Capillary rise of mercury in a small diameter tube is proportional to (where, d = diameter of the tube, σ = surface tension of mercury) (A) d (B) 1/d (C) σ (D) 1/σ

Capillary rise of mercury in a small diameter tube is proportional to
(where, d = diameter of the tube, σ = surface tension of mercury)
(A) d
(B) 1/d
(C) σ
(D) 1/σ
by

1 Answer

Answer :

(C) σ
by

Related questions

The capillary rise of mercury is maximum in glass tube of dia __________ mm. (A) 0.5 (B) 1 (C) 2 (D) 5

Description : The capillary rise of mercury is maximum in glass tube of dia __________ mm. (A) 0.5 (B) 1 (C) 2 (D) 5

Last Answer : (A) 0.5

If two capillary tubes of dia 0.5 mm and 1 mm are dipped in a pot containing mercury, then the rise of mercury is (A) Same in both the tubes (B) Greater in 1 mm dia tube (C) Greater in 0.5 mm dia tube (D) Zero in both the tubes

Description : If two capillary tubes of dia 0.5 mm and 1 mm are dipped in a pot containing mercury, then the rise of mercury is (A) Same in both the tubes (B) Greater in 1 mm dia tube (C) Greater in 0.5 mm dia tube (D) Zero in both the tubes

Last Answer : (C) Greater in 0.5 mm dia tube

A capillary tube is kept vertical in a beaker containing liquid. The height to which the liquid rises by capillary action is increased if (a) The radius of the capillary is large (b) The radius of the capillary is small (c) The density of the liquid is large (d) The surface tension of the liquid is small

Description : A capillary tube is kept vertical in a beaker containing liquid. The height to which the liquid rises by capillary action is increased if (a) The radius of the capillary is large (b) The radius of the ... small (c) The density of the liquid is large (d) The surface tension of the liquid is small

Last Answer : Ans:(b)

A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic tube (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Description : A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic ... (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Last Answer : Answer: Option A

Water rises in a capillary tube to a height h. It will rise to a height more than h. a.in a lift moving up with an acceleration b.in all the above cases c.107 dynes d.at the poles e.on the surface of moon

Description : Water rises in a capillary tube to a height h. It will rise to a height more than h. a.in a lift moving up with an acceleration b.in all the above cases c.107 dynes d.at the poles e.on the surface of moon

Last Answer : e. on the surface of moon

Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B

The surface tension of mercury at normal temperature compared to that of water is (A) More (B) Less (C) Same (D) More or less depending on size of glass tube

Description : The surface tension of mercury at normal temperature compared to that of water is (A) More (B) Less (C) Same (D) More or less depending on size of glass tube

Last Answer : Answer: Option A

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Description : With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Last Answer : Answer: Option A

The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Description : The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Last Answer : Answer: Option D

__________ mean diameter of particles is given by Σ (xi /Dpi ⃗) (A) Mass (B) Volume (C) Arithmetic (D) Volume surface

Description : __________ mean diameter of particles is given by Σ (xi /Dpi ⃗) (A) Mass (B) Volume (C) Arithmetic (D) Volume surface

Last Answer : (B) Volume

Correction for capillary effect in manometers (used for pressure measurement) need not be applied, if diameter of the manometer tube is __________ mm. (A) < 4 (B) > 4 (C) > 12.5 (D) < 10

Description : Correction for capillary effect in manometers (used for pressure measurement) need not be applied, if diameter of the manometer tube is __________ mm. (A) < 4 (B) > 4 (C) > 12.5 (D) < 10

Last Answer : (C) > 12.5

Let a tin capillary tube be replaced with another tube of insufficient length then we find that water (a) Will overflow (b) Will not rise (c) Depress (d) Changes its meniscus

Description : Let a tin capillary tube be replaced with another tube of insufficient length then we find that water (a) Will overflow (b) Will not rise (c) Depress (d) Changes its meniscus

