A perfect gas (A) Does not satisfy PV = nRT (B) Is incompressible and has zero viscosity (C) Has constant specific heat (D) Can’t develop shear stresses

A perfect gas
(A) Does not satisfy PV = nRT
(B) Is incompressible and has zero viscosity
(C) Has constant specific heat
(D) Can’t develop shear stresses
by

1 Answer

Answer :

(C) Has constant specific heat
by

Related questions

The ideal gas equation is A. PV = constant B. PT = constant C. V⁄T D. PV = nRT

Description : The ideal gas equation is A. PV = constant B. PT = constant C. V⁄T D. PV = nRT

Last Answer : PV = nRT

Compressibility factor of a gas is (A) Not a function of its pressure (B) Not a function of its nature (C) Not a function of its temperature (D) Unity, if it follows PV = nRT

Description : Compressibility factor of a gas is (A) Not a function of its pressure (B) Not a function of its nature (C) Not a function of its temperature (D) Unity, if it follows PV = nRT

Last Answer : (A) Not a function of its pressure

Which of the following is the Ideal gas law (equation)?  A. V/T = K  B. V= k*(1/P)  C. P1/T1 = P2/T2  D. PV = nRT

Description : Which of the following is the Ideal gas law (equation)?  A. V/T = K  B. V= k*(1/P)  C. P1/T1 = P2/T2  D. PV = nRT

Last Answer : PV = nRT

Which of the following statements is TRUE for an ideal gas, but not for a real gas?  A. PV = nRT  B. An increase in temperature causes an increase in the kinetic energy of the gas  C. The total volume of molecules on a gas is nearly the same as the volume of the gas as a whole  D. No attractive forces exists between the molecule of a gas

Description : Which of the following statements is TRUE for an ideal gas, but not for a real gas?  A. PV = nRT  B. An increase in temperature causes an increase in the kinetic energy of the gas  C. The ... same as the volume of the gas as a whole  D. No attractive forces exists between the molecule of a gas

Last Answer : PV = nRT

General gas equation is  (a) PV=nRT  (b) PV=mRT  (d) PV = C  (c) PV=KiRT  (e) Cp-Cv = Wj

Description : General gas equation is  (a) PV=nRT  (b) PV=mRT  (d) PV = C  (c) PV=KiRT  (e) Cp-Cv = Wj

Last Answer : Answer : b

What is the name given to the equation PV=nRT? w) law of partial pressure x) ideal gas equation y) quadratic equation z) Raoult's equation

Description : What is the name given to the equation PV=nRT? w) law of partial pressure x) ideal gas equation y) quadratic equation z) Raoult's equation

Last Answer : ANSWER: X -- IDEAL GAS EQUATION

The equation, PV = nRT, is best obeyed by gases at (A) Low pressure & high temperature (B) High pressure & low temperature (C) Low pressure & low temperature (D) None of these

Description : The equation, PV = nRT, is best obeyed by gases at (A) Low pressure & high temperature (B) High pressure & low temperature (C) Low pressure & low temperature (D) None of these

Last Answer : (A) Low pressure & high temperature

Which of the following is Virial equation of state? (A) (p + a/V2)(V - b) = nRT (B) PV = nRT (C) PV = A + B/V + C/V2 + D/V3 + ... (D) None of these

Description : Which of the following is Virial equation of state? (A) (p + a/V2)(V - b) = nRT (B) PV = nRT (C) PV = A + B/V + C/V2 + D/V3 + ... (D) None of these

Last Answer : (C) PV = A + B/V + C/V2 + D/V3 + ...

The normal stress in a fluid will be constant in all directions at a point only if (A) It is incompressible (B) It has uniform viscosity (C) It has zero viscosity (D) It is at rest

Description : The normal stress in a fluid will be constant in all directions at a point only if (A) It is incompressible (B) It has uniform viscosity (C) It has zero viscosity (D) It is at rest

Last Answer : Answer: Option D

Chemistry formula PV = nRT, here , what is the meaning of R ?

Description : Chemistry formula PV = nRT, here , what is the meaning of R ?

Last Answer : Here R is the molar gas constant. The value of R is L-atm unit 0.0621 L atm mol-¹K- . The dimension of R = work / (mole × K) Thus , the amount of work or energy obtained from the standard gas per mole for 1 K temperature increase is equal to R. This is the physical significance of R.

What is the pressure of 4 moles of helium in a 50 L tank at 308 K Use PV = nRT.?

Description : What is the pressure of 4 moles of helium in a 50 L tank at 308 K Use PV = nRT.?

