Fluidised beds are formed, when the (A) Fluid friction is zero (B) Gravity force is less than the fluid friction (C) Pressure forces equal gravity forces (D) Sum of the fluid friction and pressure forces is equal and opposite to gravity forces

Fluidised beds are formed, when the
(A) Fluid friction is zero
(B) Gravity force is less than the fluid friction
(C) Pressure forces equal gravity forces
(D) Sum of the fluid friction and pressure forces is equal and opposite to
gravity forces
by

1 Answer

Answer :

(B) Gravity force is less than the fluid friction
by

Related questions

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Description : Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Last Answer : (C) Shallow beds of solids and proper choice of particle size

Which of the following forces does not act on a fluid at rest? (A) Viscous force (B) Gravity force (C) Hydrostatic force (D) Surface tension force

Description : Which of the following forces does not act on a fluid at rest? (A) Viscous force (B) Gravity force (C) Hydrostatic force (D) Surface tension force

Last Answer : (A) Viscous force

two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Description : two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Last Answer : (B) Each force must be zero

Which of the following fluid forces are not considered in the Navier￾Stoke's equation? (A) Gravity forces (B) Viscous forces (C) Pressure forces (D) Turbulent forces

Description : Which of the following fluid forces are not considered in the Navier￾Stoke's equation? (A) Gravity forces (B) Viscous forces (C) Pressure forces (D) Turbulent forces

Last Answer : (D) Turbulent forces

In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Description : In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Last Answer : (B) Temperature is more or less uniform

The fluid forces considered in the Navier Stokes equation are (A) Gravity, pressure and viscous (B) Gravity, pressure and turbulent (C) Pressure, viscous and turbulent (D) Gravity, viscous and turbulent

Description : The fluid forces considered in the Navier Stokes equation are (A) Gravity, pressure and viscous (B) Gravity, pressure and turbulent (C) Pressure, viscous and turbulent (D) Gravity, viscous and turbulent

Last Answer : Answer: Option A

According to principle of moments (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero (B) If a system of coplanar forces is in equilibrium, then the algebraic sum of their moments about any point in their plane is zero (C) The algebraic sum of the moments of any two forces about any point is equal to moment of their resultant about the same point (D) Positive and negative couples can be balanced

Description : According to principle of moments  (A) If a system of coplanar forces is in equilibrium, then their algebraic sum is zero  (B) If a system of coplanar forces is in equilibrium, then the ... of  their resultant about the same point  (D) Positive and negative couples can be balanced

Last Answer : (C) The algebraic sum of the moments of any two forces about any point is equal to moment of  their resultant about the same point 

A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero

For a body to be in equilibrium, which of the following conditions must exist? w) no forces may be acting on the body. x) the body must be accelerating. y) the velocity of the body must be zero. z) the sum of the forces acting on the body must be equal to zero.

Description : For a body to be in equilibrium, which of the following conditions must exist? w) no forces may be acting on the body. x) the body must be accelerating. y) the velocity of the body must be zero. z) the sum of the forces acting on the body must be equal to zero. 

Last Answer : ANSWER: Z -- THE SUM OF THE FORCES ACTING ON THE BODY MUST BE EQUAL TO ZERO.

The minimum number of forces with unequal magnitudes whose vector sum can equal zero is: w) 1 x) 2 y) 3 z) 4

Description : The minimum number of forces with unequal magnitudes whose vector sum can equal zero is: w) 1 x) 2 y) 3 z) 4

Last Answer : ANSWER: Y -- 3

A moving body on Earth ordinarily comes to rest by itself because of the (a) Law of inertia (b) Forces of friction (c) Conservation of momentum (d) Gravity

Description : A moving body on Earth ordinarily comes to rest by itself because of the (a) Law of inertia (b) Forces of friction (c) Conservation of momentum (d) Gravity

Last Answer : Ans:(b)

If you throw a ball across a field, which forces are most likely to cause it to stop? a) Inertia and Magnetism b) Friction and Gravity c) Wind resistance and magnetism d) Gravity and Inertia

Description : If you throw a ball across a field, which forces are most likely to cause it to stop? a) Inertia and Magnetism b) Friction and Gravity c) Wind resistance and magnetism d) Gravity and Inertia

Last Answer : b) Friction and Gravity

Two particles are called to be equal settling, if they are having the same. (A) Size (B) Specific gravity (C) Terminal velocities in the same fluid & in the same field of force (D) None of these

Description : Two particles are called to be equal settling, if they are having the same. (A) Size (B) Specific gravity (C) Terminal velocities in the same fluid & in the same field of force (D) None of these

Last Answer : (C) Terminal velocities in the same fluid & in the same field of force

Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Description : Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Last Answer : (B) Greater than

What is geostrophic balance? (a) The exact balance of incoming SW and outgoing LW radiation at the top of the atmosphere. (b) The exact balance of vertical pressure gradient and gravity in the atmosphere. (c) The exact balance of the Coriolis force, horizontal pressure gradient force and friction. (d) The exact balance of the Coriolis force and the horizontal pressure gradient force.

