Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Which of the following is not a dimension-less parameter?
(A) Euler number
(B) Specific gravity
(C) Fanning friction factor
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Which of the following is dimensionless? (A) Angular velocity (B) Fanning friction factor (C) Specific volume (D) None of these

Description : Which of the following is dimensionless? (A) Angular velocity (B) Fanning friction factor (C) Specific volume (D) None of these

Last Answer : (B) Fanning friction factor

According to Reynolds analogy, Stanton number is equal to (where, f = Fanning friction factor)(A) 2f(B) f(C) f/2(D) f/4

Description : According to Reynolds analogy, Stanton number is equal to (where, f = Fanning friction factor) (A) 2f (B) f (C) f/2 (D) f/4

Last Answer : (C) f/2

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Fanning friction factor is equal to (where, fB = Blasius friction factor). (A) fB /4 (B) fB /2 (C) 4fB (D) 2fB

Description : Fanning friction factor is equal to (where, fB = Blasius friction factor). (A) fB /4 (B) fB /2 (C) 4fB (D) 2fB

Last Answer : (A) fB /4

Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Description : Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Last Answer : (A) Kozeny-Carman

What is the value of Fanning friction factor f ' for smooth pipe at NRe = 10 6 approximately? (A) 0.003 (B) 0.01 (C) 0.1(D) 0.3

Description : What is the value of Fanning friction factor f ' for smooth pipe at NRe = 10 6 approximately? (A) 0.003 (B) 0.01 (C) 0.1 (D) 0.3

Last Answer : (A) 0.003

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Description : Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Last Answer : (C) Kinematic viscosity

The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Description : The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Last Answer : (B) Froude

Euler number is defined as the ratio of inertia force to __________ force. (A) Pressure (B) Elastic (C) Gravity (D) Viscous

Description : Euler number is defined as the ratio of inertia force to __________ force. (A) Pressure (B) Elastic (C) Gravity (D) Viscous

Last Answer : (A) Pressure

Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Description : Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Last Answer : (C) Viscosity

Fluidised beds are formed, when the (A) Fluid friction is zero (B) Gravity force is less than the fluid friction (C) Pressure forces equal gravity forces (D) Sum of the fluid friction and pressure forces is equal and opposite to gravity forces

Description : Fluidised beds are formed, when the (A) Fluid friction is zero (B) Gravity force is less than the fluid friction (C) Pressure forces equal gravity forces (D) Sum of the fluid friction and pressure forces is equal and opposite to gravity forces

Last Answer : (B) Gravity force is less than the fluid friction

Which of the following is directly concerned with the heat transfer? (A) Strouhal number (B) Sherwood number (C) Euler number (D) Grashoff number

Description : Which of the following is directly concerned with the heat transfer? (A) Strouhal number (B) Sherwood number (C) Euler number (D) Grashoff number

Last Answer : (D) Grashoff number

N2 Re /NFr is called the __________ number. (A) Brinkman (B) Galileo (C) Archimedes (D) Euler

Description : N2 Re /NFr is called the __________ number. (A) Brinkman (B) Galileo (C) Archimedes (D) Euler

Last Answer : (B) Galileo

Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Description : Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Last Answer : (C) Euler

Which of the following denotes the effect of compressibility in fluid flow? (A) Weber number (B) Mach number (C) Euler number (D) Reynolds number

Description : Which of the following denotes the effect of compressibility in fluid flow? (A) Weber number (B) Mach number (C) Euler number (D) Reynolds number

Last Answer : (B) Mach numbe

The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Description : The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Last Answer : (B) Mach

The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Description : The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Last Answer : (B) Mach

Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Description : Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Last Answer : (D) Weber

The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Description : The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Last Answer : (B) Euler

Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Description : Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Last Answer : (B) Blake-Plummer equation

Is Gravity a dimension since we feel its effects, as many of us feel heat from the Sun or understand a rectangular prism?

Description : Is Gravity a dimension since we feel its effects, as many of us feel heat from the Sun or understand a rectangular prism?

Last Answer : Feeling the heat of the Sun, and feeling it’s gravity, are obviously two different things. I’m not sure if I could properly articulate, what I consider “life” to be…

In furrow irrigation the furrows must be of a. Equal dimension b. Unequal dimension c. Channels should not be parallel d. Against the gravity

Description : In furrow irrigation the furrows must be of a. Equal dimension b. Unequal dimension c. Channels should not be parallel d. Against the gravity

Last Answer : a. Equal dimension

Which of the following is the most adverse factor challenging the choice of mercury electrolytic cell process for the production of caustic soda? (A) High cost of mercury (B) High specific gravity of mercury (C) Non-availability of high purity mercury (D) Pollution of water stream by mercury

Description : Which of the following is the most adverse factor challenging the choice of mercury electrolytic cell process for the production of caustic soda? (A) High cost of mercury (B) High specific gravity of mercury (C) Non-availability of high purity mercury (D) Pollution of water stream by mercury

Last Answer : (D) Pollution of water stream by mercury

Fanning equation is given by (∆P/ρ) = 4f (L/D) (v 2 /2gc ). It is applicable to __________ region flow. (A) Transition (B) Laminar (C) Turbulent (D) Both (B) and (C)

Description : Fanning equation is given by (∆P/ρ) = 4f (L/D) (v 2 /2gc ). It is applicable to __________ region flow. (A) Transition (B) Laminar (C) Turbulent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The equation f -0.5 = 4.07 loge (NRe √f) -0.6 is called the __________.(A) Colebrook formula (B) Von-Karman equation (C) Fanning equation (D) None of these

Description : The equation f -0.5 = 4.07 loge (NRe √f) -0.6 is called the __________. (A) Colebrook formula (B) Von-Karman equation (C) Fanning equation (D) None of these

Last Answer : (B) Von-Karman equation

Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Description : Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Last Answer : (B) Kozeny - Karman equation

Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Description : Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Last Answer : (D) None of these

Which statement represents the following Euler diagram?

