Description : _______ is an implementation of multicast distance vector routing. It is asource-based routing protocol, based on RIP. A) MOSPF B) DVMRP C) CBT D) none of the above
Last Answer : DVMRP
Description : CBT isa ________ protocol that usesa core as the root of the tree. A) source-based B) group-shared C) a or b D) none of the above
Last Answer : group-shared
Description : The Routing Information Protocol (RIP) is an intradomain routing based on _________ routing. A) distancevector B) link state C) path vector D) none of the above
Last Answer : distancevector
Description : Multicast link state routing uses the _______ tree approach. A) source-based B) group-shared C) a or b D) none of the above
Last Answer : source-based
Description : In the _______ treeapproach, each router needs tohave oneshortest path tree for each group. A) group-shared B) source-based C) a or b D) none of the above
Description : RIP stands for ________ a. Reduced Information Protocol b. Routing Internet Protocol c. Routing Information Protocol d. Reduced Internet Protocol
Last Answer : c. Routing Information Protocol
Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above
Last Answer : link state
Description : In the group-shared tree approach,_________ involved in multicasting. A) only the core router is B) all routers are C) only some routers are D) none of the above
Last Answer : only the core router is
Description : ________ is an interdomain routingprotocol using path vector routing. A) BGP B) RIP C) OSPF D) none of the above
Last Answer : BGP
Description : The metric usedby _______ is the hopcount. A) OSPF B) RIP C) BGP D) none of the above
Last Answer : RIP
Description : The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii
Last Answer : B) i, and ii only
Description : Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii
Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above
Last Answer : All of theabove
Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number
Last Answer : d. Destination port number
Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way
Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way
Description : The ……… protocol is based on end-to- end delivery. a. SMTP b. TCP c. IP d. SCTP
Last Answer : a. SMTP
Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network
Last Answer : CSMA/CD is not suitable for a high propagation delay
Description : A bit-stuffing based framing protocol uses an 8-bit delimiter pattern of 01111110. If the output bit-string after stuffing is 01111100101, then the input bit-string is a. 0111110100 b. 0111110101 c. 0111111101 d. 0111111111
Last Answer : b. 0111110101
Description : The ______ protocol is based on end-to-end delivery. A. SCTP B. TCP C. SMTP D. SCTP
Last Answer : C. SMTP
Description : ________is a multiple-access method in which the available bandwidthof a link is shared in time, frequency, or through code, between different stations. A) Random access B) Controlledaccess C) Channelization D) none of the above
Last Answer : Channelization
Description : In _______ transmission, the channel capacity is shared byboth communicatingdevices at all times. A) simplex B) half-duplex C) full-duplex D) half-simplex
Last Answer : full-duplex
Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58
Last Answer : b. 0.184
Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation
Last Answer : c. multiplexing
Description : Communication channel is shared by all the machines on the network in ________ a) broadcast network b) unicast network c) multicast network d) anycast network
Last Answer : a) broadcast network
Description : MOSPF is a _______ protocol. A) data-driven B) command-driven C) both a and b D) none of the above
Last Answer : data-driven
Description : Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception ... message b. Provision of checksum computation c. Both a & b d. None of the above
Last Answer : Provision of sequence number in the header of message
Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC
Last Answer : c. Both CSMA/CD & CSMA/CA
Description : The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server
Last Answer : A. electronic mail, server (storage)
Description : The IP Control Protocol (IPCP) is the NCP for IP and is responsible for ………., …………., and disabling the IP protocol on both ends of the point-to-point link. A. Reframing , enabling B. Deleting, reframing C. configuring, enabling, D. configuring, reframing
Last Answer : C. configuring, enabling,
Description : The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above
Last Answer : B. RARP
Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC
Last Answer : C. Both CSMA/CD & CSMA/CA
Description : To sort an organism into a group based on shared traits is called?
Last Answer : Taxonomy
Description : A switchin a datagram network uses arouting tablethat is based on the ______address. A) source B) destination C) local D) none of the above
Last Answer : destination
Description : DTP computer abbreviation usually means ? DeskTop Publishing Data Type Programming Digital Transmission Protocol None Of above
Last Answer : Data Type Programming
Description : What does PPTP stand for ? Point to Point Transmission Protocol Point to Point Transfer Protocol Point to Point Tunneling Protocol Point to Point Traffic Protoco
Last Answer : Point to Point Tunneling Protocol
Description : A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface
Last Answer : between peers
Description : Which of the following is required to communicate between two computers? a. communications software b. protocol c. communication hardware d. all of above including access to transmission medium
Last Answer : all of above including access to transmission medium
Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing
Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data
Description : What is the number of separate protocol layers at the serial interface gateway specified by the X.25 standard? a. 4 b. 2 c. 6 d. 3 3. none of the above
Last Answer : 3
Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above
Last Answer : LLC
Description : The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : byte-oriented
Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : bit-oriented
Description : Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above
Last Answer : Selective-Repeat ARQ
Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ
Last Answer : Stop-and-Wait
Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ
Last Answer : Stop-and-Wait B) Simplest
Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above
Last Answer : ATM
Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)
Last Answer : neither (a) nor (b)
Description : IP is _________ datagram protocol. A) an unreliable B) a connectionless C) botha and b D) noneof the above
Last Answer : botha and b
Description : The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above
Last Answer : IP
Description : The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above
Last Answer : 2