An ideal nozzle design aims at (A) Minimising wall friction (B) Suppressing boundary layer separation (C) Both (A) & (B) (D) Neither (A) nor (B)

An ideal nozzle design aims at
(A) Minimising wall friction
(B) Suppressing boundary layer separation
(C) Both (A) & (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) & (B)
by

Related questions

The effect of friction on the flow of steam through a nozzle is to decrease the __________ of steam. (A) Wetness (B) Mass flow rate (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : The effect of friction on the flow of steam through a nozzle is to decrease the __________ of steam. (A) Wetness (B) Mass flow rate (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Description : Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Last Answer : Option C

The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra

To ensure that supporting area of an offset footing of a boundary wall is fully compressive, the C.G. of load must act (A) At the centre of the base (B) Within the middle third of the base (C) Within the middle fifth of the base (D) Neither (a), (b) nor (c)

Description : To ensure that supporting area of an offset footing of a boundary wall is fully compressive, the C.G. of load must act (A) At the centre of the base (B) Within the middle third of the base (C) Within the middle fifth of the base (D) Neither (a), (b) nor (c)

Last Answer : Answer: Option B

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Interruption of large currents by relay requires (a) arc suppressing blow out coils (b) wide separation of the opened contacts (c) high speed opening of contacts (d) all of the above

Description : Interruption of large currents by relay requires (a) arc suppressing blow out coils (b) wide separation of the opened contacts (c) high speed opening of contacts (d) all of the above

Last Answer : (d) all of the above

Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

If two pure liquid constituents are mixed in any proportion to give an ideal solution, there is no change in (A) Volume (B) Enthalpy (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If two pure liquid constituents are mixed in any proportion to give an ideal solution, there is no change in (A) Volume (B) Enthalpy (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Description : Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Last Answer : (B) Cross-section of the channel is reduced

Boundary layer separation is characterised by one of the conditions given below, where 'Re' is the Reynolds number for the flow. Select the appropriate conditions. (A) Re << 1, accelerating flow (B) Re >> 1, accelerating flow (C) Re << 1, decelerating flow (D) Re >>1, decelerating flow

Description : Boundary layer separation is characterised by one of the conditions given below, where 'Re' is the Reynolds number for the flow. Select the appropriate conditions. (A) Re > 1, accelerating flow (C) Re >1, decelerating flow

Last Answer : (D) Re >>1, decelerating flow

In fluid flow, the boundary layer separation cannot occur (A) In case of boundaries experiencing form drag (B) At points of abrupt changes in the flow directions (C) In laminar flow (D) None of these

Description : In fluid flow, the boundary layer separation cannot occur (A) In case of boundaries experiencing form drag (B) At points of abrupt changes in the flow directions (C) In laminar flow (D) None of theseIn ... B) At points of abrupt changes in the flow directions (C) In laminar flow (D) None of these

Last Answer : (D) None of these

Boundary layer separation is caused by the (A) Reduction of pressure to vapour pressure (B) Boundary layer thickness reducing to zero (C) Adverse pressure gradient (D) Reduction of pressure gradient to zero

Description : Boundary layer separation is caused by the (A) Reduction of pressure to vapour pressure (B) Boundary layer thickness reducing to zero (C) Adverse pressure gradient (D) Reduction of pressure gradient to zero

Last Answer : (D) Reduction of pressure gradient to zero

Boundary layer separation is caused by the (A) Reduction of pressure below vapour pressure (B) Reduction of pressure gradient to zero (C) Adverse pressure gradient (D) Reduction of boundary layer thickness to zero

Description : Boundary layer separation is caused by the (A) Reduction of pressure below vapour pressure (B) Reduction of pressure gradient to zero (C) Adverse pressure gradient (D) Reduction of boundary layer thickness to zero

Last Answer : (C) Adverse pressure gradient

The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Description : The major reason of hydrodynamic noise (i.e., noise resulting from liquid flow) is (A) Pipe vibrations (B) Cavitation (C) Boundary layer separation (D) Fluctuation in liquid flow

Last Answer : (B) Cavitation

At the point of boundary layer separation in fluid flow, the (A) Shear stress is maximum (B) Velocity gradient is flat (C) Density variation is maximum (D) Shear stress is zero

Description : At the point of boundary layer separation in fluid flow, the (A) Shear stress is maximum (B) Velocity gradient is flat (C) Density variation is maximum (D) Shear stress is zero

Last Answer : Option A

The main function of a muffle in the muffle furnace is to (A) Protect the charge from the effects of the products of combustion (B) Smooth out temperature inequalities on the combustion side of the muffle wall (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The main function of a muffle in the muffle furnace is to (A) Protect the charge from the effects of the products of combustion (B) Smooth out temperature inequalities on the combustion side of the muffle wall (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

An isolated system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy and mass cross the boundaries of the system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Description : An isolated system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both ... system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Last Answer : Answer : b

An open system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy and mass cross the boundaries of the system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Description : An open system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy ... system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Last Answer : Answer : c

A closed system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) mass crosses the boundary but not the energy (c) neither mass nor energy crosses the boundaries of the system  (d) both energy and mass cross the boundaries of the system  (e) thermodynamic reactions take place.