Last Answer : Ans:(b)

The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately (A) 5 mm (B) 10 mm (C) 20 mm (D) 30 mm

Description : The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately (A) 5 mm (B) 10 mm (C) 20 mm (D) 30 mm

Last Answer : Answer: Option D

If the diameter of a capillary is doubled, then the rise of water in it will be – (1) two times (2) half (3) four times (4) no change

Description : If the diameter of a capillary is doubled, then the rise of water in it will be – (1) two times (2) half (3) four times (4) no change

Last Answer : (2) half Explanation: Radius of a capillary tube is inversely proportional to the height of the liquid column. So, if radius of the tube is doubled, rise of level of water will becomes half ... to flow in narrow spaces without the assistance of, and in opposition to external forces like gravity.

If the diameter of a capillary is doubled, then the rise of water in it will be (1) two times (2) half (3) four times (4) no change

Description : If the diameter of a capillary is doubled, then the rise of water in it will be (1) two times (2) half (3) four times (4) no change

Last Answer : half

Property responsible for the talcum powder to cling to the skin is the (A) Capillary action (B) Adhesion (C) Cohesion (D) Surface tension

Description : Property responsible for the talcum powder to cling to the skin is the (A) Capillary action (B) Adhesion (C) Cohesion (D) Surface tension

Last Answer : Option B

The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Description : The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Last Answer : (D) Both viscosity and surface tension are increased

How do I calculate capillary entry pressure for a given pore width and and a known surface tension?

Description : How do I calculate capillary entry pressure for a given pore width and and a known surface tension?

Last Answer : I’m not a scientist but I did have a flash of intuition while reading your question. Must not these calculations have been made when the type of waterproof/breathable fabric that admits vapor but not water? The patents are certainly public.

The following observations were taken for determining surface tension T of water by capillary method: (A) 0.15%  (B) 1.5% 

Description : The following observations were taken for determining surface tension T of water by capillary method: (A) 0.15%  (B) 1.5% 

Last Answer : The following observations were taken for determining surface tension T of water by capillary method: diameter of capillary ... (C) 2.4% (D) 10%

The water, retained by the soil in capillary pores (micropores), against gravity (-1/3 to - 31 bar) by the force of surface tension

Description : The water, retained by the soil in capillary pores (micropores), against gravity (-1/3 to - 31 bar) by the force of surface tension

Last Answer : Ans.Capillary water

A solid needle placed horizontally on the surface of the water floats due to (a) Surface tension (b) Capillary action (c) Cohesion (d) Adhesion

Description : A solid needle placed horizontally on the surface of the water floats due to (a) Surface tension (b) Capillary action (c) Cohesion (d) Adhesion

Last Answer : Ans:(a)

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Description : A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : (3) surface tension of water Explanation: A solid needle placed horizontally on the surface of water floats due to surface tension of water.

Which of the following is a result of Surface tension? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Description : Which of the following is a result of Surface tension? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : (3) Capillary action Explanation: Capillary action is the result of adhesion and surface tension. Adhesion of water to the walls of a vessel will cause an upward force on the liquid at the edges ... intact, so instead of just the edges moving upward, the whole liquid surface is dragged upward.

Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Description : Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Last Answer : Answer: Option D

A solid needle placed horizontally on the surface of the water floats due to (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Description : A solid needle placed horizontally on the surface of the water floats due to (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : surface tension of water

Which of the following is a result of Surface tension ? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Description : Which of the following is a result of Surface tension ? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : Capillary action

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : Of the capillary action phenomenon

A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Description : A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Last Answer : (B) d -0.2

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

Spherical shape of mercury droplets is due to its (A) High viscosity (B) Low surface tension (C) High density (D) High surface tension

Description : Spherical shape of mercury droplets is due to its (A) High viscosity (B) Low surface tension (C) High density (D) High surface tension