Description : What is geostrophic balance? (a) The exact balance of incoming SW and outgoing LW radiation at the top of the atmosphere. (b) The exact balance of vertical pressure gradient and gravity in ... friction. (d) The exact balance of the Coriolis force and the horizontal pressure gradient force.

Last Answer : (d) The exact balance of the Coriolis force and the horizontal pressure gradient force.

__________ forces act on a particle moving through a stationary fluid(A) Gravity(B) Drag(C) Buoyant(D) All (A), (B), & (C)

Description : __________ forces act on a particle moving through a stationary fluid (A) Gravity (B) Drag (C) Buoyant (D) All (A), (B), & (C)

Last Answer : (D) All (A), (B), & (C)

Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Description : Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Last Answer : (A) Elastic

Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Description : Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Last Answer : A) Elastic

Existence of boundary layer in fluid flow is because of the (A) Surface tension (B) Fluid density (C) Fluid viscosity (D) Gravity forces

Description : Existence of boundary layer in fluid flow is because of the (A) Surface tension (B) Fluid density (C) Fluid viscosity (D) Gravity forces

Last Answer : (C) Fluid viscosity

With decrease in particle size to be fluidised by a particular fluid, the operating range of fluidisation velocity (A) Widens (B) Squeezes (C) Does not change (D) Unpredictable from the data

Description : With decrease in particle size to be fluidised by a particular fluid, the operating range of fluidisation velocity (A) Widens (B) Squeezes (C) Does not change (D) Unpredictable from the data

Last Answer : (C) Does not change

The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

_________ fluid force is not considered in the Navier-Stokes equation. (A) Turbulent (B) Viscous (C) Gravity (D) Pressure

Description : _________ fluid force is not considered in the Navier-Stokes equation. (A) Turbulent (B) Viscous (C) Gravity (D) Pressure

Last Answer : (A) Turbulent

The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Description : The center of pressure of a surface subjected to fluid pressure is the point (A) On the surface at which resultant pressure acts (B) On the surface at which gravitational force acts (C) At which all hydraulic forces meet (D) Similar to metacentre

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The tides at any place occur a little less than 1 hour later, each succeeding day (B) The influence of the earth's gravity alone produces level-tidal less sea (C) The spinning force is maximum at the equator and zero at the poles (D) All of the above

Description : Pick up the correct statement from the following: (A) The tides at any place occur a little less than 1 hour later, each succeeding day (B) The influence of the earth's gravity alone produces level-tidal ... ) The spinning force is maximum at the equator and zero at the poles (D) All of the above

Last Answer : (D) All of the above

Pair of forces that cause steering wheel of a car to rotate is called A. couple B. friction C. normal force D. weight

Description :  Pair of forces that cause steering wheel of a car to rotate is called A. couple B. friction C. normal force D. weight

Last Answer : couple

Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Description : Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Last Answer : (D) None of these

If a Normal Force (Fn) is equal and opposite to gravity then why do objects fall?

Description : If a Normal Force (Fn) is equal and opposite to gravity then why do objects fall?

Last Answer : They fall because the "Fn" is not present until the object is resting on the Earth's surface. Air can not transmit this force.

Minimum porosity for fluidisation is(A) That corresponding to static bed (B) That corresponding to completely fluidised bed (C) The porosity of the bed when true fluidisation begins (D) Less than that of the' static bed

Description : Minimum porosity for fluidisation is (A) That corresponding to static bed (B) That corresponding to completely fluidised bed (C) The porosity of the bed when true fluidisation begins (D) Less than that of the' static bed

Last Answer : (C) The porosity of the bed when true fluidisation begins

If the gravity exerts 15 N and there is 10 N of friction how much force will Jim need to exert to move it?

Description : If the gravity exerts 15 N and there is 10 N of friction how much force will Jim need to exert to move it?

