Fanning friction factor is equal to (where, fB = Blasius friction factor). (A) fB /4 (B) fB /2 (C) 4fB (D) 2fB

Fanning friction factor is equal to (where, fB = Blasius friction factor).
(A) fB
/4
(B) fB
/2
(C) 4fB
(D) 2fB
by

1 Answer

Answer :

(A) fB
/4
by

Related questions

If d is the diameter of a bar, ft is allowable tensile stress and fb, is allowable bond stress, the bond length is given by (A) ft .d/4fb (B) ( /4). (ft .d/fb) (C) ft .d²/fb (D) ( /4). (ft .d 3 /fb)

Description : If d is the diameter of a bar, ft is allowable tensile stress and fb, is allowable bond stress, the bond length is given by (A) ft .d/4fb (B) ( /4). (ft .d/fb) (C) ft .d²/fb (D) ( /4). (ft .d 3 /fb)

Last Answer : Answer: Option A

According to Reynolds analogy, Stanton number is equal to (where, f = Fanning friction factor)(A) 2f(B) f(C) f/2(D) f/4

Description : According to Reynolds analogy, Stanton number is equal to (where, f = Fanning friction factor) (A) 2f (B) f (C) f/2 (D) f/4

Last Answer : (C) f/2

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Description : Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Description : Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Last Answer : (A) Kozeny-Carman

Which of the following is dimensionless? (A) Angular velocity (B) Fanning friction factor (C) Specific volume (D) None of these

Description : Which of the following is dimensionless? (A) Angular velocity (B) Fanning friction factor (C) Specific volume (D) None of these

Last Answer : (B) Fanning friction factor

What is the value of Fanning friction factor f ' for smooth pipe at NRe = 10 6 approximately? (A) 0.003 (B) 0.01 (C) 0.1(D) 0.3

Description : What is the value of Fanning friction factor f ' for smooth pipe at NRe = 10 6 approximately? (A) 0.003 (B) 0.01 (C) 0.1 (D) 0.3

Last Answer : (A) 0.003

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Colebrook equation for friction factor in turbulent flow is given by, f -0.5 = -4 loge [(ε/D) + (1.26/NRe √F). It reduces to Nikuradse equation for a value of (ϵ/D) equal to (A) 0(B) 1 (C) ∞ (D) 0.5

Description : Colebrook equation for friction factor in turbulent flow is given by, f -0.5 = -4 loge [(ε/D) + (1.26/NRe √F). It reduces to Nikuradse equation for a value of (ϵ/D) equal to (A) 0 (B) 1 (C) ∞ (D) 0.5

Last Answer : (B) 1

Fanning equation is given by (∆P/ρ) = 4f (L/D) (v 2 /2gc ). It is applicable to __________ region flow. (A) Transition (B) Laminar (C) Turbulent (D) Both (B) and (C)

Description : Fanning equation is given by (∆P/ρ) = 4f (L/D) (v 2 /2gc ). It is applicable to __________ region flow. (A) Transition (B) Laminar (C) Turbulent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The equation f -0.5 = 4.07 loge (NRe √f) -0.6 is called the __________.(A) Colebrook formula (B) Von-Karman equation (C) Fanning equation (D) None of these

Description : The equation f -0.5 = 4.07 loge (NRe √f) -0.6 is called the __________. (A) Colebrook formula (B) Von-Karman equation (C) Fanning equation (D) None of these

Last Answer : (B) Von-Karman equation

Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Description : Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Last Answer : (B) Blake-Plummer equation

Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Description : Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Last Answer : (B) Kozeny - Karman equation

Capacitor is fully charged if potential difference is equal toA. e.m.fB. currentC. resistanceD. power

Description : Capacitor is fully charged if potential difference is equal toA. e.m.f B. current C. resistance D. power

Last Answer : e.m.f

What's your opinion on whether you think Elle Fanning has had a nose job?

Description : What's your opinion on whether you think Elle Fanning has had a nose job?

Last Answer : Who cares?

Explain any four proper fanning techniques which can be used for soil conservation. -SST 10th

Description : Explain any four proper fanning techniques which can be used for soil conservation. -SST 10th

Last Answer : Soil conservation includes all those measures which help in protecting the soil from erosion or degradation. (i) Crop rotation : If the same crop is sown in the same field, year ... have contributed significantly to the stabilisation of sand dunes and in establishing the desert in western India.

