__________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

__________ are mixed using ribbon blenders.
(A) Lumpy solids and low viscosity liquids
(B) Dry powders
(C) High viscosity liquids
(D) Thick pastes
by

1 Answer

Answer :

(B) Dry powders
by

Related questions

Ribbon blenders are exclusively meant for (A) Blending miscible liquids (B) Non-flowing powder and thin pastes (C) Bath mixing (D) Continuous mixing

Description : Ribbon blenders are exclusively meant for (A) Blending miscible liquids (B) Non-flowing powder and thin pastes (C) Bath mixing (D) Continuous mixing

Last Answer : (B) Non-flowing powder and thin pastes

Helical screw agitator is used for (A) Mixing highly viscous pastes (B) Blending immiscible liquids (C) Mixing liquids at very high temperature (> 250 °C) (D) None of these

Description : Helical screw agitator is used for (A) Mixing highly viscous pastes (B) Blending immiscible liquids (C) Mixing liquids at very high temperature (> 250 °C) (D) None of these

Last Answer : (A) Mixing highly viscous pastes

Highly viscous liquids & pastes are agitated by (A) Propellers (B) Turbine agitators (C) Multiple blade paddles (D) None of these

Description : Highly viscous liquids & pastes are agitated by (A) Propellers (B) Turbine agitators (C) Multiple blade paddles (D) None of these

Last Answer : (C) Multiple blade paddles

A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Description : A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Last Answer : (A) Produces mainly axial flow

____ dissolve in water and are made as powders, granules (small hard pieces), liquids, or other specialpurpose forms. a. Dyes c. Sweeteners b. Lakes d. Gums

Description : ____ dissolve in water and are made as powders, granules (small hard pieces), liquids, or other specialpurpose forms. a. Dyes c. Sweeteners b. Lakes d. Gums

Last Answer : a. Dyes

Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Description : Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Last Answer : d. Friction between dry surfaces

Coulomb friction is the friction between (A) Bodies having relative motion (B) Two dry surfaces (C) Two lubricated surfaces (D) Solids and liquids

Description : Coulomb friction is the friction between  (A) Bodies having relative motion  (B) Two dry surfaces  (C) Two lubricated surfaces  (D) Solids and liquids 

Last Answer : (A) Bodies having relative motion 

Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Description : Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Last Answer : (D) All 'a', 'b' & 'c

Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Last Answer : (A) Apron

Paddle agitator (A) Is suitable for mixing low viscosity liquids (B) Produces axial flow (C) Moves at very high speed (D) None of these

Description : Paddle agitator (A) Is suitable for mixing low viscosity liquids (B) Produces axial flow (C) Moves at very high speed (D) None of these

Last Answer : (A) Is suitable for mixing low viscosity liquids

Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Description : Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Last Answer : (C) Partial ionisation

Propellers are (A) Axial flow mixers (B) Low speed impeller (C) Used for mixing liquids of high viscosity (D) Radial flow mixers

Description : Propellers are (A) Axial flow mixers (B) Low speed impeller (C) Used for mixing liquids of high viscosity (D) Radial flow mixers

Last Answer : (A) Axial flow mixers

Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are called oils. (c) When hydrolyzed, they produce glycerol and carboxylate salts. (d) Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Description : Which of the following statements is not true about triacylglycerols? (a) When solids and semisolids at room temperature, they are called fats. (b) When liquids at room temperature, they are ... low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Last Answer : Triacylglycerols with low melting points are composed of saturated fatty acids, causing them to be liquids at room temperature

Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Last Answer : (B) Sticky (e.g. clay paste

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

The process by which fine solids is removed from liquids is termed as (A) Decantation (B) Flocculation (C) Sedimentation (D) Classification

Description : The process by which fine solids is removed from liquids is termed as (A) Decantation (B) Flocculation (C) Sedimentation (D) Classification

Last Answer : (C) Sedimentation

Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids

Description : Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids

Last Answer : (B) Solids from fluids

Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Description : Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Diaphragm pumps are used to transport (A) Solids (B) Liquids (C) Fluids (D) Slurries

Description : Diaphragm pumps are used to transport (A) Solids (B) Liquids (C) Fluids (D) Slurries

Last Answer : (D) Slurries

Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists(B) Smoke & fumes(C) Photochemical smog & soot(D) None of these

Description : Particulate' air pollutants are finely divided solids and liquids. Which of the following is not a ‘particulate’? (A) Dust & mists (B) Smoke & fumes (C) Photochemical smog & soot (D) None of these

Last Answer : (D) None of these

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Description : Kopp's rule is used to calculate the heat capacity of (A) Solids (B) Liquids (C) Gases (D) All (A), (B) & (C)

Last Answer : (A) Solids

Liquids having low viscosity are called?

Description : Liquids having low viscosity are called?