Last Answer : Need answer

Only force acting on a bouncing ball is A. gravity B. weight of ball C. friction D. a and b both

Description : Only force acting on a bouncing ball is A. gravity B. weight of ball C. friction D. a and b both

Last Answer : a and b both

A number of forces acting at a point will be in equilibrium if a.Sum of the forces is zero b.Algebraic sum of the forces is zero c.Sum of the resolved parts in any two perpendicular directions are both zero d.None of the above e.The metacentre of the body

Description : A number of forces acting at a point will be in equilibrium if a.Sum of the forces is zero b.Algebraic sum of the forces is zero c.Sum of the resolved parts in any two perpendicular directions are both zero d.None of the above e.The metacentre of the body

Last Answer : d. None of the above

The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Description : The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above

Last Answer : d. All the above

Reactions at the supports of a structure can be determined by equating the algebraic sum of (A) Horizontal forces to zero (B) Vertical forces to zero (C) Moment about any point to zero (D) All the above

Description : Reactions at the supports of a structure can be determined by equating the algebraic sum of (A) Horizontal forces to zero (B) Vertical forces to zero (C) Moment about any point to zero (D) All the above

Last Answer : (D) All the above

Which of the following sets of 3 forces CANNOT have a vector sum of zero? w) 10, 10 and 10 Newtons x) 10, 10 and 20 Newtons y) 10, 20 and 20 Newtons z) 10, 20 and 40 Newtons

Description : Which of the following sets of 3 forces CANNOT have a vector sum of zero? w) 10, 10 and 10 Newtons x) 10, 10 and 20 Newtons y) 10, 20 and 20 Newtons z) 10, 20 and 40 Newtons

Last Answer : ANSWER: Z -- 10, 20 AND 40 NEWTONS

The line of action of the buoyant force passes through the centre of gravity of the (A) Submerged body (B) Displaced volume of the fluid (C) Volume of fluid vertically above the body (D) Horizontal projection of the body

Description : The line of action of the buoyant force passes through the centre of gravity of the (A) Submerged body (B) Displaced volume of the fluid (C) Volume of fluid vertically above the body (D) Horizontal projection of the body

Last Answer : (B) Displaced volume of the fluid

The line of action of the buoyant force acts through the (A) Centroid of the displaced volume of fluid (B) Centre of gravity of a submerged body (C) Centroid of the volume of any floating body (D) None of these

Description : The line of action of the buoyant force acts through the (A) Centroid of the displaced volume of fluid (B) Centre of gravity of a submerged body (C) Centroid of the volume of any floating body (D) None of these

Last Answer : (A) Centroid of the displaced volume of fluid

Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Description : Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Last Answer : (A) It cannot burn low grade coal

According to principle of transmissibility of forces, the effect of a force upon a body is (A) Maximum when it acts at the center of gravity of a body (B) Different at different points in its line of action (C) The same at every point in its line of action (D) Minimum when it acts at the C.G. of the body

Description : According to principle of transmissibility of forces, the effect of a force upon a body is (A) Maximum when it acts at the center of gravity of a body (B) Different at different points in its line of action ... at every point in its line of action (D) Minimum when it acts at the C.G. of the body

Last Answer : (C) The same at every point in its line of action

Pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Gravity (B) Inertial (C) Viscous (D) None of these

Description : Pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Gravity (B) Inertial (C) Viscous (D) None of these

Last Answer : (B) Inertial

The pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Viscous (B) Inertial (C) Gravity (D) Surface tension

Description : The pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Viscous (B) Inertial (C) Gravity (D) Surface tension

Last Answer : (A) Viscous

The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Description : The shear force on a simply supported beam is proportional to (A) Displacement of the neutral axis (B) Sum of the forces (C) Sum of the transverse forces (D) Algebraic sum of the transverse forces of the section

Last Answer : (D) Algebraic sum of the transverse forces of the section

. A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Last Answer : (A) 4.4 KPa

Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Last Answer : (B) 60

Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Last Answer : (B) Tubular flow reactor

Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Description : Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Last Answer : (A) Uniformity of temperature

It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and opposite pressure acts from inside (Answer) B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Description : It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and ... B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Last Answer : A. An equal and opposite pressure acts from inside (Answer)

Colloid osmotic pressure of intracellular fluid is (A) Equal to that of plasma (B) More than that of plasma (C) More than that of plasma (D) Nearly zero WATER AND ELECTROLYTE BALANCE 285

Description : Colloid osmotic pressure of intracellular fluid is (A) Equal to that of plasma (B) More than that of plasma (C) More than that of plasma (D) Nearly zero WATER AND ELECTROLYTE BALANCE 285

Last Answer : Answer : B

Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Description : Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Last Answer : Answer: Option D