Last Answer : 2.02 atm (apex)

The normal stress is the same in all directions at a point in a fluid, only when the fluid (A) Is at rest & has zero viscosity (B) Is frictionless (C) Fluid layer has no motion relative to an adjacent layer of fluid (D) is incompressible & frictionless

Description : The normal stress is the same in all directions at a point in a fluid, only when the fluid (A) Is at rest & has zero viscosity (B) Is frictionless (C) Fluid layer has no motion relative to an adjacent layer of fluid (D) is incompressible & frictionless

Last Answer : (D) is incompressible & frictionless

A perfect gas (A) Has constant viscosity (B) Has zero viscosity (C) Is in compressible (D) None of the above

Description : A perfect gas (A) Has constant viscosity (B) Has zero viscosity (C) Is in compressible (D) None of the above

Last Answer : Answer: Option D

A fluid is a substance, that (A) Has to be kept in a closed container (B) Is almost incompressible (C) Has zero shear stress (D) Flows when even a small shear is applied to it

Description : A fluid is a substance, that (A) Has to be kept in a closed container (B) Is almost incompressible (C) Has zero shear stress (D) Flows when even a small shear is applied to it

Last Answer : (D) Flows when even a small shear is applied to it

The normal stress is same in all directions at a point in a fluid (A) Only when the fluid is frictionless (B) Only when the fluid is incompressible and has zero viscosity (C) When there is no motion of one fluid layer relative to an adjacent layer (D) Irrespective of the motion of one fluid layer relative to an adjacent layer

Description : The normal stress is same in all directions at a point in a fluid (A) Only when the fluid is frictionless (B) Only when the fluid is incompressible and has zero viscosity (C) When there ... to an adjacent layer (D) Irrespective of the motion of one fluid layer relative to an adjacent layer

Last Answer : Answer: Option C

The total energy of each particle at various places in the case of perfect incompressible fluid flowing in continuous stream (A) Keeps on increasing (B) Keeps on decreasing (C) Remain constant (D) May increase/decrease

Description : The total energy of each particle at various places in the case of perfect incompressible fluid flowing in continuous stream (A) Keeps on increasing (B) Keeps on decreasing (C) Remain constant (D) May increase/decrease

Last Answer : Answer: Option C

Inc case of prestressed concrete members, the bursting stresses develop at (a) Bond zone (b) Maximum bending moment zone (c ) Maximum shear stress zone (d) Anchorage zone

Description : Inc case of prestressed concrete members, the bursting stresses develop at (a) Bond zone (b) Maximum bending moment zone (c ) Maximum shear stress zone (d) Anchorage zone

Last Answer : (d) Anchorage zone

The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Description : The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Last Answer : (A) With pressure changes at constant temperature

In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Description : In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Last Answer : (C) Density does not change with pressure & temperature

According to Avogadro’s Hypothesis  (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature  (b) the sum of partial pressure of mixture of two gases is sum of the two  (c) product of the gas constant and the molecular weight of an ideal gas is constant  (d) gases have two values of specific heat  (e) all systems can be regarded as closed systems.

Description : According to Avogadro's Hypothesis  (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature  (b) the sum of partial pressure of ... gases have two values of specific heat  (e) all systems can be regarded as closed systems.

Last Answer : Answer : a

The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Description : The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Last Answer : Answer: Option C

In a static fluid (A) Resistance to shear stress is small (B) Fluid pressure is zero (C) Linear deformation is small (D) Only normal stresses can exist

Description : In a static fluid (A) Resistance to shear stress is small (B) Fluid pressure is zero (C) Linear deformation is small (D) Only normal stresses can exist

Last Answer : Answer: Option D

An ideal fluid is (A) Frictionless & incompressible (B) One, which obeys Newton's law of viscosity (C) Highly viscous (D) None of these

Description : An ideal fluid is (A) Frictionless & incompressible (B) One, which obeys Newton's law of viscosity (C) Highly viscous (D) None of these

Last Answer : (A) Frictionless & incompressible

What is constant for a substance that is considered “incompressible”?  A. Specific volume of density  B. Pressure  C. Temperature  D. All of the above

Description : What is constant for a substance that is considered “incompressible”?  A. Specific volume of density  B. Pressure  C. Temperature  D. All of the above

Last Answer : Specific volume of density

. A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid. (A) Newtonian (B) Non-Newtonian (C) Ideal (D) Incompressible

Description : . A fluid which has a linear relationship between the magnitude of applied shear-stress and the resulting rate of deformation is called a/an __________ fluid. (A) Newtonian (B) Non-Newtonian (C) Ideal (D) Incompressible

Last Answer : (A) Newtonian

A fluid is the one, which (A) Cannot remain at rest under the action of shear force (B) Continuously expands till it fills any container (C) Is incompressible (D) Permanently resists distortion

Description : A fluid is the one, which (A) Cannot remain at rest under the action of shear force (B) Continuously expands till it fills any container (C) Is incompressible (D) Permanently resists distortion

Last Answer : (A) Cannot remain at rest under the action of shear force

Potential flow is the flow of (A) Compressible fluids with shear (B) Compressible fluids with no shear (C) Incompressible fluids with shear (D) Incompressible fluids with no shear

Description : Potential flow is the flow of (A) Compressible fluids with shear (B) Compressible fluids with no shear (C) Incompressible fluids with shear (D) Incompressible fluids with no shear

Last Answer : (D) Incompressible fluids with no shear

__________ flow means the flow of incompressible fluid with no shear. (A) Potential (B) Streamline (C) Creep (D) Boundary layer

Description : __________ flow means the flow of incompressible fluid with no shear. (A) Potential (B) Streamline (C) Creep (D) Boundary layer