Last Answer : Mobile liquids eg : Water; Kerosene; Alcohol; Petro -

There are a multitude of various dressings available. Which of the following statement(s) is/are true concerning options for surgical dressings? a. Hydrocolloids, such as karaya compounds, offer the primary advantage of increased absorptive ability b. Films, such as Op-site, provide a water impermeable environment to achieve a dry wound c. Impregnates are fine gauze impregnated with a variety of substances such as antibiotics or moisturizing agents that adhere tightly to the wound and do not require a secondary dressing d. Absorptive powders and paste are highly useful in debriding necrotic and fibrous material from wounds and absorbing wound serum

Description : There are a multitude of various dressings available. Which of the following statement(s) is/are true concerning options for surgical dressings? a. Hydrocolloids, such as karaya compounds, offer ... are highly useful in debriding necrotic and fibrous material from wounds and absorbing wound serum

Last Answer : Answer: a, d Although the simplest dressing of gauze and tape combined with the use of antibacterial ointment can achieve moist wound healing in most patients. A multitude of other ... agents have high absorbency for tissue wound fluid and debride necrotic and fibrous material from the wound

Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Description : Vacuum filter is most suitable for the (A) Removal of fines from liquid (B) Liquids having high vapour pressure (C) Liquids of very high viscosity (D) None of these

Last Answer : (D) None of these

Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller(B) Helical screw(C) Flat blade turbine(D) Curved blade turbine

Description : Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller (B) Helical screw (C) Flat blade turbine (D) Curved blade turbine

Last Answer : (B) Helical screw

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Last Answer : (D) Screw

Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor.(A) Drag(B) Ribbon(C) Screw(D) Slat

Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat

Last Answer : (B) Ribbon

A thick liquid like syrup has a __________ viscosity than a light liquid like water. (A) Lesser (B) Greater (C) Same (D) None of these

Description : A thick liquid like syrup has a __________ viscosity than a light liquid like water. (A) Lesser (B) Greater (C) Same (D) None of these

Last Answer : Answer: Option B

What connections do you have between the reading and your Mixing Solids and Liquids investigation?

Description : What connections do you have between the reading and your Mixing Solids and Liquids investigation?

Last Answer : well reading is more diffrent then sold and liquid

What is the speed of particles in liquids compared to solids ?

Description : What is the speed of particles in liquids compared to solids ?

Last Answer : Liquid particles have a higher velocity than solids.

How did you separate the solids from the liquids?

Description : How did you separate the solids from the liquids?

Last Answer : Solids can often be removed from a liquid by filtering theliquid, or by settling, where solids either settle to the bottom orfloat to the top.

What seismic waves can travel through solids and liquids?

Description : What seismic waves can travel through solids and liquids?

Last Answer : What is the answer ?

What can liquids and gases do that solids can not?

Description : What can liquids and gases do that solids can not?

Last Answer : Need answer

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

Speed of sound is greater in solids than in liquids?

Description : Speed of sound is greater in solids than in liquids?

Last Answer : – Because the solids have high elasticity

A fractionating column is a glass apparatus used to (a) Separate magnetic solids from nonmagnetic solids (b) Separate a mixture in water (c) Separate two or more liquids (d) Extract oils from vegetable matter

Description : A fractionating column is a glass apparatus used to (a) Separate magnetic solids from nonmagnetic solids (b) Separate a mixture in water (c) Separate two or more liquids (d) Extract oils from vegetable matter

Last Answer : Ans:(c)

Which statement is false? (a) Many alkanes are soluble in water. (b) All alkanes have a lower density than water. (c) At room temperature some alkanes are liquids, some solids, some gases. (d) All alkanes burn

Description : Which statement is false? (a) Many alkanes are soluble in water. (b) All alkanes have a lower density than water. (c) At room temperature some alkanes are liquids, some solids, some gases. (d) All alkanes burn

Last Answer : Many alkanes are soluble in water

What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Description : What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Last Answer : b. It Is Faster

Why do gases expand faster than liquids and solids?

Description : Why do gases expand faster than liquids and solids?

Last Answer : Because the particles of gases are widely disturbed i.e. their particles are far apart from each other and they free to move. Other

Halitosis and a sour taste in the mouth are signs and symptoms associated most directly with a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour taste in the mouth are frequent complaints. b) achalasia. Achalasia presents as difficulty in swallowing both liquids and solids. c) gastroesophageal reflux. Gastroesophageal reflux presents as burning in the esophagus, indigestion, and difficulty in or pain upon swallowing. d) hiatal hernia. Hiatal hernia presents as heartburn, regurgitation, and dysphagia in many patients while at least 50% are asymptomatic.

Description : Halitosis and a sour taste in the mouth are signs and symptoms associated most directly with a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour ... as heartburn, regurgitation, and dysphagia in many patients while at least 50% are asymptomatic.

Last Answer : a) esophageal diverticula. Because the diverticula may retain decomposed food, halitosis and a sour taste in the mouth are frequent complaints.

Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Description : Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Last Answer : Answer: Option A

Which of the following have the highest thermal conductivities?  a. liquids  b. gases  c. metals  d. solids other than metals

Description : Which of the following have the highest thermal conductivities?  a. liquids  b. gases  c. metals  d. solids other than metals

Last Answer : metals

Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Description : Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Last Answer : Answer : a

During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Description : During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Last Answer : (A) Density of the liquid

Which of the following forced convection heat transfer equation accounts for the liquid viscosity effect for viscous liquids? (A) Dittus-Boelter equation (B) Sieder-Tate equation (C) Nusselt equation (D) None of these

Description : Which of the following forced convection heat transfer equation accounts for the liquid viscosity effect for viscous liquids? (A) Dittus-Boelter equation (B) Sieder-Tate equation (C) Nusselt equation (D) None of these

Last Answer : (B) Sieder-Tate equation