What was Col James Fanning the commander of the garrison at?

Description : What was Col James Fanning the commander of the garrison at?

Last Answer : Need answer

Which of the following is a Bio-logical method of soil conservations? (1) Contour fanning (2) Contour terracing (3) Gully control (4) Basin listing

Description : Which of the following is a Bio-logical method of soil conservations? (1) Contour fanning (2) Contour terracing (3) Gully control (4) Basin listing

Last Answer : (1) Contour fanning Explanation: The biological methods of soil conservation include contour farming, strip cropping, tillage operation, mulching, etc. Contour farming is practiced in the hilly regions or on ... the soil. It reduces run off, saves more water for crops, and reduces soil erosion.

The open "Sigrees” or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the surroundings of sigrees (3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Description : The open "Sigrees or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the ... 3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Last Answer : (1) tendency of carbon dioxide to form a layer along with dust smoke Explanation: Burning coal requires oxygen to chemically react. The availability of oxygen is limited in the furnace by several factors ... dioxide from forming layer along with dust smoke so as to keep the supply of oxygen intact.

Growing of two or more crops simultaneously on the same piece of land is called? a. Fanning b. Intercropping c. Mixed Cropping d. Mixed Farming e. None of these

Description : Growing of two or more crops simultaneously on the same piece of land is called? a. Fanning b. Intercropping c. Mixed Cropping d. Mixed Farming e. None of these

Last Answer : c. Mixed Cropping

Growing of two or more crops simultaneously on the same piece of land is called (a) mixed cropping (b) mixed farming (c) intercropping (d) fanning

Description : Growing of two or more crops simultaneously on the same piece of land is called (a) mixed cropping (b) mixed farming (c) intercropping (d) fanning

Last Answer : (a) mixed cropping

A girl ate sweets while fanning the flies away. Due to this, she suffered from a which disease? —

Description : A girl ate sweets while fanning the flies away. Due to this, she suffered from a which disease? —

Last Answer : Cholera

‘Fanning’ smokestack plumes are observed when A. There is an inversion above the ground surface. B. There is unstable atmosphere. C. There is neutrally stable atmosphere. D. The stack height is below an inversion layer.

Description : ‘Fanning’ smokestack plumes are observed when A. There is an inversion above the ground surface. B. There is unstable atmosphere. C. There is neutrally stable atmosphere. D. The stack height is below an inversion layer.

Last Answer : A. There is an inversion above the ground surface

The open "Sigrees" or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the surroundings of sigrees (3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Description : The open "Sigrees" or coal stoves often require fanning to sustain burning because of (1) tendency of carbon dioxide to form a layer along with dust smoke (2) lack of oxygen in the ... 3) accumulation of smoke and dust over the sigrees (4) interrupted release of moisture from the material

Last Answer : tendency of carbon dioxide to form a layer along with dust smoke

Reynold's analogy states that (where, St = Stanton number f = friction factor) (A) St = f/2 (B) St = f/4 (C) St = 4f (D) St = f 1/2

Description : Reynold's analogy states that (where, St = Stanton number f = friction factor) (A) St = f/2 (B) St = f/4 (C) St = 4f (D) St = f 1/2

Last Answer : (A) St = f/2

All analogy equations connecting friction factor and heat transfer co￾efficient apply only to (A) Wall or skin friction (B) Form friction (C) Both (A) and (B) (D) Turbulent flow

Description : All analogy equations connecting friction factor and heat transfer co￾efficient apply only to (A) Wall or skin friction (B) Form friction (C) Both (A) and (B) (D) Turbulent flow

Last Answer : (A) Wall or skin friction

The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Description : The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Last Answer : (A) Depends only on Reynolds number

The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Description : The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Last Answer : (D) None of these

During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Description : During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Last Answer : (D) Absolute roughness increases linearly with time

Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Description : Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Last Answer : (A) Increase

Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge(B) Length & discharge(C) Length & diameter(D) Friction factor & diameter

Description : Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge (B) Length & discharge (C) Length & diameter (D) Friction factor & diameter

Last Answer : (A) Head & discharge

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Description : Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Last Answer : (C) Reynold number, relative roughness and head loss

