The discharge over a right angled notch is (where H = Height of liquid above the apex of notch) (A) (8/15) Cd. 2g. H (B) (8/15) Cd. 2g. H3/2 (C) (8/15) Cd. 2g. H² (D) (8/15) Cd. 2g. H5/2

The discharge over a right angled notch is (where H = Height of liquid above the apex of notch)
(A) (8/15) Cd. 2g. H
(B) (8/15) Cd. 2g. H3/2
(C) (8/15) Cd. 2g. H²
(D) (8/15) Cd. 2g. H5/2
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Description : The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Last Answer : (C) H5/2

The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Description : The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Last Answer : Answer: Option C

If the coefficient of discharge is 0.6, then the discharge over a right angled notch is (A) 0.417 H 5/2 (B) 1.417 H 5/2 (C) 4.171 H 5/2 (D) 7.141 H 5/2

Description : If the coefficient of discharge is 0.6, then the discharge over a right angled notch is (A) 0.417 H 5/2 (B) 1.417 H 5/2 (C) 4.171 H 5/2 (D) 7.141 H 5/2

Last Answer : Answer: Option B

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

An error of 1% in measuring head over the apex of the notch (H) will produce an error of _________ in discharge over a triangular notch. (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Description : An error of 1% in measuring head over the apex of the notch (H) will produce an error of _________ in discharge over a triangular notch. (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Last Answer : Answer: Option D

The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of discharge) (A) Q = (2/3) Cd × b × (2g) × (H2 - H1) (B) Q = (2/3) Cd × b × (2g) × (H2 1/2 - H1 1/2) (C) Q = (2/3) Cd × b × (2g) × (H2 3/2 - H1 3/2) (D) Q = (2/3) Cd × b × (2g) × (H2 2 - H1 2 )

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/(D) 1.71 Cd × L × H 3/

Description : The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/ (D) 1.71 Cd × L × H 3/

Last Answer : Answer: Option D

If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Description : If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Last Answer : (A) h²/2l

A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A × d × a × 2g) (B) 2A × d × a × 2g) (C) 2A × - d × a × 2g) (D) 2A × 3/2 - 3/2)/Cd × a × 2g)

Description : A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A d a 2g) (B) 2A d ... 2g) (C) 2A - d a 2g) (D) 2A 3/2 - 3/2)/Cd a 2g)

Last Answer : Answer: Option C

An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch, (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Description : An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch, (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Last Answer : Answer: Option D

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by (A) dQ/Q = (1/2) × (dH/H) (B) dQ/Q = (3/4) × (dH/H) (C) dQ/Q = (dH/H) (D) dQ/Q = (3/2) × (dH/H)

Last Answer : Answer: Option D

The discharge over a triangular notch is A) Inversely proportional to H 3/2 B) Directly proportional to H 3/2 C) Inversely proportional to H 5/2 D) Directly proportional to H 5/2

Description : The discharge over a triangular notch is A) Inversely proportional to H 3/2 B) Directly proportional to H 3/2 C) Inversely proportional to H 5/2 D) Directly proportional to H 5/2

Last Answer : Answer: Option D

The discharge over a rectangular notch is (A) Inversely proportional to H 3/2 (B) Directly proportional to H 3/2 (C) Inversely proportional to H 5/2 (D) Directly proportional to H 5/2

Description : The discharge over a rectangular notch is (A) Inversely proportional to H 3/2 (B) Directly proportional to H 3/2 (C) Inversely proportional to H 5/2 (D) Directly proportional to H 5/2

Last Answer : Answer: Option B

The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Description : The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a triangular notch is given by (A) dQ/Q = 3/2 × (dH/H) (B) dQ/Q = 2 × (dH/H) (C) dQ/Q = 5/2 × (dH/H) (D) dQ/Q = 3 × (dH/H)

Last Answer : Answer: Option C

If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Description : If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Last Answer : (D) 3 m

The velocity of jet of water travelling out of opening in a tank filled with water is proportional to (A) Head of water (h) (B) h² (C) V/T (D) h/2

Description : The velocity of jet of water travelling out of opening in a tank filled with water is proportional to (A) Head of water (h) (B) h² (C) V/T (D) h/2

Last Answer : Answer: Option C

The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Description : The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Last Answer : Answer: Option A

When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a = Area of mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.5 a. gH (B) 0.707 a. gH (C) 0.855 a. gH (D) a. gH

Description : When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a = Area of mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.5 a. gH (B) 0.707 a. gH (C) 0.855 a. gH (D) a. gH

Last Answer : Answer: Option A

The discharge over the trapezoidal notch is equal to the discharge over the rectangular notch __________ the discharge over the triangular notch. (A) Plus (B) Minus (C) Divide (D) None of these

Description : The discharge over the trapezoidal notch is equal to the discharge over the rectangular notch __________ the discharge over the triangular notch. (A) Plus (B) Minus (C) Divide (D) None of these

Last Answer : Answer: Option A

When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Description : When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Last Answer : Answer: Option A

A notch is used to measure __________ of liquids. (A) Pressure (B) Discharge (C) Velocity (D) Volume

Description : A notch is used to measure __________ of liquids. (A) Pressure (B) Discharge (C) Velocity (D) Volume

Last Answer : Answer: Option B

A depth-discharge relationship of the canal section is maintained at a notch fall because the sill of the notches is : a) Level with downstream canal bed b) Below the upstream canal bed c) Level with upstream canal bed d) Above the upstream canal bed

