Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Which parameter is used for the grading of paraffin waxes?
(A) Specific gravity
(B) Melting point
(C) Viscosity
(D) Penetration number
by

1 Answer

Answer :

(C) Viscosity
by

Related questions

Increase in the specific gravity of petroleum products indicates (A) Decrease in paraffin content (B) Increase in thermal energy per unit weight

Description : Increase in the specific gravity of petroleum products indicates (A) Decrease in paraffin content (B) Increase in thermal energy per unit weight

Last Answer : (A) Decrease in paraffin content

The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Description : The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Last Answer : (A) Increases

A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Description : A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70

Last Answer : Answer: Option B

Waxes present in petroleum products (A) Can be separated out by distillation(B) Are not soluble in them(C) Crystallise out at low temperature(D) Decrease their viscosity

Description : Waxes present in petroleum products (A) Can be separated out by distillation (B) Are not soluble in them (C) Crystallise out at low temperature (D) Decrease their viscosity

Last Answer : (C) Crystallise out at low temperature

The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Description : The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Last Answer : Answer: Option D

Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Description : Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Last Answer : (D) None of these

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Description : Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Last Answer : (D) None of these

Fats differ from waxes in that fats have : (a) More unsaturation (b) Higher melting points (c) A glycerol backbone (d) Longer fatty acids

Description : Fats differ from waxes in that fats have : (a) More unsaturation (b) Higher melting points (c) A glycerol backbone (d) Longer fatty acids

Last Answer : A glycerol backbone

Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Description : Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Last Answer : (D) All 'a', 'b' & 'c

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : (2) Melting point Explanation: The fuse wire is based on the Joules law of heating which says that when the electric current is allowed to pass through a conductor, the conductor heats up and is ... . For this purpose the material used as fuse wire should have high resistance and low melting point.

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : Melting point

Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Description : Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Last Answer : (A) Calorific value

Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Description : Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Last Answer : (A) Increase

Penetration test determines the __________ of the grease. (A) Stiffness (B) Lubricating properties (e.g. oilness) (C) Service temperature (D) Variation in viscosity with temperature

Description : Penetration test determines the __________ of the grease. (A) Stiffness (B) Lubricating properties (e.g. oilness) (C) Service temperature (D) Variation in viscosity with temperature

Last Answer : (A) Stiffness

Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Description : Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Last Answer : (A) °API gravity

Lane and Garton classification of petroleum is based on its (A) Composition (B) Specific gravity (C) Optical properties (D) Viscosity

Description : Lane and Garton classification of petroleum is based on its (A) Composition (B) Specific gravity (C) Optical properties (D) Viscosity

Last Answer : (B) Specific gravity

The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Description : The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Last Answer : (B) Sand (40%)

A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) Same as that of A (B) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Description : A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) ... ) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Last Answer : (B) One fourth as that of A

Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Description : Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Last Answer : (B) Viscosity

Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Description : Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Last Answer : (C) Kinematic viscosity

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength

Penetration test on bitumen is used for determining its (A) Grade (B) Viscosity (C) Ductility (D) Temperature susceptibilit

Description : Penetration test on bitumen is used for determining its (A) Grade (B) Viscosity (C) Ductility (D) Temperature susceptibilit

Last Answer : Answer: Option A

Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Description : Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Last Answer : ANSWER: A

Materials for rain proof coats and tents owe their water proof properties to – (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Description : Materials for rain proof coats and tents owe their water proof properties to – (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Last Answer : (1) Surface tension Explanation: Materials for rain proof coats and tents owe their water proof properties to Surface Tension. The surface of a liquid behaves like an elastic membrane and therefore, has a tendency to contract. This property of liquid is called Surface Tension.

Material for rain-proof coats and tents owe their water proof properties to ----? A. Surface tension (Answer) B. Viscosity C. Specific gravity D. Elasticity

Description : Material for rain-proof coats and tents owe their water proof properties to ----? A. Surface tension (Answer) B. Viscosity C. Specific gravity D. Elasticity

Last Answer : A. Surface tension (Answer)

If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

A suspended particle falls through a height minutes. If the viscosity of water is and specific gravity of the particle is , the diameter of the particle is (where M is a constant factor) (A) 103M (H/t) (B) 104M (H/t) (C) 105M (H/t) (D) 102M (H/t)

Description : A suspended particle falls through a height minutes. If the viscosity of water is and specific gravity of the particle is , the diameter of the particle is (where M is a constant factor) (A) 103M (H/t) (B) 104M (H/t) (C) 105M (H/t) (D) 102M (H/t)

Last Answer : Answer: Option C

Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Description : Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Last Answer : Answer: Option B

The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke

Description : The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke

Last Answer : Answer: Option A

Materials for rain proof coats and tents owe their water proof properties to (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Description : Materials for rain proof coats and tents owe their water proof properties to (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Last Answer : Surface tension

Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Description : Compare water and oil of specific gravity 0.8 on the basis of density & viscosity.