A pipe is defined as 'hydraulically smooth', if the friction factor (A) Is not a function of Reynolds number (B) For a given Reynolds number remains constant even on further smoothening of the pipe (C) Is zero irrespective of the Reynolds number (D) None of these

Description : A pipe is defined as 'hydraulically smooth', if the friction factor (A) Is not a function of Reynolds number (B) For a given Reynolds number remains constant even on further smoothening of the pipe (C) Is zero irrespective of the Reynolds number (D) None of these

Last Answer : (B) For a given Reynolds number remains constant even on further smoothening of the pipe

For a given Reynolds number, in a hydraulically smooth pipe, further smoothening __________ the friction factor. (A) Brings about no further reduction of (B) Increases (C) Decreases (D) None of these

Description : For a given Reynolds number, in a hydraulically smooth pipe, further smoothening __________ the friction factor. (A) Brings about no further reduction of (B) Increases (C) Decreases (D) None of these

Last Answer : (A) Brings about no further reduction of

Two piping system are said to be equivalent, when the __________ are same. (A) Fluid flow rate & friction loss (B) Length & friction factor (C) Diameter & friction factor (D) Length & diameter

Description : Two piping system are said to be equivalent, when the __________ are same. (A) Fluid flow rate & friction loss (B) Length & friction factor (C) Diameter & friction factor (D) Length & diameter

Last Answer : (A) Fluid flow rate & friction loss

Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement(A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Description : Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement. (A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Last Answer : (C) f1 > f2

A piezometer provided in the pipe measures (A) Friction factor (B) Static pressure (C) Dynamic pressure (D) None of these

Description : A piezometer provided in the pipe measures (A) Friction factor (B) Static pressure (C) Dynamic pressure (D) None of these

Last Answer : (B) Static pressure

In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Description : In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Last Answer : (D) Friction factor is independent of the relative roughness

The equation relating friction factor to Reynold number, f -0.5 = 4 loge (NRe /√f) -0.4 , is called the __________ equation. (A) Nikuradse (B) Von-Karman

Description : The equation relating friction factor to Reynold number, f -0.5 = 4 loge (NRe /√f) -0.4 , is called the __________ equation. (A) Nikuradse (B) Von-Karman

Last Answer : (B) Ergun's

Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Description : Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Last Answer : A) Pipe length

How can one estimate how the friction factor changes in heat exchanger tubes with a change in temperature?

Description : How can one estimate how the friction factor changes in heat exchanger tubes with a change in temperature?

Last Answer : Seider and Tate recommended the following for determine friction factors inside heat exchanger tubes with varying temperatures: First, determine the average, bulk mean temperature in the processing line. For example if ... 0.11 and for heating, it's divided by (bulk viscosity/wall viscosity)0.17.

Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head. (A) Manometric (B) Total (C) Static (D) Friction

Description : Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head. (A) Manometric (B) Total (C) Static (D) Friction

Last Answer : (A) Manometric

Fluidised beds are formed, when the (A) Fluid friction is zero (B) Gravity force is less than the fluid friction (C) Pressure forces equal gravity forces (D) Sum of the fluid friction and pressure forces is equal and opposite to gravity forces

Description : Fluidised beds are formed, when the (A) Fluid friction is zero (B) Gravity force is less than the fluid friction (C) Pressure forces equal gravity forces (D) Sum of the fluid friction and pressure forces is equal and opposite to gravity forces

Last Answer : (B) Gravity force is less than the fluid friction

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Requisites of a reversible process is that the (A) System and surroundings pressure be equal (B) Friction in the system should be absent (C) System and surroundings temperature be equal (D) None of these

Description : Requisites of a reversible process is that the (A) System and surroundings pressure be equal (B) Friction in the system should be absent (C) System and surroundings temperature be equal (D) None of these

Last Answer : B) Friction in the system should be absent

Ratio of actual indicated work to hypothetical indicated work in a steam engine is the (a) Indicated thermal efficiency (b) Friction factor (c) Mechanical efficiency (d) Diagram factor

Description : Ratio of actual indicated work to hypothetical indicated work in a steam engine is the (a) Indicated thermal efficiency (b) Friction factor (c) Mechanical efficiency (d) Diagram factor

Last Answer : Ans : d