The following observations were taken for determining surface tension T of water by capillary method: (A) 0.15%  (B) 1.5% 

1 Answer

Answer :

The following observations were taken for determining surface tension T of water by capillary method: diameter of capillary ... (C) 2.4% (D) 10%

Related questions

Description : What is the most accurate method of obtaining project information that can reduce the amount  of risk? 1. Observations on the current project  2. Determining the risk by using brainstorming ... from previous projects that were similar in nature  4. Sensitivity analysis  5. Delphi technique.

Last Answer : 3. The use of historical data from previous projects that were similar in nature

Description : The water, retained by the soil in capillary pores (micropores), against gravity (-1/3 to - 31 bar) by the force of surface tension

Last Answer : Ans.Capillary water

Description : A solid needle placed horizontally on the surface of the water floats due to (a) Surface tension (b) Capillary action (c) Cohesion (d) Adhesion

Last Answer : Ans:(a)

Description : A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : (3) surface tension of water Explanation: A solid needle placed horizontally on the surface of water floats due to surface tension of water.

Description : A solid needle placed horizontally on the surface of the water floats due to (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : surface tension of water

Description : How do I calculate capillary entry pressure for a given pore width and and a known surface tension?

Last Answer : I’m not a scientist but I did have a flash of intuition while reading your question. Must not these calculations have been made when the type of waterproof/breathable fabric that admits vapor but not water? The patents are certainly public.

Description : A capillary tube is kept vertical in a beaker containing liquid. The height to which the liquid rises by capillary action is increased if (a) The radius of the capillary is large (b) The radius of the ... small (c) The density of the liquid is large (d) The surface tension of the liquid is small

Last Answer : Ans:(b)

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

Description : Which of the following is a result of Surface tension? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : (3) Capillary action Explanation: Capillary action is the result of adhesion and surface tension. Adhesion of water to the walls of a vessel will cause an upward force on the liquid at the edges ... intact, so instead of just the edges moving upward, the whole liquid surface is dragged upward.

Description : Capillary rise of mercury in a small diameter tube is proportional to (where, d = diameter of the tube, σ = surface tension of mercury) (A) d (B) 1/d (C) σ (D) 1/σ

Last Answer : (C) σ

Description : Property responsible for the talcum powder to cling to the skin is the (A) Capillary action (B) Adhesion (C) Cohesion (D) Surface tension

Last Answer : Option B

Description : Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Last Answer : Answer: Option D

Description : Which of the following is a result of Surface tension ? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : Capillary action

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : Of the capillary action phenomenon

Description : Horizontal distances obtained by thermometric observations (A) Require slope correction (B) Require tension correction (C) Require slope and tension corrections (D) Do not require slope and tension corrections

Last Answer : (D) Do not require slope and tension corrections

Description : The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Last Answer : c. Both (a) and (b)

Description : Describe an activity to observe what happens when quick lime is added to water taken in a beaker. State two important observations and name the type of reaction taking place. -Chemistry

Last Answer : Answer. Aim: To observe what happens when quicklime is added to water taken in a beaker. Materials Required:- Quicklime (calcium oxide), water, beaker.Procedure: 1. Take 5 g of calcium oxide in a ... example for each of decomposion reaction carried out with help of (i) Electricity (ii) Heat (iii)

Description : In geological studies, a fracture in the earth's surface along which movement has taken place is termed: w) tension fracture x) gash fracture y) fault z) none of these

Last Answer : ANSWER: Y -- FAULT

Description : A block of mass m is pulled along a surface as shown. The coefficient of kinetic friction between the block and the surface is m and the tension in the rope is T. The acceleration of the block is (a) a = T cos q/mg (b) a = T cos q/mgm (c) a = T cos q/m + mmg (d) None of the above

Last Answer : Ans:(d)

Description : Early granulation tissue is BEST characterized by the presence of: C A. Plasma cells and macrophages B. T lymphocytes and eosinophils C. Capillary buds and fibroblasts D. None of these

Last Answer : Capillary buds and fibroblast

Description : Why does the scientific method begin with observations?

Last Answer : Feel Free to Answer

Description : You have to observe an included angle with better accuracy than what is achievable by a vernier,  you will prefer the method of  (A) Repetition  (B) Reiteration  (C) Double observations  (D) Exactness

Last Answer : (A) Repetition 

Description : Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Last Answer : (C) Plan table surveying

Description : The hydrometer method of sedimentation analysis differs from the pipette analysis mainly in (A) The principle of test (B) The method of taking observations (C) The method of preparation of soil suspension (D) All of the above

Last Answer : (B) The method of taking observations

Description : Which of these is not a method of data collection? a. Questionnaires b. Interviews c. Experiments d. Observations

Last Answer : c. Experiments

Description : Water rises in a capillary tube to a height h. It will rise to a height more than h. a.in a lift moving up with an acceleration b.in all the above cases c.107 dynes d.at the poles e.on the surface of moon

Last Answer : e. on the surface of moon

Description : The surface joining the static levels in several non-pumping wells penetrating a continuous confined aquifer represents (a) Water-table surface (b) Capillary fringe (c) Piezometric surface of the aquifer (d) Physical top surface of the aquifer

Last Answer : (c) Piezometric surface of the aquifer

Description : Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or ... animal studies that demonstrate a significant improvement in survival with the use of such agents.