Last Answer : Here it is not possible to find out viscosity

Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Description : Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Last Answer : (B) Paraffins have lower smoke point than aromatics

Many food brokers are more accurately described as manufacturers' agents because they A)handle food products from a single manufacturer. B)provide assistance in grading, negotiating, and inspecting foods. C)have specialised knowledge of a particular commodity. D)provide services on a somewhat permanent basis and operate in specific geographic territories. E)charge higher commissions than most other brokers.

Description : Many food brokers are more accurately described as manufacturers' agents because they A)handle food products from a single manufacturer. B)provide assistance in grading, negotiating, and ... and operate in specific geographic territories. E)charge higher commissions than most other brokers.

Last Answer : D)provide services on a somewhat permanent basis and operate in specific geographic territories

Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Description : Aniline point test of an oil qualitatively indicates the __________ content of an oil. (A) Paraffin (B) Olefin (C) Aromatic (D) Naphthene

Last Answer : (C) Aromatic

Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Description : Aniline point of the diesel is a measure of its __________ content. (A) Aromatic (B) Paraffin (C) Olefin (D) Naphthene

Last Answer : (B) Paraffin

Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Description : Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Last Answer : (B) Mercaptans

Size reduction of __________ is accomplished in steam heated rollers and roll crushers. (A) Resins (B) Gums (C) Hard rubber (D) Waxes

Description : Size reduction of __________ is accomplished in steam heated rollers and roll crushers. (A) Resins (B) Gums (C) Hard rubber (D) Waxes

Last Answer : (C) Hard rubber

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The time taken for gravity flow of a fixed volume of liquid (as in Redwood viscometer) is directly proportional to its (A) Absolute viscosity (B) Ratio of absolute viscosity to density (C) Density (D) Reynolds number

Description : The time taken for gravity flow of a fixed volume of liquid (as in Redwood viscometer) is directly proportional to its (A) Absolute viscosity (B) Ratio of absolute viscosity to density (C) Density (D) Reynolds number

Last Answer : (B) Ratio of absolute viscosity to density

Existence of boundary layer in fluid flow is because of the (A) Surface tension (B) Fluid density (C) Fluid viscosity (D) Gravity forces

Description : Existence of boundary layer in fluid flow is because of the (A) Surface tension (B) Fluid density (C) Fluid viscosity (D) Gravity forces

Last Answer : (C) Fluid viscosity

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Which of the following is not true of enantiomers? (a) They have the same melting point. (b) They have the same boiling point. (c) They have the same density. (d) They have the same specific rotation.

Description : Which of the following is not true of enantiomers? (a) They have the same melting point. (b) They have the same boiling point. (c) They have the same density. (d) They have the same specific rotation.

Last Answer : They have the same specific rotation.

The material used for fuse must have (a) low melting point and high specific resistance (b) low melting point and -low specific resistance (c) high melting point and low specific resistance (d) low melting point and any specific resistance

Description : The material used for fuse must have (a) low melting point and high specific resistance (b) low melting point and -low specific resistance (c) high melting point and low specific resistance (d) low melting point and any specific resistance

Last Answer : (a) low melting point and high specific resistance

Define the following: i) Melting point i) Specific heat iii) Heat capacity iv) Dielectric constant.

Description : Define the following: i) Melting point i) Specific heat iii) Heat capacity iv) Dielectric constant.

Last Answer : Definition: i) Melting point - The melting point of a material is the temperature at which it changes state from solid to liquid at normal atmospheric pressure. The temperature at which a solid ... It is an amount measuring the ability of a material to store electrical in an electric field.

Is there really a difference in car waxes? Which would you recommend?

Description : Is there really a difference in car waxes? Which would you recommend?

Last Answer : Holy crap. I just waxed my car with Turtle Wax Ice, and I can't tell you how amazing it is. I used to use just the regular old Turtle Wax (the stuff that dries to a white film), and it was good ... it was worth it. I lurve waxing my car. It is one of the things I look forward to every summer.

What do you mean by waxes? -Biology

Description : What do you mean by waxes? -Biology

Last Answer : answer:

What is the indicator for fats oils and waxes?

Description : What is the indicator for fats oils and waxes?

Last Answer : Need answer

Esters of fatty acids with higher alcohol other than glycerol are called as (A) Oils (B) Polyesters (C) Waxes (D) Terpenoids

Description : Esters of fatty acids with higher alcohol other than glycerol are called as (A) Oils (B) Polyesters (C) Waxes (D) Terpenoids

Last Answer : Answer : C

Waxes contain higher alcohols named as (A) Methyl (B) Ethyl (C) Phytyl (D) Cetyl

Description : Waxes contain higher alcohols named as (A) Methyl (B) Ethyl (C) Phytyl (D) Cetyl

Last Answer : Answer : D