Description : An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch, (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %
Last Answer : Answer: Option D
Description : An error of 1% in measuring head over the apex of the notch (H) will produce an error of _________ in discharge over a triangular notch. (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %
Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)
Last Answer : Answer: Option C
Description : The discharge over the trapezoidal notch is equal to the discharge over the rectangular notch __________ the discharge over the triangular notch. (A) Plus (B) Minus (C) Divide (D) None of these
Last Answer : Answer: Option A
Description : The discharge over a triangular notch is A) Inversely proportional to H 3/2 B) Directly proportional to H 3/2 C) Inversely proportional to H 5/2 D) Directly proportional to H 5/2
Description : What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°
Last Answer : (C) 90°
Description : What is the volume of a right prism standing on a triangular base of sides 5 cm, 5 cm and 8 cm whose lateral surface area is 828 cm^2 ? -Maths 9th
Last Answer : Lateral surface area of a prism = Perimeter of base Height ⇒ 840 = (5 + 5 + 8) Height ⇒ Height = 8401884018 = 46 cm. = Semi perimeter of the triangular base = 182182 = 9 cm ∴ Area of triangle = 9(9- ... 4 1 = 12 cm2 ∴ Required volume of prism = Area of base Height = (12 46) cm3 = 552cm3
Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)
Description : A notch is used to measure __________ of liquids. (A) Pressure (B) Discharge (C) Velocity (D) Volume
Last Answer : Answer: Option B
Description : If the coefficient of discharge is 0.6, then the discharge over a right angled notch is (A) 0.417 H 5/2 (B) 1.417 H 5/2 (C) 4.171 H 5/2 (D) 7.141 H 5/2
Description : The discharge over a rectangular notch is (A) Inversely proportional to H 3/2 (B) Directly proportional to H 3/2 (C) Inversely proportional to H 5/2 (D) Directly proportional to H 5/2
Description : A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal
Last Answer : (A) Circular
Description : The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H
Description : The discharge over a right angled notch is (where H = Height of liquid above the apex of notch) (A) (8/15) Cd. 2g. H (B) (8/15) Cd. 2g. H3/2 (C) (8/15) Cd. 2g. H² (D) (8/15) Cd. 2g. H5/2
Description : The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3
Last Answer : (C) H5/2
Description : A depth-discharge relationship of the canal section is maintained at a notch fall because the sill of the notches is : a) Level with downstream canal bed b) Below the upstream canal bed c) Level with upstream canal bed d) Above the upstream canal bed
Last Answer : c) Level with upstream canal bed
Description : The rate of a chemical reaction is almost doubled for every 10°C rise in temperature. The rate will increase __________ times, if the temperature rises from 10 to 100°C. (A) 256 (B) 512 (C) 112 (D) 612
Last Answer : (B) 512
Description : The base of a right triangular prism is an equilateral triangle. If the height is halved and each side of the base is doubled, find the ratio of the -Maths 9th
Last Answer : 1 : 2 Let each side of the base of the original prism be a units and the height of the prism be h units. Then Required ratio = Vol. of original prismVol. of new prismVol. of original ... )2×h3√4×(2a)2×h234×(a)2×h34×(2a)2×h2 = 2a2h4a2h2a2h4a2h = 1 : 2.
Description : If the head is doubled in & centrifugal pump, the power required will increase in the ratio of (A) 23 (B) 23/2 (C) 25/2 (D) 21/3
Last Answer : B) 23/2
Description : Tom volunteered to be the chief organizer for the world's tether ball championships. There were 657 contestants from around the world. The tournament was set up whereby the winner would advance and ... round. How many matches will Tom have to schedule to determine the tether ball champion? -Riddles
Last Answer : 656 matches will be needed.
Description : is 3.657 with the 57 repeating rational?
Last Answer : Yes, the number 57 is a rational number, as it can be written as a fraction.
Description : Which of the following regulates the ownership and operation of radio and television stations in the country? A. PD 576-A B. PD 756 C. PD 657 D. PD 677
Last Answer : A. PD 576-A
Description : What is the hexadecimal representation of (657)8 ? (a) 1 AF (b) D 78 (c) D 71 (d) 32 F
Last Answer : 1 AF is the hexadecimal representation of (657)8 .
Description : A hydrogen like gas emits radiation of wavelengths `460 Å, 828 Å` and `1035Å`, only. Assume thar the atoms have only two excited states and the differ
Last Answer : A hydrogen like gas emits radiation of wavelengths `460 Å, 828 Å` and `1035Å`, only. Assume ... of the ground state and the first excited state.
