. M1 Explanation: The most liquid portions of the money supply are measured by M1 because it contains currency and assets that can be converted to cash quickly. ―Near money‖ and ―near, near money,‖ which fall under M2 and M3, cannot be converted to currency as quickly.

Consider different activities related to email: m1: Send an email from a mail client to a mail server m2: Download an email from mailbox server to a mail client m3: Checking email in a web browser Which is the application level protocol used in each activity? a. m1: HTTP m2: SMTP m3: POP b. m1: SMTP m2: FTP m3: HTTP c. m1: SMTP m2: POP m3: HTTP d. m1: POP m2: SMTP m3: IMAP

Description : Consider different activities related to email: m1: Send an email from a mail client to a mail server m2: Download an email from mailbox server to a mail client m3: Checking email in a web browser Which is the application ... FTP m3: HTTP c. m1: SMTP m2: POP m3: HTTP d. m1: POP m2: SMTP m3: IMAP

Last Answer : c. m1: SMTP m2: POP m3: HTTP

A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Description : If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Last Answer : (C) 10 metres

For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Description : The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Last Answer : Answer: Option C

The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Description : The expected out turn of half brick partition wall per mason per day is (A) 1.5 m3 (B) 2.0 m3 (C) 4.0 m2 (D) 5.0 m2

Last Answer : (B) 2.0 m3

In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Last Answer : Answer : c

Rate of heat release in a furnace, which is the measure of heat intensity, is defined as (A) kcal/hr/m3 combustion space (B) kcal/m3 combustion space (C) kcal/hr (D) None of these

Description : Rate of heat release in a furnace, which is the measure of heat intensity, is defined as (A) kcal/hr/m3 combustion space (B) kcal/m3 combustion space (C) kcal/hr (D) None of these

Last Answer : (A) kcal/hr/m3 combustion space

The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Description : The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Last Answer : Answer: Option D

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Last Answer : (C) 50 -100 BTU/hr. ft. 2°F

Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of a perfectly black body is unity (D) Value of Stefan-Boltzmann constant is 4.876 × 10 -8 KCal/m2 .hr.°K4

Description : Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of ... unity (D) Value of Stefan-Boltzmann constant is 4.876 10 -8 KCal/m2 .hr.°K4

Last Answer : (A) With change in temperature, the radiant energy emitted by a black body remains unchanged

A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Description : A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Last Answer : (B) 4.88 kcal/hr. m. 2°C

Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Last Answer : (B) 3 to 6

Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500(D) 4000 to 5000

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

A 19 year-old female is referred following a visit to the dentist where marked erosion of her teeth was noted. She was entirely asymptomatic and her only medication was the oral contraceptive pill. On examination her blood pressure was 110/70 mmHg and her body mass index was 21.5 kg/m2 (18 - 25). Investigations sodium 135 mmol/l potassium 2.1 mmol/l bicarbonate 42 mmol/l urea 2.6 mol/L corrected calcium 2.08 mmol/ alkaline phosphatase 201 iu/l (50-110) What is the most likely diagnosis? 1) Bulimia nervosa 2) Conn's syndrome 3) Laxative abuse 4) Pregnancy 5) Primary hypoparathyroidism

Description : A 19 year-old female is referred following a visit to the dentist where marked erosion of her teeth was noted. She was entirely asymptomatic and her only medication was the oral contraceptive pill ... ) Bulimia nervosa 2) Conn's syndrome 3) Laxative abuse 4) Pregnancy 5) Primary hypoparathyroidism

Last Answer : Answers-5 This patient has tooth erosion associated with hypokalaemic metabolic alkalosis and hypocalcaemia. This suggests a diagnosis of hypoparathyroidism. Conn's is unlikely in this age group, is ... raised alkaline phosphatase would not be expected. Early pregnancy would not fit this picture.

Body Mass Index= A. Height in centimeters Weight (kg) B. Weight (kg) Height (M2) C. Height (M2) Weight (kg) D. Weight (kg) Height in centimeters

Description : Body Mass Index= A. Height in centimeters Weight (kg) B. Weight (kg) Height (M2) C. Height (M2) Weight (kg) D. Weight (kg) Height in centimeters

Last Answer : Ans: B

A cantilever shaft has a diameter of 6 cm and the length is 40cm, it has a disc of mass 125 kg at its free end. The Young’s modulus for the shaft material is 250 GN/m2. Calculate the static deflection in nm. a) 0.001 b) 0.083c) 1.022 d) 0.065

Description : A cantilever shaft has a diameter of 6 cm and the length is 40cm, it has a disc of mass 125 kg at its free end. The Young’s modulus for the shaft material is 250 GN/m2. Calculate the static deflection in nm. a) 0.001 b) 0.083c) 1.022 d) 0.065

Last Answer : a) 0.001

The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Description : The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Last Answer : (c) N-m

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

Normal values of overflow rate for plain sedimentation tank using coagulants, is (A) 750 to 1000 litres/hr/m2(B) 1000 to 1250 litres/hr/m2(C) 1250 to 1500 litres/hr/m2(D) 1500 litres/hr/m

Description : Normal values of overflow rate for plain sedimentation tank using coagulants, is (A) 750 to 1000 litres/hr/m2 (B) 1000 to 1250 litres/hr/m2 (C) 1250 to 1500 litres/hr/m2 (D) 1500 litres/hr/m

Last Answer : (B) 1000 to 1250 litres/hr/m2

Normal values of overflow rate for sedimentation tanks using coagulants in litres/hr/m2 , generally range between (A) 250 to 500 (B) 500 to 750 (C) 750 to 1000 (D) 1000 to 1250

Description : Normal values of overflow rate for sedimentation tanks using coagulants in litres/hr/m2 , generally range between (A) 250 to 500 (B) 500 to 750 (C) 750 to 1000 (D) 1000 to 1250

Last Answer : (D) 1000 to 1250

Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range between (A) 100 to 250 (B) 250 to 500 (C) 500 to 750 (D) 750 to 1000

Description : Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range  between  (A) 100 to 250  (B) 250 to 500  (C) 500 to 750  (D) 750 to 1000 

Last Answer : (C) 500 to 750 

Normal values of overflow rate for plain sedimentation tank, is (A) 250 to 500 litres/hr/m2 (B) 500 to 750 litres/hr/m2 (C) 750 to 1000 litres/hr/m2 (D) 1000 to 1250 litres/hr/m

Description : Normal values of overflow rate for plain sedimentation tank, is  (A) 250 to 500 litres/hr/m2 (B) 500 to 750 litres/hr/m2 (C) 750 to 1000 litres/hr/m2 (D) 1000 to 1250 litres/hr/m

Last Answer : (B) 500 to 750 litres/hr/m

The combined mass of car and passengers travelling at 72 km/hr is 1500 kg. Find the kinetic energy of this combined mass. (Formula: K =mv2 / 2k )  a. 300 kJ  b. 200 kJ  c. 500 kJ  d. None of the above

Description : The combined mass of car and passengers travelling at 72 km/hr is 1500 kg. Find the kinetic energy of this combined mass. (Formula: K =mv2 / 2k )  a. 300 kJ  b. 200 kJ  c. 500 kJ  d. None of the above

Last Answer : 300 kJ