Last Answer : Answer: AB DISCUSSION: Shock due to sepsis or SIRS frequently manifests as a hyperdynamic cardiovascular response, consisting of an elevated CI and a decreased SVR or SVRI. Occasionally, ... been encouraging thus far in human clinical trials, despite the promising results from many animal studies

Description : Capillary tube method of viscosity measurement is based on the (A) Hagen-Poiseuille’s equation (B) Stoke's law (C) Navier-stokes equation (D) None of these

Last Answer : (A) Hagen-Poiseuille’s equation

Description : The coefficient of viscosity may be determined by (A) Capillary tube method (B) Orifice type viscometer (C) Rotating cylinder method (D) All of these

Last Answer : Answer: Option D

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

Description : Which of the following is NOT a significant factor in determining virulence of AA = Actinomyces actinomycetem comitans? A. It effects chemotaxis T B. Produces leukous toxins T C. Destroys collagen t D. It is immuno-suppressive Not significant

Last Answer : D. It is immuno-suppressive Not significant

Description : In Dumas’ method for estimation of nitrogen, 0.3g of an organic compound gave 50mL of nitrogen collected at 300K temperature and 715mm pressure. Calculate the percentage composition of nitrogen in the compound. (Aqueous tension at 300K=15 mm).

Last Answer : Volume of nitrogen collected at 300K and 715mm pressure is 50 mL Actual pressure = 715-15 =700 mm Volume of Nitrogen at STP=273*700*50/300*760 =41.9 ml 22400 ml of Nitrogen at STP weighs = 28 g 41.9 ml of Nitrogen weighs = 28*41.9/22400 g % of Nitrogen = 28*41.9*100/22400*0.3 = 17.45 %

Description : As per IS: 456, permissible bond stress for plain bars in tension, in working stress method, where M20, is the grade of concrete [ A ] 0.6 N/mm2 [ B ] 0.8 N/mm2 [ C ] 1.0 N/mm2 [ D ] 1.2 N/mm2

Last Answer : [ B ] 0.8 N/mm2

Description : Using the data in question 7, calculate number of observations that are two or more sample standard deviations from the sample mean. a. 0 b. 1 c. 2 d. 3

Last Answer : a. 0

Description : A sample of water from a river was analyzed for the presence of metal ions and the observations were recorded as given below `{:("Reagent added","Obse

Last Answer : A sample of water from a river was analyzed for the presence of metal ions and the observations were recorded as given ... C. `Li^(+)` D. `Mg^(2+)`

Description : Cumulative analysis for determining surface is more precise than differential analysis, because of the (A) Assumption that all particles in a single fraction are equal in size (B) Fact that screening is more ... all particles in a single fraction are equal in size, is not needed (D) None of these

Last Answer : (C) Assumption that all particles in a single fraction are equal in size, is not needed

Description : Determining the difference in elevation between two points on the surface of the earth, is known as (A) Levelling (B) Simple levelling (C) Differential levelling (D) Longitudinal levelling

Last Answer : (C) Differential levelling

Description : Describe a method of determining relative humidity ?

Last Answer : Relative humidity = a certain amount of water vapor in the air * 100.

Description : A convenient method of determining antenna impedance. A. Stub matching B. Reactance circle C. Smith chart D. Trial and error

Last Answer : C. Smith chart

Description : The method of determining the bandwidth of any processing system is ______. A. Bandwidth analysis B. Frequency spectrum C. Spectral analysis D. Frequency analysis

Last Answer : C. Spectral analysis

Description : The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Last Answer : (C) Bomb calorimeter

Description : All of the following are true regarding the Qualitative Risk Analysis process except  which one?  A. Probability and impact and expert interview are used to help correct biases that occur  in the data ... of this process used to determine  which risks need near-term response plans.

Last Answer : C. Qualitative Risk Analysis is an easy method of determining risk probability and  impact that usually takes a good deal of time to perform.

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

Description : The value of a property decreases __________ with time in straight line method of determining depreciation. (A) Linearly (B) Non-linearly (C) Exponentially (D) Logarithmically

Last Answer : A) Linearly

Description : Which of the following methods is the best method for determining nasogastric tube placement in the stomach? a) X-ray Radiologic identification of tube placement in the stomach is most reliable. ... for air bubbles is not a reliable method for determining nasogastric tube placement in the stomach.

Last Answer : a) X-ray Radiologic identification of tube placement in the stomach is most reliable.

Description : While determining the workability of concrete mix, the compaction factor test is ------than the slump cone test [ A ] Less accurate [ B ] More accurate [ C ] Approximate method [ D ] None of the above

Last Answer : [ B ] More accurate