Last Answer : Option D

According to Poiseuille's law, the permeability for gas flow through a capillary is proportional to (where, μ = gas viscosity) (A) μ (B) 1/μ (C) √μ (D) μ

Description : According to Poiseuille's law, the permeability for gas flow through a capillary is proportional to (where, μ = gas viscosity) (A) μ (B) 1/μ (C) √μ (D) μ

Last Answer : (B) 1/μ

Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Last Answer : (C) Stainless steel

Mercury is an ideal barometric fluid mainly due to its(A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Description : Mercury is an ideal barometric fluid mainly due to its (A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Last Answer : (D) Very low vapor pressure

Surface tension of a liquid (A) Is due to intermolecular forces of cohesion (B) Decreases with rise in temperature (C) Is responsible for the spherical shape of an isolated liquid drop (D) All (A), (B) & (C)

Description : Surface tension of a liquid (A) Is due to intermolecular forces of cohesion (B) Decreases with rise in temperature (C) Is responsible for the spherical shape of an isolated liquid drop (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Surface tension is inversely proportional to temperature and?

Description : Surface tension is inversely proportional to temperature and?

Last Answer : Pressure

The mercury does not wet the glass. This is due to the property of the liquid known as (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Description : The mercury does not wet the glass. This is due to the property of the liquid known as (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Last Answer : Answer: Option D

Mercury does not wet glass. This is due to property of liquid known as (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Description : Mercury does not wet glass. This is due to property of liquid known as (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Last Answer : Answer: Option C

The surface tension of mercury at normal temperature is __________ that of water. (A) Same as (B) Lower than (C) Higher than (D) None of these

Description : The surface tension of mercury at normal temperature is __________ that of water. (A) Same as (B) Lower than (C) Higher than (D) None of these

Last Answer : Answer: Option C

Pick out the wrong statement: (A) The vacuum pressure is always the negative gauge pressure (B) The pressure of the liquid measured by a piezometer tube is the gauge pressure (C) Manometric liquid should have high surface tension (D) The point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

Description : Pick out the wrong statement: (A) The vacuum pressure is always the negative gauge pressure (B) The pressure of the liquid measured by a piezometer tube is the gauge pressure (C) Manometric ... point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

Last Answer : (D) The point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

The specific surface of spherical particles is proportional to (where, Dp = diameter of particle). (A) D2 p (B) Dp (C) 1/Dp (D) 1/D2p

Description : The specific surface of spherical particles is proportional to (where, Dp = diameter of particle). (A) D2 p (B) Dp (C) 1/Dp (D) 1/D2p

Last Answer : (C) 1/Dp

Very small pressure difference (< 5 mm water column) can be most conveniently measured by a/an __________ manometer. (A) U-tube water (B) U-tube mercury (C) Inclined tube mercury (D) Inclined tube water

Description : Very small pressure difference (< 5 mm water column) can be most conveniently measured by a/an __________ manometer. (A) U-tube water (B) U-tube mercury (C) Inclined tube mercury (D) Inclined tube water

Last Answer : (D) Inclined tube water

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Description : The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Last Answer : c. Both (a) and (b)

With the rise of temperature, what will be the surface tension of a liquid? -Do You Know?

Description : With the rise of temperature, what will be the surface tension of a liquid? -Do You Know?

Last Answer : Viscosity and surface tension are the physical properties of the liquid. As the temperature increases, viscosity decreases. Surface tension decreases with increase in the temperature.

Rise of oil a wick is due to – (1) density of the oil (2) viscosity of the oil (3) surface tension of the oil (4) pressure of the oil

Description : Rise of oil a wick is due to – (1) density of the oil (2) viscosity of the oil (3) surface tension of the oil (4) pressure of the oil

Last Answer : (3) surface tension of the oil Explanation: The phenomenon of rise or fall of liquid in a capillary tube is called capillarity. Oil rises through a wick due to capillarity. The narrow ... tiny capillaries, through which oil rises. Capillary action is the result of adhesion and surface tension.