Description : A depth-discharge relationship of the canal section is maintained at a notch fall because the sill of the notches is : a) Level with downstream canal bed b) Below the upstream canal bed c) Level with upstream canal bed d) Above the upstream canal bed

Last Answer : c) Level with upstream canal bed

If the head over the triangular notch is doubled, the discharge will increase by __________ times. (A) 2 (B) 2.828 (C) 5.657 (D) 4

Description : If the head over the triangular notch is doubled, the discharge will increase by __________ times. (A) 2 (B) 2.828 (C) 5.657 (D) 4

Last Answer : (C) 5.657

ABC is an acute angled triangle. CD is the altitude through C. If AB = 8 units, CD = 6 units, find the distance -Maths 9th

Description : ABC is an acute angled triangle. CD is the altitude through C. If AB = 8 units, CD = 6 units, find the distance -Maths 9th

Last Answer : answer:

What is the value of h in a right angled triangle with 31° and 15cm?

Description : What is the value of h in a right angled triangle with 31° and 15cm?

Last Answer : Following the symbols in the image:Assuming 15cm corresponds to a (the line adjacent to the angle), then you need to use the cosine formulacos(ø) = a/hcos(31º) = 15cm/hh*cos(31º) = (15cm/h) * hh*cos(31º) = 15cm * 1h*cos(31º)/cos(31º) = 15cm/cos(31º)h*1 = 15cm/cos(31º)h = 16.398

The theoretical velocity of jet at vena contracta is (where H = Head of water at vena contracta) (A) 2gH (B) H × g) (C) 2g × H (D) 2gh)

Description : The theoretical velocity of jet at vena contracta is (where H = Head of water at vena contracta) (A) 2gH (B) H × g) (C) 2g × H (D) 2gh)

Last Answer : Answer: Option D

What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°

Description : What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : (C) 90°

An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice(D) None of these

Description : An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice (D) None of these

Last Answer : Answer: Option B

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

The loss of head at entrance in a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Description : The loss of head at entrance in a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Last Answer : Answer: Option B

The loss of head at exit of a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Description : The loss of head at exit of a pipe is (where v = Velocity of liquid in the pipe) (A) v²/2g (B) 0.5v²/2g (C) 0.375v²/2g (D) 0.75v²/2g

Last Answer : Answer: Option A

What is the surface area of the right prism height 6 and 8 19 Apex?

Description : What is the surface area of the right prism height 6 and 8 19 Apex?

Last Answer : What is the answer ?

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

The C.G. of a plane lamina will not be at its geometrical centre in the case of a (A) Right angled triangle (B) Equilateral triangle (C) Square (D) Circle

Description : The C.G. of a plane lamina will not be at its geometrical centre in the case of a  (A) Right angled triangle  (B) Equilateral triangle  (C) Square  (D) Circle

Last Answer : (A) Right angled triangle 

What is Sword Art H5 Game?

Description : What is Sword Art H5 Game?

Last Answer : Sword Art H5 is my playing web game, launched Instantfuns! Doyou know it?

What is Sword Art H5 Game?

Description : What is Sword Art H5 Game?

Last Answer : Sword Art H5 is my playing web game, launched Instantfuns! Doyou know it?

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Last Answer : Answer: Option C

09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Description : 09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Last Answer : A

According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Description : According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Last Answer : Answer: Option A

Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. What is the proportion of the solution Y in the liquid in the tank after 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13

Description : Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. ... 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13

Last Answer : a Part of the tank filled by pipe P in 1 minute = 1 / 40 Part of the tank filled by pipe Q in 1 minute = 1 / 15 Part of the tank filled by pipe R in 1 minute = 1/ 30 Here we have to find the proportion of ... together in 5 minute = 5 1/8 = 5/ 8 Required proportion = (1/3) / ( 5/8) = 8 / 15

A structure used to dam up a stream or river over which the water flows is called (A) Orifice (B) Notch (C) Weir (D) Dam

Description : A structure used to dam up a stream or river over which the water flows is called (A) Orifice (B) Notch (C) Weir (D) Dam

Last Answer : Answer: Option C

4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Description : 4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Last Answer : Answer: Option B

The turns ratio of transformer 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Description : The turns ratio of transformer 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Last Answer : Answer: A

The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Last Answer : Answer: A

Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance) (A) Cc × Cv (B) Cc × Cr (C) Cv × Cr (D) Cc /Cr

Description : Coefficient of discharge Cd is equal to (where Cc = Coefficient of contraction, Cv = Coefficient of velocity, and Cr = Coefficient of resistance) (A) Cc × Cv (B) Cc × Cr (C) Cv × Cr (D) Cc /Cr

Last Answer : Answer: Option A

Open channel liquid flow is most conveniently measured by a (A) Hot wire anemometer (B) Notch (C) Rotameter (D) Segmental orifice

Description : Open channel liquid flow is most conveniently measured by a (A) Hot wire anemometer (B) Notch (C) Rotameter (D) Segmental orifice

Last Answer : (B) Notch

The C.G. of a right circular solid cone of height h lies at the following distance from the base (A) h/2 (B) J/3 (C) h/6 (D) h/4

Description : The C.G. of a right circular solid cone of height h lies at the following distance from the base  (A) h/2  (B) J/3  (C) h/6  (D) h/4 

Last Answer : (D) h/4 

If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total discharge Q, the settling velocity, is (A) Q/H(B) Q/D(C) Q/(D × B) (D) Q/(L × B)

Description : If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total  discharge Q, the settling velocity, is  (A) Q/H (B) Q/D (C) Q/(D × B)  (D) Q/(L × B) 

Last Answer : (D) Q/(L × B) 

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C