Description : A closed system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) mass crosses the boundary but not the energy (c) neither mass nor energy ...  (d) both energy and mass cross the boundaries of the system  (e) thermodynamic reactions take place.

Last Answer : Answer : a

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

02. The separation of flow occurs when the hydrodynamic boundary layer thickness is reduced to zero. A) AgreeB) Disagree

Description : 02. The separation of flow occurs when the hydrodynamic boundary layer thickness is reduced to zero. A) Agree B) Disagree

Last Answer : A

The region between the separation streamline and the boundary surface of the solid body is known as (A) Wake (B) Drag (C) Lift (D) Boundary layer

Description : The region between the separation streamline and the boundary surface of the solid body is known as (A) Wake (B) Drag (C) Lift (D) Boundary layer

Last Answer : Answer: Option A

Digital marketing aims to  Identify customer needs  Targeting niche audience  Both A & B  Neither of A & B

Description : Digital marketing aims to  Identify customer needs  Targeting niche audience  Both A & B  Neither of A & B

Last Answer :  Both A & B

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Description : Boundary layer exists in flow (A) Of real fluids (B) Over flat surfaces only (C) In pipes only (D) Of ideal fluids only

Last Answer : (A) Of real fluids

Which of the following must be followed by the flow of a fluid (real or ideal)? (I) Newton's law of viscosity. (II) Newton's second law of motion. (III) The continuity equation. (IV) Velocity of boundary layer must be zero relative to boundary. (V) Fluid cannot penetrate a boundary. (A) I, II, III (B) II, III, V (C) I, II, V (D) II, IV, V

Description : Which of the following must be followed by the flow of a fluid (real or ideal)? (I) Newton's law of viscosity. (II) Newton's second law of motion. (III) The continuity equation. (IV) Velocity of boundary layer must be zero relative to ... . (A) I, II, III (B) II, III, V (C) I, II, V (D) II, IV, V

Last Answer : (B) II, III, V

Which among the following is the condition to avoid separation of connected members? a. Force acting on the connected members should be negative b. Force acting on the connected members should be positive c. Force acting on the connected members should be neither positive nor negative d. None of the above

Description : Which among the following is the condition to avoid separation of connected members? a. Force acting on the connected members should be negative b. Force acting on the connected members should be ... acting on the connected members should be neither positive nor negative d. None of the above

Last Answer : a. Force acting on the connected members should be negative

The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is always equal to the energy input  c. energy can neither be created nor destroyed but only converted from one form to another  d. all of the above

Description : The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is ... neither be created nor destroyed but only converted from one form to another  d. all of the above

Last Answer : all of the above

An ideal flow of any fluid must satisfy (A) Pascal law (B) Newton's law of viscosity (C) Boundary layer theory (D) Continuity equation

Description : An ideal flow of any fluid must satisfy (A) Pascal law (B) Newton's law of viscosity (C) Boundary layer theory (D) Continuity equation

Last Answer : Answer: Option D

What is the effect of friction on flow of steam through a nozzle ?

Description : What is the effect of friction on flow of steam through a nozzle ?

Last Answer : To decrease both mass flow rate and wetness of steam.

The power transmitted through the nozzle is maximum when the head lost due to friction in the pipe is __________ of the total supply head. (A) One-half (B) One-third (C) Two-third (D) None of these

Description : The power transmitted through the nozzle is maximum when the head lost due to friction in the pipe is __________ of the total supply head. (A) One-half (B) One-third (C) Two-third (D) None of these

Last Answer : Answer: Option B

Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Description : Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Last Answer : Answer: Option B

Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Description : Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Last Answer : [ C ] both (a) and (b)

Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Description : Strain compatibility method is the method used for the analysis and design of [ A ] singly reinforced sections [ B ] doubly reinforced sections [ C ] both (a) and (b) [ D ] neither (a) nor (b)

Last Answer : [ C ] both (a) and (b)

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)