Description : What is bigger 0.828 or 0.882?
Last Answer : 0.882 is bigger than 0.828
Description : The height of the tallest building in the world is: (a) 601 meter (b) 632 meter (c) 828 meter (d) None of these
Last Answer : (c) 828 meter
Description : If the rate of gain of radial acceleration is 0.3 m per sec3 and full centrifugal ratio is developed. On the curve the ratio of the length of the transition curve of same radius on road and railway, is (A) 2.828 (B) 3.828 (C) 1.828 (D) 0.828
Last Answer : (A) 2.828
Description : In an competitive examination, the average was found to be 72 marks. After detecting the errors the marks of 94 candidates had to be charged from 90 to 66 each, and the average is reduced to 64 marks. Find the total number of candidates who took the exam. A) 282 B) 382 C) 828 D) 200
Last Answer : A) let the number of candidates be A total marks of candidates = 72A after detecting error the change of marks for one candidate = 90 - 66 = 24 marks change of marks for 94 candidates = 94*24 = ... after detecting error of N candidates = 64A then, 72A- 2256= 64A , 8A=2256 A=282
Description : If the velocity of flow as well as the diameter of the flowing pipe are respectively doubled through a pipe system in use since long, the head loss will thereafter be (a) Halved (b) Doubled (c) Increased 4 times (d) No change
Last Answer : (b) Doubled
Description : How do I release a screw whose head is flush with the surface and the notch is so worn down that the screwdriver can't make contact?
Last Answer : Sometimes I have had success re- tapping the head of the screw. Using a hammer and screwdriver like a chisel. Also a but of wd-40 under the screw helps.
Description : Volute type of casing is provided in a centrifugal pump to (A) Convert velocity head to pressure head (B) Convert pressure head to velocity head (C) Reduce the discharge fluctuation (D) Increase the discharge
Last Answer : (D) Increase the discharge
Description : Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid ... and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate
Last Answer : Option D
Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute. (A) 500 (B) 200 (C) 1000 (D) 750
Last Answer : (A) 500
Description : If depth of a beam is doubled then changes in its section modulus a. Will remain same b. Will decrease c. Will be doubled d. Will increase by 4 times
Last Answer : d. Will increase by 4 times
Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above
Last Answer : (D) All the above
Description : Horsepower increase of a centrifugal gas compressor without altering the volumetric flow rate will __________ the gas discharge pressure. (A) Increase (B) Decrease (C) Not change (D) Exponentially decrease
Last Answer : (A) Increase
Description : The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95
Last Answer : (D) 0.95
Description : In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth
Description : The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double
Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section
Last Answer : <!-- [endif] -->Knife Section
Description : For a ternary mixture, in which equilateral triangular co-ordinate is used in leaching and extraction, a __________ of the equilateral triangular co-ordinates. (A) Binary mixture is ... Ternary mixture is represented by the sides (D) Pure component is represented by the apex
Last Answer : (D) Pure component is represented by the apex
Description : In triangular co-ordinates, the ternary composition point falls __________ of the triangle. (A) In the corners (B) Inside (C) On the sides (D) None of these
Last Answer : (B) Inside
Description : For laminar flow of a shear thinning liquid in a pipe, if the volumetric flow rate is doubled, the pressure gradient will increase by a factor of (A) 2 (B) < 2 (C) > 2 (D) 1/2
Last Answer : (A) 2
Description : 6 A patient of chronic bronchial asthma was maintained on oral prednisolone 20 mg/day for 3 months. It was decided to switch him over to inhaled beclomethasone dipropionate 200 μg 4 times a day. What should ... week and then tapered D. Its dose should be doubled for one week and then tapered (p. 2
Last Answer : C. It should be given at the same dose for one week and then tapered
Description : The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75
Last Answer : (b) 2.25
Description : A structure used to dam up a stream or river over which the water flows is called (A) Orifice (B) Notch (C) Weir (D) Dam
Description : 4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes
Description : The value of 'n' for a chemical reaction A → B, whose reaction rate is → CA n , will be __________ if the rate of the reaction increases by a factor of 8, when the concentration of is doubled. (A) 0 (B) 1 (C) 2 (D) 3
Last Answer : (D) 3
Description : Open channel liquid flow is most conveniently measured by a (A) Hot wire anemometer (B) Notch (C) Rotameter (D) Segmental orifice
Last Answer : (B) Notch