Last Answer : (A) Potential

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Description : Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Last Answer : (B) Viscosity

Enthalpy changes over a constant pressure path are always zero for __________ gas. (A) Any (B) A perfect (C) An easily liquefiable (D) A real

Description : Enthalpy changes over a constant pressure path are always zero for __________ gas. (A) Any (B) A perfect (C) An easily liquefiable (D) A real

Last Answer : (B) A perfect

If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Description : If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Last Answer : 13.33 ft^3/lbm

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Description : The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Last Answer : C) Work done under isothermal condition

The compressibility factor, x, is used for predicting the behavior of nonideal gases. How is the compressibility ty factor defined relative to an ideal gas? (subscript “c”refers to critical value)  A. z = P / Pc  B. z = pV/ RT  C. z = T /Tc  D. z = RT / pV Hint: for an real gases the compressibility factor, x, is an dimensionless constant given by pV=zRT. Therefore z = pV / RT

Description : The compressibility factor, x, is used for predicting the behavior of nonideal gases. How is the compressibility ty factor defined relative to an ideal gas? (subscript c refers to critical value)  A. ... compressibility factor, x, is an dimensionless constant given by pV=zRT. Therefore z = pV / RT

Last Answer : z = pV/ RT

In the equation Pv = RT, the constant of proportionality R is known as ______.  A. Universal gas constant  B. Gas constant  C. Ideal gas factor  D. Gas index

Description : In the equation Pv = RT, the constant of proportionality R is known as ______.  A. Universal gas constant  B. Gas constant  C. Ideal gas factor  D. Gas index

Last Answer : Gas constant

The bulk modulus of elasticity of a liquid (A) Is zero for incompressible liquid (B) Decreases with pressure (C) Is independent of temperature & pressure (D) Increases with pressure

Description : The bulk modulus of elasticity of a liquid (A) Is zero for incompressible liquid (B) Decreases with pressure (C) Is independent of temperature & pressure (D) Increases with pressure

Last Answer : (D) Increases with pressure

The specific cake resistance for incompressible sludges is (where ΔP = pressure drop over cake) (A) ∝ ΔP (B) ∝ 1/ ΔP (C) ∝ √ΔP (D) Independent of ΔP

Description : The specific cake resistance for incompressible sludges is (where ΔP = pressure drop over cake) (A) ∝ ΔP (B) ∝ 1/ ΔP (C) ∝ √ΔP (D) Independent of ΔP

Last Answer : (D) Independent of ΔP

An ideal flow of any fluid must satisfy (A) Pascal law (B) Newton's law of viscosity (C) Boundary layer theory (D) Continuity equation

Description : An ideal flow of any fluid must satisfy (A) Pascal law (B) Newton's law of viscosity (C) Boundary layer theory (D) Continuity equation

Last Answer : Answer: Option D

In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Description : In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Last Answer : (D) Shear stresses are generally larger than in a similar laminar flow

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

An isentropic process is the one, in which (A) pv = constant (B) pv r= constant (C) pv r = constant, and process is reversible (D) None of these

Description : An isentropic process is the one, in which (A) pv = constant (B) pv r= constant (C) pv r = constant, and process is reversible (D) None of these

Last Answer : (C) pv r = constant, and process is reversible

Which of the following is not correct for a reversible adiabatic process? (A) TV γ-1 = constant (B) p 1-γ .T Y = constant (C) PV γ = constant (D) None of these

Description : Which of the following is not correct for a reversible adiabatic process? (A) TV γ-1 = constant (B) p 1-γ .T Y = constant (C) PV γ = constant (D) None of these

Last Answer : (D) None of these

In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Description : In polytropic process (PV n = constant), if n = 1; it means a/an __________ process. (A) Adiabatic (B) Reversible (C) Isothermal (D) None of these

Last Answer : (C) Isothermal

Charles' law for gases states that (A) V/T = Constant (B) V ∝ 1/T (C) V ∝ 1/P (D) PV/T = Constant

Description : Charles' law for gases states that (A) V/T = Constant (B) V ∝ 1/T (C) V ∝ 1/P (D) PV/T = Constant

Last Answer : (A) V/T = Constant

For perfect gas a. cp – cv = R b. cp + cv = R c. cp / cv = R d. cp X cv = R Where cp & cv are specific heats at constant pressure and volume.

Description : For perfect gas a. cp – cv = R b. cp + cv = R c. cp / cv = R d. cp X cv = R Where cp & cv are specific heats at constant pressure and volume.

Last Answer : ANSWER a. CP – CV = R

An ideal gas whose specific heats are constant is called _____.  A. Perfect gas  B. Natural gas  C. Artificial gas  D. Refined gas

Description : An ideal gas whose specific heats are constant is called _____.  A. Perfect gas  B. Natural gas  C. Artificial gas  D. Refined gas

Last Answer : Perfect gas

In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d(B) d2(C) d2.5(D) d

Description : In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d (B) d 2 (C) d 2.5 (D) d

Last Answer : (C) d 2.5

With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Description : With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Last Answer : (B) Increases linearly