Description : Which statement represents the following Euler diagram?

Last Answer : If someone lives in Austin, then that person lives in Texas.

Pure Buckling uses the equation of (a) Rankin-Gordon (b) Euler (c) Stiffness (d) None

Description : Pure Buckling uses the equation of (a) Rankin-Gordon (b) Euler (c) Stiffness (d) None

Last Answer : (b) Euler

Which of the following connected simple graph has exactly one spanning tree? (A) Complete graph (B) Hamiltonian graph (C) Euler graph (D) None of the above

Description : Which of the following connected simple graph has exactly one spanning tree? (A) Complete graph (B) Hamiltonian graph (C) Euler graph (D) None of the above

Last Answer : (D) None of the above

Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Description : Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Description : Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Last Answer : (B) Kinematic viscosity

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

A suspended particle falls through a height minutes. If the viscosity of water is and specific gravity of the particle is , the diameter of the particle is (where M is a constant factor) (A) 103M (H/t) (B) 104M (H/t) (C) 105M (H/t) (D) 102M (H/t)

Description : A suspended particle falls through a height minutes. If the viscosity of water is and specific gravity of the particle is , the diameter of the particle is (where M is a constant factor) (A) 103M (H/t) (B) 104M (H/t) (C) 105M (H/t) (D) 102M (H/t)

Last Answer : Answer: Option C

For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has the dimension of length (C) Is always less than 1 (D) Is the ratio of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Description : For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has ... of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Last Answer : (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle

What's your opinion on whether you think Elle Fanning has had a nose job?

Description : What's your opinion on whether you think Elle Fanning has had a nose job?

Last Answer : Who cares?

Explain any four proper fanning techniques which can be used for soil conservation. -SST 10th

Description : Explain any four proper fanning techniques which can be used for soil conservation. -SST 10th

Last Answer : Soil conservation includes all those measures which help in protecting the soil from erosion or degradation. (i) Crop rotation : If the same crop is sown in the same field, year ... have contributed significantly to the stabilisation of sand dunes and in establishing the desert in western India.

What was Col James Fanning the commander of the garrison at?

Description : What was Col James Fanning the commander of the garrison at?

Last Answer : Need answer

Which of the following is a Bio-logical method of soil conservations? (1) Contour fanning (2) Contour terracing (3) Gully control (4) Basin listing

Description : Which of the following is a Bio-logical method of soil conservations? (1) Contour fanning (2) Contour terracing (3) Gully control (4) Basin listing

Last Answer : (1) Contour fanning Explanation: The biological methods of soil conservation include contour farming, strip cropping, tillage operation, mulching, etc. Contour farming is practiced in the hilly regions or on ... the soil. It reduces run off, saves more water for crops, and reduces soil erosion.

The open "Sigrees” or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the surroundings of sigrees (3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Description : The open "Sigrees or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the ... 3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Last Answer : (1) tendency of carbon dioxide to form a layer along with dust smoke Explanation: Burning coal requires oxygen to chemically react. The availability of oxygen is limited in the furnace by several factors ... dioxide from forming layer along with dust smoke so as to keep the supply of oxygen intact.

Growing of two or more crops simultaneously on the same piece of land is called? a. Fanning b. Intercropping c. Mixed Cropping d. Mixed Farming e. None of these

Description : Growing of two or more crops simultaneously on the same piece of land is called? a. Fanning b. Intercropping c. Mixed Cropping d. Mixed Farming e. None of these

Last Answer : c. Mixed Cropping

Growing of two or more crops simultaneously on the same piece of land is called (a) mixed cropping (b) mixed farming (c) intercropping (d) fanning

Description : Growing of two or more crops simultaneously on the same piece of land is called (a) mixed cropping (b) mixed farming (c) intercropping (d) fanning

Last Answer : (a) mixed cropping

A girl ate sweets while fanning the flies away. Due to this, she suffered from a which disease? —

Description : A girl ate sweets while fanning the flies away. Due to this, she suffered from a which disease? —

Last Answer : Cholera

‘Fanning’ smokestack plumes are observed when A. There is an inversion above the ground surface. B. There is unstable atmosphere. C. There is neutrally stable atmosphere. D. The stack height is below an inversion layer.

Description : ‘Fanning’ smokestack plumes are observed when A. There is an inversion above the ground surface. B. There is unstable atmosphere. C. There is neutrally stable atmosphere. D. The stack height is below an inversion layer.

Last Answer : A. There is an inversion above the ground surface

The open "Sigrees" or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the surroundings of sigrees (3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Description : The open "Sigrees" or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the ... 3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Last Answer : tendency of carbon dioxide to form a layer along with dust smoke

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.