Which consequences are more likely to occur during the frame transmission in StopandWait ARQ mechanism? a. Loss of frame or an acknowledgementb. Delay in an acknowledgement c. Normal operation d. All of the above

Which consequences are more likely to
occur during the frame transmission in
StopandWait ARQ mechanism?
a. Loss of frame or an acknowledgement
b. Delay in an acknowledgement
c. Normal operation
d. All of the above
by

1 Answer

Answer :

d. All of the above
by

Related questions

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Description : Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Last Answer : b. Selective Repeat ARQ

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Description : The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Last Answer : Go-Back-N ARQ; Stop-and-Wait

Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Description : Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Last Answer : b. Sender Sliding Window

Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Description : Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Last Answer : B. Sender Sliding Window

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception of acknowledgement? a. Provision of sequence number in the header of message b. Provision of checksum computation c. Both a & b d. None of the above

Description : Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception ... message b. Provision of checksum computation c. Both a & b d. None of the above

Last Answer : Provision of sequence number in the header of message

Which of the following problems will most likely occur if the starting winding of a split-phase induction motor failed to cutout once the motor was in continuous operation? A. The motor will overspeed. B. The motor will run at a reduced speed. C. A time delay will stop the motor. D. The winding will burn out.

Description : Which of the following problems will most likely occur if the starting winding of a split-phase induction motor failed to cutout once the motor was in continuous operation? A. The motor will overspeed. B. The ... reduced speed. C. A time delay will stop the motor. D. The winding will burn out.

Last Answer : Answer: D

______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Last Answer : ATM

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Last Answer : c. 20 metres of cable.

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Last Answer : exactly 10

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Last Answer : B. High-level data link control

ARQ stands for _______. A) Automatic repeatquantization B) Automatic repeat request C) Automatic retransmissionrequest D) Acknowledge repeat request

Description : ARQ stands for _______. A) Automatic repeatquantization B) Automatic repeat request C) Automatic retransmissionrequest D) Acknowledge repeat request

Last Answer : Automatic repeat request

In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Description : In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Last Answer : 7

In a Go-Back-N ARQ, if the window size is 63,what is the range of sequence numbers? A) 0to 63 B) 0to 64 C) 1to 63 D) 1to 64

Description : In a Go-Back-N ARQ, if the window size is 63,what is the range of sequence numbers? A) 0to 63 B) 0to 64 C) 1to 63 D) 1to 64

Last Answer : 0to 63

In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Description : In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Last Answer : modulo-2

In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 16

In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Description : In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 16

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 1

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 31

Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Selective-Repeat ARQ

Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Go-Back-N ARQ

Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait B) Simplest

ARQ stands for __________ a. Automatic Repeat Request b. Automatic Request Repeat c. Application Repeat Request d. Application Request Repeat

Description : ARQ stands for __________ a. Automatic Repeat Request b. Automatic Request Repeat c. Application Repeat Request d. Application Request Repeat

Last Answer : a. Automatic Repeat Request

Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Description : Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Last Answer : c. Reject

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence numbers? A. 0 to 63 B. 0 to 64 C. 1 to 63 D. 1 to 64

Description : In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence numbers? A. 0 to 63 B. 0 to 64 C. 1 to 63 D. 1 to 64

Last Answer : A. 0 to 63

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

When data and acknowledgement are sent in the same frame, this is called as (A) Piggy packing (B) Piggy backing (C) Back packing (D) Good packing

Description : When data and acknowledgement are sent in the same frame, this is called as (A) Piggy packing (B) Piggy backing (C) Back packing (D) Good packing

Last Answer : (B) Piggy backing

Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors will be undetected whenan error detection scheme is used C. the probability thatone or more errors will bedetected when anerror detection mechanism is used D. signal tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Description : Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors ... tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Last Answer : The probability that one or moreerrors will be undetected whenan error detection scheme is used

The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Description : The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Last Answer : IP

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Description : What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Last Answer : b. 25%

ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Description : ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Last Answer : (B) Error in received data

Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks

Description : Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks

Last Answer : a) collision detection

Time during which a job is processed by the computer is a. Delay times b. Real time c. Execution time d. Down time

Description : Time during which a job is processed by the computer is a. Delay times b. Real time c. Execution time d. Down time

Last Answer : Execution time

Time during which a job is processed by the computer is a. Delay times b. Real time c. Execution time d. Down time

Description : Time during which a job is processed by the computer is a. Delay times b. Real time c. Execution time d. Down time

Last Answer : Execution time

Mark the correct option. The Indian Post Office is exempted by law from all responsibility in the case of: (A) Loss, misdelivery or delay of registered article in course of transmission by post (B) Wrong payment of inland money order (C) Wrong delivery of insured letter (D) Wrong delivery of insured parcel

Description : Mark the correct option. The Indian Post Office is exempted by law from all responsibility in the case of: (A) Loss, misdelivery or delay of registered article in course of transmission by post ( ... of inland money order (C) Wrong delivery of insured letter (D) Wrong delivery of insured parcel

Last Answer : (A) Loss, misdelivery or delay of registered article in course of transmission by post

legal responsibility of post office is exempted from a) Any fault by induvidual b) Loss, mis delivery or delay of , or damage to, any postal article in course of transmission by post c) wrong payment or delay in payment by foreign postal administration of money order issued in India. d) All the above

Description : legal responsibility of post office is exempted from a) Any fault by induvidual b) Loss, mis delivery or delay of , or damage to, any postal article in course of transmission by post c) wrong ... or delay in payment by foreign postal administration of money order issued in India. d) All the above

Last Answer : d) All the above